10 Reasons Your Sublimation is Dull (and how to make it vibrant!)

Рет қаралды 50,935

Күн бұрын

Have you ever experienced dull sublimation projects? Want to make your sublimation vibrant and your colors really pop? Well, I have 10 tips for you in this video. Go through each one to see why your sublimation is dull, then try these tips for your sublimation crafts. You may find that you get those vibrant colors from sublimation that you have been looking for!
Get the free rainbow flower file bundle here: angie-holden.ck.page/3a195a6e13
Links below may be affiliate links.
Supplies:
Sublimation printer • The Best Sublimation P...
Sublimation ink • Sawgrass Ink Guide: Wh...
Sublimation paper amzn.to/3gZCaCx
Heat press www.thecountrychiccottage.net...
Lint Roller amzn.to/325oT3F
Heat Resistant Tape www.thecountrychiccottage.net...
Protective Paper www.thecountrychiccottage.net...
Heat resistant gloves amzn.to/3bfvjm8
Tape Dispenser amzn.to/3GTQGb1
Join Sublimation Prep: www.sublimationprep.com/
Other videos you may enjoy:
Manual Color Correction for an Epson EcoTank • Sublimation Printer Se...
ICC Profiles for an Epson EcoTank • How and Why to Use ICC...
Be sure to follow me on social as well!
Instagram / angieholdenmakes
Facebook / angieholdenmakes
TikTok / angieholdenmakes
Sign up for our free sublimation class here: lingering-pine-4030.ck.page/6...
Join my sublimation Facebook group here: / sublimationmadesimple
#sublimation #sublimationdull #vibrantsublimation
0:00 Introduction
0:56 Tip 1
3:42 Tip 2
5:00 Tip 3
5:35 Tip 4
6:16 Tip 5
8:00 Tip 6
11:47 Tip 7
13:31 Tip 8
14:10 Tip 9
15:05 Tip 10
16:59 Bonus Tip
18:14 Where to start
19:33 Wrap up

Пікірлер: 144

@parisharrison6639 Жыл бұрын

I really appreciate your videos. KZfaq is the only place to get information and relay on you all the time. Thank you

@lindaz.585 Жыл бұрын

This was so helpful! Thank you!

@aixaolivo5840 Жыл бұрын

You’re awesome Angie! Thanks so much for this video and great info! ❤

@AngieHolden Жыл бұрын

You are so welcome!

@robinmoreno1066 Жыл бұрын

Thank you for the valued time taken to help us understand these creative processes. This content is so worth my time!

@AngieHolden Жыл бұрын

Glad you enjoy it!

@trishfrench1927 8 ай бұрын

I press my sublimation paper for a few seconds also in the summer time when we have such high humidity

@AngieHolden 8 ай бұрын

That is a great idea!

@chezandrews5042 6 ай бұрын

Great explanations, Thanks Angie xo

@AngieHolden 6 ай бұрын

Thanks for watching!

@whichcraftLiz 10 ай бұрын

excellent video! Thank you for all this information!

@AngieHolden 10 ай бұрын

Glad you enjoyed it!

@victoriabaysdell5914 Жыл бұрын

Just watched, thank you Angie very informative!!

@AngieHolden Жыл бұрын

You are so welcome!

@goldberie1 11 ай бұрын

Thank you for another awesome video. I needed this information today and it was a big help. I haven’t pressed anything lately and had forgotten some things. Thanks again!

@AngieHolden 11 ай бұрын

Glad it was helpful!

@normazaharioudakis115 Жыл бұрын

Thank you for sharing I’ve learned so much from you😊

@AngieHolden Жыл бұрын

I'm so glad!

@ohiorichkidbeats 7 ай бұрын

Thank you Angie ' this video was extremely helpful, the polyester content and color really was the key.. as always, thank you love'

@AngieHolden 7 ай бұрын

Happy to help!

@dwinters2881 2 ай бұрын

Very helpful as always!

@AngieHolden 2 ай бұрын

Glad you think so!

@LisaVornhagen Жыл бұрын

This was such a great video! Your information is very thorough, detailed and easy to understand. I hope to get a sublimation printer in the future, so this really helps. I never thought of removing moisture from a solid object like a coaster. I will definitely do that from now on. Thank you!

@AngieHolden Жыл бұрын

Best of luck!

@tonyramirez7029 Жыл бұрын

Thank you Angie!!!!

@AngieHolden Жыл бұрын

Thanks for watching!

@lindap899 11 ай бұрын

Thank you for this informative video. I'm a sublimation rookie, so your tips really help.😀

@AngieHolden 11 ай бұрын

Great to hear!

@najmamahboob3678 Жыл бұрын

very in formative, thank you

@AngieHolden 11 ай бұрын

Glad it was helpful!

@star_rose_three Жыл бұрын

It's just like when people send me photos via FB. Facebook compresses your photos so I always ask people to email me the photos directly and usually that takes care of the resolution issues

@AngieHolden Жыл бұрын

Facebook DEFINITELY compresses them!

@ryoung5592 4 ай бұрын

Thank you i think this will help so much

@AngieHolden 4 ай бұрын

I hope so!

@jackieh.8453 Жыл бұрын

We just purchased a Cricut and I have learned so much about it from you. Your tutorials are the best out there. You explain in detail and if we have any problems at all we can find the answer from one of your tutorials. Thank you for all the work you put into your channel ♥

@AngieHolden Жыл бұрын

Awesome! Thank you!

@kawestley1965 11 ай бұрын

I've been submation for a yeR or two and thankful you you cleared a couple thinks for me

@AngieHolden 11 ай бұрын

So glad it helped!

@kflorence2219 Жыл бұрын

thank you for the great infomation!

@AngieHolden Жыл бұрын

Glad it was helpful!

@RealPraise24 Жыл бұрын

Thanks Angie 👍🏽🥰

@AngieHolden Жыл бұрын

No problem 😊

@anitaulmer Жыл бұрын

Thank you so much for all of these sublimation videos. I've had my SG500 for a while but not really used it. I'm going to dust it off and get to testing and using it this week. I absolutely love your content! 🤗

@Jemmyjo Жыл бұрын

You will fall in love with it!

@wendyvalerie6624 Жыл бұрын

Happy for you.

@joycepugh5347 11 ай бұрын

TYVM for this awesome share

@AngieHolden 11 ай бұрын

Thanks for the visit!

@elizabethvallely4044 11 ай бұрын

Thank you Angie great video with awesome infor and tips very helpful!!! Hugs Liz 😊

@AngieHolden 11 ай бұрын

You are so welcome!

@suspow1267 8 ай бұрын

Thanks for sharing xx

@AngieHolden 8 ай бұрын

Thanks for watching!

@sherriblackmon5139 11 ай бұрын

I understand these details much better and also my f170 printer. I only use Epson for my f170

@gloriamorales-jy3db 5 ай бұрын

Angie, thank you so much for putting out this video!! You touched lightly on an issue I have and I cannot get any answers. I have f170 and u are correct, there are limitations in the printer settings. My issue is printing the color on my image I created. In other words. I want teal to print and not a plain ugly green color. When it comes to red, teal, black, gold…. My printer changes the color. Thank you so much!!! I bought the wrong printer for what I want! Live and learn. Please don’t stop putting out more informative and training videos. We really appreciate them. God bless!

@CarolynDorr 2 ай бұрын

I have found with my F170, I have to make sure I have ICM checked to get the colors shown on my monitor. I print directly from my computer and use the printer settings.

@kasyucraft 9 ай бұрын

Thank you for telling us about the reasons.

@hristinadimova 7 күн бұрын

Thank you for all the advice. I converted an Epson ET with hiipoo inks and still have full prints . Btw my pink turned orange 😂 so I am off to your other video to see how to fix it . And need to play more with the settings but I use Mac and have already watched and done the suggested settings . Wish me luck 🤞🏻🤞🏻

@AngieHolden 7 күн бұрын

Good luck!

@dayannarodriguez538 9 ай бұрын

I was having humid issues with my sublimations and I had no idea that it was the problem. I really apreciate your video explanation.

@AngieHolden 9 ай бұрын

Any time!

@trishfrench1927 8 ай бұрын

We have high humidity in the summer. I press my sublimation paper for a few seconds also, this seems to help a lot.

@TheBinklemNetwork Ай бұрын

Just learned this as well! From the swamps of ginia

@TheBinklemNetwork Ай бұрын

@@trishfrench1927do you press the paper then print to it?

@trishfrench1927 Ай бұрын

@@TheBinklemNetwork Hi! Yes, I press it for a few seconds to remove the humidity and then print. If it has too much humidity, it can cause a paper jam, at least that's been my experince. Have ann awesome day :)

@jenniferblackwell2191 Жыл бұрын

I just look forward to seeing all your videos they're so informative ❤ and since I just started sublimating they've been really helpful! Do you know where I can find that color chart you did for testing your heat press times and at different temperatures to see how each color presses?

@AngieHolden Жыл бұрын

I have not released that for use. It is a part of my sublimation course.

@robinmangini1469 10 ай бұрын

YOU are by far my favorite instructor - I always say, I’ll only listen to Angie..lol. You didn’t mentioned anything about “downloading drivers” - doesn’t that had a lot to do with color? Thanks 😊

@AngieHolden 10 ай бұрын

You just want to grab the driver from Epson and not let your computer find one. The color comes with ICC profiles and color correction. kzfaq.info/get/bejne/nttglZd_ttXWZok.html

@darlahpotechin1668 Жыл бұрын

There are many really good programs that ups the-resolution that I use -Remini, cutout pro etc plus I use on1 but have photoshop. Enhancing photos are so common, I can’t tell what is real and what is not.

@vincebaker3384 Жыл бұрын

Great video I learned a lot you didn't touch on sublimating on stainless steel uncoded or coded I've seen blanks that say they're sublimation blank but it just looks like they're stainless steel can you sublimate on these and if so will you run into the same problems as sharpness of your sublimation not being good because the coating is not white

@AngieHolden Жыл бұрын

There are sublimation blanks that are steel. And yes I run into the same issue as with something that is frosted.

@Jemmyjo Жыл бұрын

I believe you can change the resolution of a photo in photoshop, which is expensive but there is also Gimp, which is free, and you can change your resolution a few ways in it.Gimp is free.

@AngieHolden Жыл бұрын

Oh good to know! I do have photoshop but I try not to use it a ton as I know most people cannot afford it.

@Jemmyjo 11 ай бұрын

@@AngieHolden you’re welcome. I am all about those free options!

@tinaupnorth 11 ай бұрын

Increasing DPI (resolution) in Photoshop doesn't increase the QUALITY. It requires a lot of work and knowledge, and even then it may not be perfect. Increasing DPI causes more blur and pixalation

@Jemmyjo 11 ай бұрын

@@tinaupnorth are you using gimp also?

@GaryDaBussy 8 күн бұрын

@@Jemmyjo It doesn't matter what software, you can't increase resolution once it's been lowered. You can artificially increase the resolution, but the software basically blurs the image to compensate for the missing data that you're trying to force it to create.

@MelissaGonzalez-lb7xd 2 ай бұрын

Thank you for the informative videos. I have been searching for a video that will help with glass tumbler sublimation. I have paper or tape marks on my glass and don't know what I'm doing wrong. I am also wondering if there is a way to remove those marks from my glass tumbler. Any info/direction will help. Thanks again! 😊

@AngieHolden 2 ай бұрын

It may be the blank you are using. You could try another brand. Otherwise, you can try spray adhesive instead of tape.

@celtic5764 9 ай бұрын

I finally got my EPSON Eco Tank ET 2720 out of it’s box since I bought it like 4 years ago. This is probably the cheapest route I could afford. I have done a lot of researching so I know what I can and can’t sublimate on and even though I haven’t sublimate on anything I have told a lot of people 90% of what you just said in this video. I feel like I’m a broken record when I say you can’t sublimate on cotton or dark fabric unless you have some sort of polyester and or polyester with some sort of a white coating or base to sublimate on darks. I’m trying to think what is the right sublimation ink to buy. Thanks for your time…

@AngieHolden 9 ай бұрын

I do like Hiipoo ink in my converted printer but there are other brands that seem to have good reviews as well.

@jilliej7 4 ай бұрын

Angie, help. Printable HTV When I put the transfer tape (sheet) I can’t get it to stick enough. I’ve used PPD & Siser Printable HTV. What am I doing wrong? What is the best, in your opinion, to get PHTV to come off on the transfer sheet. And best transfer tape (sheet). Thks so much. Love your videos!!!!

@AngieHolden 4 ай бұрын

I like the KTM mask from Heat Transfer Warehouse. This is a common issue and none of them are great. You still may have to work with it.

@sharonnowak2077 Жыл бұрын

Angie

@marjoriecramer9102 Жыл бұрын

Hi Angie. Great video. Can you tell me how to correct fonts that come out blurry? The color looks great but the font looks smudged.

@AngieHolden Жыл бұрын

When I gave the example of too much heat, my text was extremely hard to read as it was blurry. I would play on some fabric with time/temp/pressure.

@DesertWreathCreations 4 ай бұрын

Hi Jennifer love all you advice. I use a Epson SC500 series sublimation printer "I print metal signs and just recently I been experiencing a film on my signs I print. Any advice would be helpful. I have taken 2 days doing adjustment "temp, time, perheating"

@AngieHolden 4 ай бұрын

Make sure there is not a film on them that should be removed before you sublimate. Otherwise, I would say you got a bad batch of signs.

@DesertWreathCreations 4 ай бұрын

Thank you, that's what I was thinking. @@AngieHolden

@suzannetorres6652 6 ай бұрын

Hi Angie! Love your tutorials! I'm new to sublimation and having a blast! I am struggling, however, that my reds are not printing true (pinkish) on my mugs and tumblers. I am using Eco Tank 8550. I did a swatch on a ceramic mug on different reds, but they all come out in different shades of red. Can you assist?

@AngieHolden 6 ай бұрын

I would try color correction on an ICC profile for printing.

@teresam2403 4 ай бұрын

So I have a real big question I had got a mug & tumbler press I printed my image for my tumbler had it all set and ready to go and the new press did not work so I had to return it and wait for a new one in the mean time I left the tumbler wrapped with the image for a few weeks before I got to press it and all my colors are off like yellowish green did I not heat it right or long enough or was it due to leaving it on the tumbler for that length of time before subing it and should I try to redo over what is there! Got any ideas?

@AngieHolden 4 ай бұрын

You can press prints weeks after, however, you do need to store them properly. It may have gotten messed up during the time you stored it. I would probably press to some scrap fabric to check things.

@kathysmithson9853 7 ай бұрын

Angie - Do you recommend a rotisserie convection oven for tumblers?

@AngieHolden 7 ай бұрын

Try this: kzfaq.info/get/bejne/i7B9h7Z1ssinh5c.html

@eunique7997 27 күн бұрын

Thank you so much for this video... So I don't have to use sublimation ink in my epson? Will the original ink work fine? I just purchased the printer and it was suggested that I purchase sublimation ink.

@AngieHolden 23 күн бұрын

The original ink that came with your printer is for everyday printing. If you want to do sublimation, you need sublimation ink that does NOT come with an Epson EcoTank. If you got the Epson F170 or F570, then you did get sublimation ink with the printer.

@ohiorichkidbeats 7 ай бұрын

Angie.. when you screenshot a picture,say off of instagram,does that lower the resolution?

@AngieHolden 7 ай бұрын

Definitely! Those generally do not work well.

@ufoquilter86 Жыл бұрын

Great information. Where can I find the sublimation color chart? I would love to print

@AngieHolden Жыл бұрын

Sorry. I have not released that yet! It is a part of my sublimation course.

@aves3348 5 ай бұрын

Just a quick question. I just purchased an Epson ET-4850 and cannot locate the same printer preferences screen as you show in your video. I'm using windows 11. There is a different screen, however, many of the items such as selecting matte paper are not present. Any ideas?

@AngieHolden 5 ай бұрын

Try going directly to the Epson website and downloading the driver for your specific printer. You probably have the wrong one installed.

@star_rose_three Жыл бұрын

Can you do a video just dedicated on Frosted blanks or glass banks sublimations issues

@AngieHolden Жыл бұрын

Try this: kzfaq.info/get/bejne/h7qoq8SdrNfSaHU.html

@star_rose_three Жыл бұрын

@@AngieHolden Also do you have any other suppliers that might be items like the Julip cup that you can get in Canada?

@melanietannertaylor0401 Жыл бұрын

Great video on Sublimination Printer Ink. What about the markers ? Do u use the markers ? I bought my CRICUT MAKER 3 just for making Quilt Labels & cutting fabric. How many labels have I made - 1. I stink at trying to get the text right & puttng SVG files on the grid. Several (5?) YT videos out there for Quilt Labels with markers & only 1 has the way like I want to do it. Yes I'm frustrated !! Any help please ? 🙏

@AngieHolden Жыл бұрын

I have several videos on the markers but nothing specifically for making quilt labels.

@ufoquilter86 Жыл бұрын

Which Epson eco-tank model are you referring to where you have a ton of options?

@AngieHolden Жыл бұрын

All Epson EcoTanks have a wide variety of paper settings and you can use a variety of ICC profiles. So yes you have a ton of options but it makes the trial and error a bit more intense!

@charitagrant854 2 ай бұрын

Angie: Is there an icc profile for epson 2800 series?

@AngieHolden 2 ай бұрын

Look on the website for the people you bought your ink from first. If you can't find one, you can start trying other ICC profiles and see if they fix your issues.

@marietapia8666 7 ай бұрын

Please help tip 6 I can’t get that version on my laptop or iPad I went under Cricut design space a photoshop one and under printer settings please help me with this how do I get that screen

@AngieHolden 7 ай бұрын

Try going directly to the website for your printer and downloading the right drivers.

@lelapatterson3414 7 ай бұрын

Hi I have a random question. Did you make your shirt? If so what was your process for printing on black shirt? Thank you in advance!

@AngieHolden 7 ай бұрын

This shirt is actually patterned HTV. The HTV has an ombre look and I just cut my word.

@weirfamily2012 4 ай бұрын

How did you find those settings ? I don't get those options using ecotank on phone

@AngieHolden 4 ай бұрын

You won't find many options on a phone. You would need to use a computer.

@user-vn6hf4ub9k 9 ай бұрын

Hi Angie! I'm having problems. I have the Epson F570 and work with Design space, Canva, CF and Epson Edge Print. I'm a master at none. LOL I had signed up for your last camp. Would there be info there? Really new to files and programs.

@AngieHolden 9 ай бұрын

What are you having issues with? The F570 is fairly easy to use as a general rule.

@traceyhales560 Ай бұрын

Our felt air fresheners came out perfect , vibrancy was great, did 2 of them then next lot came out so faded???? Cannot figure it out?!

@AngieHolden Ай бұрын

Hmmm...maybe moisture? Try a pre press.

@suzanneniemeier9899 10 ай бұрын

My Epson was printing fine and then in the middle of printing it went lighter. I did the clean nozzle, ink levels look fine. Any suggestios on how to fix. What is the ICC profile? Would that help? TIA

@AngieHolden 10 ай бұрын

Did you print a nozzle check page?

@carminapena9329 11 ай бұрын

Great video; thanks for sharing. Not sure if I missed it but where can I find the sublimation color chart?

@AngieHolden 11 ай бұрын

Sorry that is only in my course.

@carminapena9329 11 ай бұрын

@@AngieHolden How do purchase the course?

@xx-ce9nq 2 ай бұрын

Hi, I bought a design from creative fabrica with high pixels such as 4000px and when I press on a mug it looks lighter and when I press on a coaster it looks better brighter why is that?

@AngieHolden 2 ай бұрын

My guess would be you may need to change your settings for various surfaces and lay down more or less ink.

@suecollins3333 Жыл бұрын

i have two Epson Printers. The 15000 and the 3850. THe 15000 black is not a dark black. How can I fix it? I don't have any expensive programs.

@AngieHolden Жыл бұрын

Have you tried color correction possibly? kzfaq.info/get/bejne/nttglZd_ttXWZok.html

@robertday5656 18 күн бұрын

Where do you get images with at least 300 dpi because I cant find any?

@AngieHolden 16 күн бұрын

Anyone that sells images for sublimation should have them at that resolution.

@bobbicassibo3814 3 ай бұрын

Why am I getting lines on all my dark colors when I print on sublimation printer

@AngieHolden 3 ай бұрын

Try this: kzfaq.info/get/bejne/bNp9q7qk1LWYl4E.html

@ibrahimamin7858 12 күн бұрын

I used matte setting and it came out well the rest of the papers i printed out were poor quality very small white dots why??

@AngieHolden 9 күн бұрын

Maybe try a head alignment? I am not sure.

@weirfamily2012 4 ай бұрын

The pics I get from canva are printing light on paper but not in canva

@AngieHolden 4 ай бұрын

Did you press them to see the results?

@weirfamily2012 4 ай бұрын

@@AngieHolden yes still was light and printer is brand new it was my first few prints on there and all were light

@Crazydoglady. 5 ай бұрын

My photos on my mugs are too dark.. i checked all these none of them are an issue.. My pictures are bright on my laptop. .do you have a video for this? Im wasting tons of mugs

@AngieHolden 5 ай бұрын

What printer do you have? What settings are you using? There are a lot of factors for getting this right.

@Crazydoglady. 5 ай бұрын

@@AngieHolden sawgrass 500.. I wonder if that's the problem 🤔. Is that a cheap printer?

@AngieHolden 5 ай бұрын

I woud play with their material settings. Are you use the mug setting? Try changing the color to vibrant or photo and see if that changes things.