10 Tools Under $20 to Level Up Your Shop

Рет қаралды 928,547

Жыл бұрын

These must have woodworking tools are all under $20! Pick up these cool tools to help you with your DIY & woodworking projects.
Links to tools below 🔽
Get a Mistakes Strike Back T-shirt: fixthisbuildthat.com/product/...
🎥 What to Watch Next:
12 Tools Under $20 Every Woodworker Needs - • 12 Tools Under $20 Eve...
8 tools Under $20 YOU Told Me to Buy - • 8 Tools Under $20 YOU ...
Mobile Wood Storage Cart - • This Easy Wood Rack Ch...
13 Shop Storage Tips - • 13 Easy Ways to Organi...
➤Plans from this video:
Modular Garage Cabinets bundle (Save 30%) - fixthisbuildthat.com/garageca...
Mobile Lumber Cart - fixthisbuildthat.com/mobilewo...
➤Tools/Supplies Used (Amazon affiliate links):
🟢 ISOtunes Bluetooth Hearing Protection - bit.ly/2Ru4Es8 (10% off code: FTBT)
Toughbuilt Scraper Utility Knife - amzn.to/3gPl6Tr
6-in-1 Painters Tool - amzn.to/3OY5Rnr
Glu-bot Glue Bottle - amzn.to/3UAvrAs
Magnetic Parts Tray - amzn.to/3gWrVCA
Kreg Panel Carrier - amzn.to/3VqbBsE
Flexible Sanding Pad - amzn.to/3P0eOg7
Hook & Loop Blocks (with better shape) - amzn.to/3H3d1oz
3M 6500 Respirator $20 - bit.ly/3m6500
3M P100 Dust Filter - amzn.to/3upEB7S
3M VOC Filter - amzn.to/3UHxv9T
Alternate VOC with covers - amzn.to/3B5YaWD
Enclosed Goggles - amzn.to/3ukCCBT
Goggles with Mask - amzn.to/3XRlAcc
Milescraft Fence Clamps - amzn.to/3uDBFVH
3M Foam Ear Plugs - amzn.to/3h2yyTI
Kreg Project Blocks - amzn.to/3VutJSn
Painter’s Pyramids - amzn.to/3gXzOHU
ILTMS Push Stick - bit.ly/3iABdEx
➤Join the Builders Club!!! bit.ly/2abkaSV
More content, early access, FREE plans, video credits
➤Support the FTBT Channel:
Buy FTBT Woodworking Plans: fixthisbuildthat.com/plans
Buy FTBT Merch: bit.ly/2YgiHnd
Links to My Tools & Gear: bit.ly/FTBT-tools
Subscribe: bit.ly/FTBT-youtube
➤Thank you to these partners for supporting my channel. Go check them out!
Kreg Tool: amzn.to/2FXZIGp
ISOtunes: bit.ly/2Ru4Es8 (10% off code: FTBT)
➤FOLLOW ME on Social Media:
Instagram - / fixthisbuildthat
Facebook - www. ibuildthat
Twitter - / fixthisbuildtht
Pinterest - / fixthisbuildtht
Music Licensed through Epidemic Sound - Get a FREE month: bit.ly/3qCwWiW

Пікірлер: 425

@Fixthisbuildthat Жыл бұрын

Check out more tools under $20: 12 Tools Under $20 Every Woodworker Needs - kzfaq.info/get/bejne/h6l0lKhelda8n40.html 8 tools Under $20 YOU Told Me to Buy - kzfaq.info/get/bejne/jspgfc2dt9zHXYk.html

@NoNORADon911 Жыл бұрын

Don't use those plywood handle clamps on cement board (Hardie board) it will snap them.

@SpicySteve-tz2so Жыл бұрын

Love the channel! Happy May the 4th sir!!! I am also a HUGE Star Wars fan.

@KiwiThunderStorm Жыл бұрын

Hey Brad. Make sure you keep your 3M organic vapour mask in a sealed container when you are not using it. As the cartridges contain activated charcoal which will continuously absorb vapours. Also when you can smell the chemicals or solvents etc when using the mask you need to change your filters. Love your content. Chris the Paint Shop Guy.

@joe_ferreira Жыл бұрын

Your wife should have a sleep study. I was diagnosed with sleep apnea and getting a CPAP really improved my sleep and my health overall. My wife ignored it for years also as I snored. She then noticed that I was actually stopping breathing in my sleep and that it would cause me to wake up for a moment to breathe and I would go back to sleep unknowingly. She recorded me with her phone and had me watch it so I would take it seriously. I am so glad I got help.

@Fixthisbuildthat Жыл бұрын

We've actually been talking about that recently. Sounds worthwhile

@sendmedics Жыл бұрын

I second that. I’m constantly tired no matter how much sleep I get and my wife has noticed me snoring more often as well as stop breathing at time throughout the night. Going to get a sleep study done soon.

@rootvalue Жыл бұрын

A CPAP will change your entire life for the better. The masks are so unobtrusive now, especially if you’re a nose breather because you don’t need a mouth mask. A convenient side effect of getting a CPAP was my decades long battle with ocular (aura) migraines. Literally overnight I stopped getting them. It’s been 2 years and I don’t think I was *actually* sleeping before that time.

@joe_ferreira Жыл бұрын

@@rootvalue I have a dream wear mask. It's great. It also makes it very obvious when you are dehydrated. The lines on your face are a result of being dehydrated. 😁

@GraemePayne1967Marine Жыл бұрын

I second this! I was diagnosed with Obstructive Sleep Apnea after my wife insisted that Something Must Be Done. So I have been using a CPAP for over 15 years. The cost is covered by most medical insurance - or in my case, my VA Disability medical benefits.

@jasonwood7340 Жыл бұрын

Hey so that 11in1 (or whatever the number was) with the hexes, I think the hex cutouts are for the disassembly of paint guns for cleaning after use. The tool I have that like has the right size to loosen the nozzle and other parts on the paint sprayer. Pretty handy so I don't have to go hunt for wrenches.

@naturaIIydifferent Жыл бұрын

The 8 in 1 or whatever they call it has those wrench cut outs for paint sprayer hoses. If you work with an airless sprayer, they're pretty handy. For everyone else, stick with the regular 5 in 1. The new ones at harbor freight are like 5 bucks.

@ejnemo1325 Жыл бұрын

I was about to type the same thing it’s probably only good for your paint sprayer

@andpeters1 Жыл бұрын

Saw you have a homemade 3/4“ stop block that you use with the fence clamps. If you're still skeptical of 123 Blocks: adding 1" to your cut is easier math than adding 3/4“, and the clamp holes are already there!

@Fixthisbuildthat Жыл бұрын

Brilliant!!!

@dylan-nguyen Жыл бұрын

Hey Brad, the 3M 60921 is the cartridge with organic vapors and the P100 particulate filter both in one 🙂

@Fixthisbuildthat Жыл бұрын

Ahhh, good to know. Link for those interested amzn.to/3F2sBhA

@yitboy11 Жыл бұрын

@@Fixthisbuildthat Fit is everything in respiratory protection. Technically, your beard negates the half face respirator from passing a fit test. You will still be exposed to fine particulate and vapor without a proper fitting mask. If facial hair is unavoidable, consider investing is a PAPR (Powered Air Purifying Respirator) system. You can get the same filter styles to fit these systems, the head tops can be used with facial hair, and they add a nice cool breeze while you work. 3M TR-600 is the way to go. The way you use the half face respirator is for sure better than nothing. Just figured you should know about the correct solution for your hazard exposure. I too am too vain to shave my beard, and the PAPR has been my saving grace.

@backwoods_productions4432 Жыл бұрын

Safety glasses are a must! I used to be a machinist, now i was wearing saftey glasses but a metal sliver somehow got under there and into my eye. I woke up that same night around 2am and felt like i had flash burn. By 8am that morning my eye swelled shut and felt like it was on fire. Everytime i moved my eyes the sliver was cutting the inside of my eyelid. Eye doc just used a magnetic needle to extract it. But took about a week to heal and any sort of light would immediately make me tear up. I was rocking sunglasses indoors and an eyepatch that whole week. Its was painful to even watch tv.

@jimbryant2157 Жыл бұрын

The best purchase I ever made for my shop is a pair of bifocal safety glasses. I struggled with over-sized goggle-types to wear over my eyeglasses (which often meant that I just skipped wearing the safety glasses at all...) - and then I found the bifocal version about 15 years ago at the Woodcraft store in Boise. Those safety glasses are now the very first thing I put one when I go into my shop!

@cobaltwoodcraft4365 Жыл бұрын

Wow. I didn't even know that was a thing! I don't need to wear corrective lenses, but sometimes the magnification would be really handy.

@Zenkai76 Жыл бұрын

that's good to know, great tip Jim, now I know what to put on my CHristmist list

@GraemePayne1967Marine Жыл бұрын

I wear prescription eyeglasses with polycarbonate lenses. In addition to being lighter, the PC lenses are VERY impact resistant - but they are NOT ANSI rated. For that reason I also wear ANSI rated goggles over them, and/or my Trend Airshield Pro (which also protects my asthmatic lungs.) Years ago I used to have conventional safety glasses, but my prescription made them both heavy and expensive. (Fortunately, they were paid for by employers in my pre-retirement careers.)

@fortpatches Жыл бұрын

@@GraemePayne1967Marine FYI, you can get ANSI Z87.1 prescription safety glasses for ~$35 at Zenni Optical!

@HyperionBadger Жыл бұрын

Have you ever considered a face shield? I find myself always reaching for mine when I finally bought one.

@trevorgreene5059 11 ай бұрын

Your tip at the 5:16 mark reminds me of another trick I used. I have a bigger magnetic tray and I spilled some nails (I think it was), and since I don't have a magnetic sweeper, what did I do? I slapped the magnetic tray to the underside of my hand truck and used that as a quick-and-dirty magnetic sweep. Worked like a charm.

@ScytheNoire 4 ай бұрын

I made shocked Pikachu face when I saw that Kreg Panel Carrier. That was amazing. I need that.

@docferringer Жыл бұрын

For anyone interested in those magnetic parts trays, shop around online and you will find a variety of sizes and shapes to go with whatever projects you do the most. There are small rectangular ones the size of that tray of screws you dropped on the floor. I find it useful to pre-load those small trays with common fasteners so they are within arms reach, and you can even turn them on their side and have them stuck to a magnetic backsplash over your work area. Doesn't take up as much space as a bunch of plastic trays and there is no risk of knocking them off the bench (and even if you did the fasteners would stay in the tray).

@bjb7587 Жыл бұрын

I keep my two on the side of my drill press next to my bench. Use them often. Like that paper towel idea.

@yossiyaari3760 Жыл бұрын

Regrading the 3M filter mask, I recently realized there are different models with different sizes. Since switching to the right size (M->L) it seals better, and is much more comfortable. And I use it much more.

@epiccollision Жыл бұрын

For glue I also really like FIFO bottles with silicone dispenser nibs, they’re usually 6 for 10$ and they have so many household uses for thick liquids.

@paulhopkins1905 Жыл бұрын

The wrench on that 2nd tool is for removing the tip on a spray gun. It's actually pretty handy

@OmegaPaladin144 Жыл бұрын

Safety dude here. For the respirator, make sure to shave and get a good seal. Like another commenter said, keep the cartridges in a bag. I really like 3M respirators because they have a design that routes air awayu from your glasses. On the goggle, the enclosed style will also keep chemical splashes out of your eyes. On the ear protection, ear plugs are cheaper and more effective, but you need to get a proper fit. It should sound like you are underwater or holding a shell against your ears. See if you can get a sample pack from the company.

@gigaphonicon Жыл бұрын

5 and 6 in 1 paint tools are a life saver when working over night maintenance in retail

@mikenco Жыл бұрын

I have that exact magnet bowl. I use mine a LOT.

@alanbrandt999 Жыл бұрын

Great tips! I bought the glue dispenser and painter's triangles before the video was even over. I stain 2 sides of wood a lot and the triangles are a better way than how I've been doing it. I bought the Kreg plywood/drywall carrier about a month ago and wish I would have had something like this decades ago. I carried 22 sheets of 1/2" drywall out of a trailer and up flights of stairs onto my second floor, by myself, in about a half hour. Without the Kreg tool I would never have been able to get them upstairs alone.

@weepingwillow1993 11 ай бұрын

The magnetic parts trays work fantastic for pins too. I have been using one next to my sewing machine for years now.

@blackdog850 Жыл бұрын

Top-notch episode! I found myself taking notes, there was so much good material here! Well done!

@cpowerdesign 6 ай бұрын

The Kreg panel carrier is worth the money. I bought one a few months ago. Not only has it saved my back, but it makes bringing sheets in and out of my shed easy. It even helps when putting sheets on saw horses.

@mattatkinson5187 10 ай бұрын

I have several of those magnetic parts trays, but never thought about that trick with the paper towel. That's brilliant!

@flambokuma2299 Жыл бұрын

My Dad was a Night Custodian at one of the local High Schools back in the 90's. He kept a 5-1 Painters Knife in a holster on his hip. I have it now and use it regularly at work too. Someday it will go to my Son.

@FriedBob Жыл бұрын

I have one of the sheet carriers that is more basic, but was designed for drywall. Would work for plywood too.

@irishrebel7616 Жыл бұрын

I’ve had that knife for a couple of years now and I love it! I use it all the time.

@georgeeads8689 Жыл бұрын

I really liked the utility knife/scraper. I agree about the 6 in 1 painter's putty knife. I use mine all the time.

@Golden_God_Untethered Жыл бұрын

There's a paint can opener on the end of the Tough Built Scraper and it has a lanyard hole. I own one and it's awesome.

@BrettDalton Жыл бұрын

The enclosed safety goggles are also great if you wear glasses, the DeWalt ones (look like the pair you had there) and some other brands have enough clearance to wear normal glasses underneath comfortably

@GeometryBuild Жыл бұрын

Thanks! Got sanding pads! Especially love that flexible one. Live edge sanding coming soon :)

@woodraptordesigns Жыл бұрын

Thanks I have had a glubot for over a year now and never knew about the cap being storage for the tip cap. that was the only thing a hated about the glubot was the tip cap always hanging in the way. Great job.

@craigrmay7935 Жыл бұрын

The panel carrier looks to be a lifesaver; never heard of or seen such, thanks 4 sharing!

@MrGrant440 Жыл бұрын

Great Video. My favorite part of those 3m masks is when you are wearing glasses the air goes out the port on the nose, so your glasses don’t fog over. Complete game changer.

@Fixthisbuildthat Жыл бұрын

Oh yeah, that's an excellent feature

@norastackhouse Жыл бұрын

Hi South Texas here! Thank you so much for making awesome content for us! I really enjoy your videos. Honestly, I would watch you over any streaming service. Great job!! Also, I appreciate you explaining the respirator and eye protection. I haven't used my mask yet but I have the pink filters. I didn't know about the other filters.

@am2dan Жыл бұрын

I've been needing some of those things. Thanks for the links.

@DudeSawdust Жыл бұрын

Always fun times in the FTBT shop. Great video 🎉

@Fixthisbuildthat Жыл бұрын

Glad you enjoyed it!

@patc5577 Жыл бұрын

Love that box cutter/scraper!! It’s larger in size, so for me with arthritis in my hands, it will be easier to use. And I could actually use the scraper part.

@Fixthisbuildthat Жыл бұрын

Yeah, it's got a nice size to it 👍

@bruceanderson5711 Жыл бұрын

As a bonus feature, the opposite end of the cutter/scraper can be used to open paint cans.

@joshuapitts9437 Жыл бұрын

It uses proprietary blades though that are hard to find.

@scottmccain113 Жыл бұрын

Yes having to buy their blades sucks. They are expensive and wear quickly when scraping. It was a big letdown because the knife is awesome.

@robohippy Жыл бұрын

The 6 in 1 painter's tool, to me, is a must have tool for every shop. Never knew what the curved part was for. As for the magnet tray, I keep a couple of the Mag Switches floating around the shop. The advantage they have over the magnetic tray is they have an off/on switch. So, pick up the screws, bring them over the container, turn the mag switch off and they fall into the container. I also use them when fishing for a screw or nut that has fallen into the saw dust/shavings piles. Big piles from the wood lathes.... Also, I love the router/sanding matts for the shop. Get mine from Woodcraft, but sure there are others. They provide padding for your fine pieces of wood, and also fairly non slip. I have them in the drawer where I keep my bench chisels. They are also great for under your sharpening stones, both for the kitchen and the shop, and under the cutting boards in your kitchen.

@phatcatmat Жыл бұрын

Curved part helps clean paint off of your roller. Give it a try!

@sgaeagles2009 Жыл бұрын

Another idea for the magnetic tray…put the plastic container of wood screws in the tray so that if it does fall off the bench it stays in place

@Fixthisbuildthat Жыл бұрын

Clever

@jmorv8866 Жыл бұрын

Dude, what a great video! My Christmas wish list just got bigger (the wife especially liked the last one, since she's the master stainer of the family). Thanks again!

@Askfornate Жыл бұрын

Bought the scrapper knife the next day after watching this. Will be amazing in the car business for 2023!

@pieteri.duplessis Жыл бұрын

Nice presentation. Your video not only fed my curiosity but was also entertaining, pity these useful items were not available a few year back; it must be nice to use.

@davidhalper6447 Жыл бұрын

So as a painter, the ass end of the tool I use to fix wall after i take a nail or screw out a wall before i fill hole. My foot is the " hammer" you speak of. The scraping fat end can also take out outlet screws.

@thatautogarage3644 Жыл бұрын

The 5 in one is the best! I sharpened every edge of mine so it’s now a 5 in 1 painters knife!!

@blazegbs Жыл бұрын

While I generally like Kreg tools & have a number of them, I don’t like their prices on some items. Instead of paying for the Project Blocks & Painter Pyramids, I just purchased a bag of 12 hockey pucks, rounded of some 1/4-20 bolts to points for $19.99 on Amazon. $1.67/each plus the price of the bolt.

@tygrahof9268 Жыл бұрын

I have a few of these. Nice list. The panel carrier is on my New Tool list...That never ends...

@libertycosworth8675 Жыл бұрын

Really useful video. One thing about the respirators - for them to work properly the wearer needs to be clean shaven (I have a beard too, but I have had to shave it off to wear a respirator while working with hazardous materials). Facial hair disrupts the facepiece seal almost completely negating most of the utility of wearing the respirator with organic vapor cartridges and/or particulate cartridges. There is a reason why workers occupationally exposed to hazardous materials and required to wear respiratory protection based on air sampling are required to be clean shaven to ensure they pass what is called the fit test and also to ensure the best possible facepiece seal.

@Mrcloc Жыл бұрын

6:08 - that is REALLY useful! I often can't quite reach the edges of the board, so I have to either use my might of Thor to lift the board like this with my bare hands, or do the lever-lift from one end. And plywood boards are heavy!

@lavaweb1 Жыл бұрын

The force was strong with this one! Great vid!

@Fixthisbuildthat Жыл бұрын

Good, it was

@brettwilson4397 Жыл бұрын

Great Video! Thank you for sharing your plans. Great ideas!

@hersheyskwertz9315 Жыл бұрын

Absolutely love that painters tool

@dporrasxtremeLS3 Жыл бұрын

Tool Time!!! Tool Time! Outstanding tool review! New tools to make your work better, faster and more satisfying. Thanks!

@MikeyBCook Жыл бұрын

Gotta try out the Purdy folding scraper, great and easy to fit in any pocket.

@elliothickle3247 Жыл бұрын

If you liked the Pentel graphgear 1000 the rOtring 800 retractable mechanical pencil is on another level! It's the best feeling pencil with a nice solid metal weight to it. It's also great for fidgeting with the coolest opening mechanism ever thanks to German engineering.

@sdahlstrom144 Жыл бұрын

That scraper thingy works great. Right up until you drop it.

@stuartkorte1642 Жыл бұрын

Nice list. Wish the blade on utility knife did a 180. I have a magnet in a baggie but the tip with paper towel and parts bowl is a good one.

@Lennartz1 2 ай бұрын

Excellent video!

@GhostShipMusic Жыл бұрын

Great video man. I'm about to buy ALL of these.

@scottpeters1847 Жыл бұрын

The magnetic tray has a better use if you need a place to hold nuts, bolts, screws etc. But have no flat surface like working inside a duct or metal area, you can just stick it to the side of the metal and hold nuts and bolts while you work

@wordwyrd Жыл бұрын

I think you have those reversed.. 2097 folters are absolutely rated for organic vapors. They were a mainstay in the injection molding shop I worked in for a decade.

@MountainMenace420 Жыл бұрын

Love these videos! So much useful information

@Fixthisbuildthat Жыл бұрын

You're welcome!

@georgestgeorge5110 Жыл бұрын

The gluebot also has a babybot version. Super handy for small projects.

@Twin_Flyer Жыл бұрын

I use the Babybot for building model airplanes, it works great.

@itsROMPERS... Жыл бұрын

I love the way the hook and loop sanding pads help you use the most expensive sanding pads all the time, instead of economizing on cheap sheets.

@macforme Жыл бұрын

NO, YOU ARE!!! : I agree BUT: One must pay for convenience.

@itsROMPERS... Жыл бұрын

@@macforme yes but it's really just as easy and effective to simply use sheet paper on a block.

@macforme Жыл бұрын

@@itsROMPERS... I know .....but, I just wanted to write your out like that....

@itsROMPERS... Жыл бұрын

@@macforme sorry?

@macforme Жыл бұрын

@@itsROMPERS... don't be sorry... It's me...not you. I have fun with everything even with people's handles.

@tonythomas951 Жыл бұрын

Whats that? Ive had one of those for a long time and I love it. Using it today to carry sheet rock and plywood.

@thomrose9119 Жыл бұрын

This is D.&T. TOXIC RC, IVE BEEN BUILDING SINCE 9 YRS OLD LICENCED AND CANT SAY HOW LONG LOL, VERY NICE TO HAVE HEADS UP FOR THINGS THAT CAN BE PRACTICAL AND EFFICIENT, THANKS

@Ratheon1075 Жыл бұрын

The 15 in 1 putty knife has the hex wrenches for breaking down a spray gun. One size fits the tip and the other where the paint cup attaches. Useful if you are someone who sprays allot and don't want to carry the extra tools.

@sethdistler5332 Жыл бұрын

Great comment thanks!

@jarredmattingly5369 Жыл бұрын

Awesome! Thanks KnightHawk!

@tripstomexico9770 Жыл бұрын

“Do the Heinz 57” got me😂😂😂😂😂

@bravo_the_broken4003 Жыл бұрын

I like the trick with magnetic tray, I actually have a magnetic broom thing that's made by anvil. My mom found it somewhere and brought it to me of course, it came in clutch when my father dropped 2 trays of watch band parts

@bryanharness1122 Жыл бұрын

Harbor freight sells a rolling floor magnet that's really nice for picking up screws u drop or anything metal

@garynagle3093 Жыл бұрын

Love the products. Great video

@BlackBob99 Жыл бұрын

This might make it under your $20 limit (depending on the exchange rate), but it is always in my pocket. My father had a brass one, but Lee Valley came out with a steel one. Lee valley marking multi tool

@sillysausage72 Жыл бұрын

Great tools! Thanks brother! Have a great weekend. Cool shirt btw!

@Fixthisbuildthat Жыл бұрын

thanks!

@chadshardwood247 Жыл бұрын

on the 15 in one the side wrench slots are for paint guns for the tips and should be the same as your air fittings

@SkipFixesStuffAndKnowsThings Жыл бұрын

Those Kreg pucks are awesome. I have dozens of the triangular/pyramid painters blocks as well as a number of the sanding pucks, but the painters blocks are frustrating as they tend to slide around or even flip when any pressure at all is applied. Since these have a wide base and are rubberized, they will be stable and not move. This looks like an awesome product! And the painters blocks can still be used after finishing both side as drying racks so those don’t become redundant. Thanks for this tip!

@williefranklin7865 Жыл бұрын

I have the 1st razor knife/ scraper. It is good for glass. However for me, it is not good for scraping/ removing caulk as the handle is too thick and hits the tile keeping the blade at too much of an angle.

@watermain48 Жыл бұрын

Thanks Brad.

@TheTsunamijuan Жыл бұрын

The hexes and screw drivers on the 15 in one, fit the most common sizes on airless paint sprayers. So If your working with a paint sprayer constantly. It frees up a good deal of space in the pocket.

@MrNutch Жыл бұрын

Great video! Watched a similar video not to long ago but with tools under $50, would be interessting to see what your recommendations in different price ranges are.

@Fixthisbuildthat Жыл бұрын

Yeah, we're thinking of that for a future one 👍

@nickbrutanna9973 Жыл бұрын

FWIW, Harbor Freight has a HUUUUGE set of different mag parts trays, different sizes, shapes, colors, all at pretty good prices. And this is the kind of thing that really can't be done wrong, so, yeah, HF is one of the better ways to go with these. Regarding face protection, even better is Amazon: UVEX by Honeywell Bionic Face Shield with Clear Polycarbonate Visor (S8500) Just a hair over US$21 as I write. They allow people who wear reading/closeup glasses to use them comfortably. This also flips up out of the way if you need it, and is usually far enough away from your exhalation that it does not fog up overmuch. P.S. another thing of some relevance is bifocal safety glasses, which provide some assistance with seeing limitations for those of us with less than perfect eyesight. Not sure about wearing with any kind of respiration mask, however. There seems to be a limitation there, in that there are not many things that allow both or provide both...

@christopherfisher5546 Жыл бұрын

Also, there are times when Harbor Freight offers those magnetic trays for FREE with any purchase. That's how I got mine.

@zoysiaguy3757 Жыл бұрын

I wish I saw that magnet towel hack yesterday lol now I'll remember that for next time.

@TheNewJankyWorkshop Жыл бұрын

Ok, that scraper blade is pretty awesome.

@TheRealDailyAnarchy Жыл бұрын

Brad how weirdly satisfying is it with the scraper/utility? You just wanna set and play with it? It's like a grown up fidget spinner. Lol

@hassanal-mosawi4235 Жыл бұрын

Thanks for sharing that!

@Fixthisbuildthat Жыл бұрын

👍

@tylerheiney434 Жыл бұрын

I found a six in one with a set of quarter inch bits that go in the end so it works like a normal screw driver

@Naademai Жыл бұрын

Would love to see a video comparing tools from a beginners standpoint, sort of a guide for what power tools are best to buy first for various types of work if you don’t have any big tools to start like if you want to make furniture get this if you want to make small things get this if you plan to work with a lot of plywood or if you plan to work more in 2x4s get this

@bryce8174 Жыл бұрын

Project Farm youtube channel is great for knowing what tools are worth the money

@Naademai Жыл бұрын

@@bryce8174 thanks for the recommendation

@edmundssondors3738 Жыл бұрын

Basically, any tool will do the job! None of these tools are necessary. Just use your head, and you will accomplish anything!

@rob379lqz Жыл бұрын

Very good! Thanks.

@alexlew5039 Жыл бұрын

The Husky 5-1 painters tool is my go to glad to see it in your video:)

@alonzohollingsworth7712 Жыл бұрын

Great video, loved it.

@quirkygreece 7 ай бұрын

Great tip for picking up dropped screws . . . not that I ever drop screws . . . not me . . . never . . . ever . . . cheers!

@flyty2134 Жыл бұрын

I like your videos informative, and funny God bless you and yours thanks .

@johnhicks3797 5 ай бұрын

You need to check out the Purdy 10 in one folding paint scraper, another really nice folding tool is the Kobalt chisel with the folding handle I recently got a double sided folding pull saw from Temu and the handles fold together all three excellent ideas for a tool bag. I like the Craig marking tool you did in another video might be my next purchase. All these items are under 20$ as well.

@grom7826 Жыл бұрын

My uncle used the handle to drive sheetrock nails in. Old painters never die, they just flake off !

@akshobiya7501 Жыл бұрын

I couldn't purchase the 6" 3M Flexible sanding disk on Amazon fast enough, thanks for that!

@77cemoore Жыл бұрын

I bought two packs of the Kreg pucks at home depot this morning for $15 each. Been wanting these for a while but kept forgetting to get them.

@JeremiahLutherPritchett Жыл бұрын

Thanks for sharing. Not enough solid Losi Mini B builds upgrades etc. on KZfaq as of yet.

@tejasgihwala1313 Жыл бұрын

Cool tools and channel. I wish we had a few of these in South Africa 🇿🇦

@Fixthisbuildthat Жыл бұрын

👍👍

@gabrielrooks9222 Жыл бұрын

Those are some great ideas for tools under $20.

@wayneyadams Жыл бұрын

5:20 Try this. Turn your magnetic bowl over and set you plastic tray on top so the magnet pulls whatever is inside locking down your container so it does not fall on the floor.

@kegomania 9 ай бұрын

For anyone who's batteries wo t charge, apply the required battery voltage to the battery, + to + and - to -. The problem is often a cell balance issue but when you force voltage in it allows the components that monitor cell balance to balance all the cells on the charger. I fixed my RC batteries and my milwaukee batteries like that.