100 Year Old Barn Door Rollers Taken Over by Rust

Рет қаралды 23,628

2 ай бұрын

100 year old barn door rollers restored. rollers completely seized and packed with rust
If you have something you would like me to restore send me an email at business@lostandrestored.com
Watch Next:
I Restore America's First Knife Bayonet (US Krag)
• America's First Knife....
Rusty Swiss Army Knife Left To Rot...Knife Restoration!
• Rusty Swiss Army Knife...
Rusted Micrometer, Will It Ever Work Again?
• Rusted Micrometer, Wil...
Rusted Pocket Knife Disaster! Major Restoration Project
• Rusted Pocket Knife Di...
Rusty 100 Year Old Electric Fencer Transformation!
• Rusty 100 Year Old Ele...
Broken Rusty HawkBill Railroad Wrench 150 Years Old!
• Broken Rusty HawkBill ...
The Most Broken 1800's Apple Peeler Restoration...Too Old To Fix?
• The Most Broken 1800's...
Products I use:
Get 10% off with any Fertan products with the link below:
www.fertanusa.com/discount/LR10
Get Your Laser Engraver: s.zbanx.com/r/rLCteMA1UIaJ
Use Promo Code：ZX50
Make sure to Subscribe and hit that Bell Notification to see the next Lost & Restored video!
Subscribe: / @lostandrestored
I love restoring vintage odds and ends. What antique do you want to see Restored?
#lostandrestored

Пікірлер: 32

@gaffyh1745 2 ай бұрын

Didn't feel like a happy restoration! Looks like it fought you all the way and you glad to see the back of it.

@lawrenceforman6999 2 ай бұрын

This guy is work very hard to restore the “Door Rollers”. I’m sure he worked this tool stuff in 2 to 3 weeks. (It’s my opinion) It’s hardest work with project that I’ve been watched KZfaq shows! He’s best toolmaker! Hope Myers from Ashland, Ohio is so appreciative with this guy! Great job 😊

@OhHel65 2 ай бұрын

Jeez, is this thing worth all the effort?

@RestorationVideo 2 ай бұрын

*_Never thought anyone could recover. The most incredible work of the best_*

@clifbradley 2 ай бұрын

You went all out on these.,way to go. I do some slight restoring, nothing anywhere near approaching your level. Always educational for me to watch your videos and learn, plus it gives me confidence in my next project 'tomorrow something bigger' type mentality. I wish I knew someone that did this around me in Florida but alas I don't know anyone. There was a bladesmith I knew that would help me restore some tools and such, but he got dementia and had to go to a nursing home. I did an old Ferrari tool set for a customer that came out really well. Didn't take a ton of work, just scraping, soaking, sanding and repainting. Paid me a couple hundred dollars. Everything I used in that project I learned from you

@yuttapongmahingsapanchu-2575 2 ай бұрын

Good job

@mskayla7747 2 ай бұрын

You pulled out every trick in the book and then added a few of your own for this one. I knew you'd get it done because you posted a video, but it looked like it took forever. 👍

@Austeration 2 ай бұрын

*Some beautiful repair work there, that would have been such a rewarding challenge bringing these back. Love your work 👍*

@WowTalent-sk3eg 2 ай бұрын

Amazing Restore

@jeffreyandreas7514 2 ай бұрын

Wow, that was a lot of work! Very nice job making them useful again!

@1954JDR 2 ай бұрын

Wow! Great job. I'll bet they will hold up a barn door now.👍👍

@galinapatey9371 2 ай бұрын

Класс!!!👍👍👍

@MASI_forging 2 ай бұрын

Beautiful restoration 😍😍

@vinceianni4026 2 ай бұрын

Good job mister beautifully restored well done

@georgepretnick4460 2 ай бұрын

Unless this trolley is going to be just a wall hanger, I'd have ground the burrs off your home made pin bearings.

@jmg-sw5xr 2 ай бұрын

I would have hardened the pins and roller bearing pins...but should be fine if not used on barn doors again ;)

@clifbradley 2 ай бұрын

Threw me off by uploading a day early. I love the Saturday uploads. Reminds me of when I was a kid and had the Saturday morning cartoons, except I GET MY FAVORITE KZfaq channels. I have you, Yachts for Sale, Legit Streetcars, Nautistyles and then Yachtbuyer. Simple pleasures. Great entertainment

@rjb6327 2 ай бұрын

I would soak them in a tub of water first. I would use lock washers when assembling the pulleys.

@Phil197 2 ай бұрын

Great video this is more my kind of stuff to restore Love it

@tomswindler64 2 ай бұрын

Like you said,would make a Art Deco piece to hold items on the wall.great video as always.just keep doing what you do.😎😎😎👍👍👍

@user-kh2ff6kk3o 2 ай бұрын

so good video

@davidjohnston330 2 ай бұрын

Hard work! 👌

@robertbeer2584 2 ай бұрын

good job buddy, that was a challanging one for sure

@user-kn9wx7uh7f 2 ай бұрын

ビックリ！

@arnoldluz05 2 ай бұрын

The dust removal solution looks like coke

@dandickinson1003 2 ай бұрын

Dirty parts!

@Jdrf73 2 ай бұрын

Soak that stuff in mtw rust will come right off or dr pepper

@rogerpatrongonzalez5800 2 ай бұрын

👍👏👍👏👍👏👍👏👍👏👍👏👍👏👍🥃🥃🥃

@Olexandr_UA_ 2 ай бұрын

И шо это за краказябра?

@kendion4597 Ай бұрын

Wow fake rust. Im the only person who noticed. Ive restored rusty tools. This item was battered and dipped into a sand bath. Its crazy. I see alit of these. Why??? There are so many old rusty items. Why fake it??? Maybe im wrong. I jist watched 2 fakes for sure.