1000cc Trophy Truck Go Kart First Rip! 100HP Mini Trophy Truck Build

Рет қаралды 465,117

3 жыл бұрын

Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
We're finally able to give our homemade mini trophy truck a thrash in the backyard! In today's episode, we cut and mount pedals, reinforce the suspension, and get the engine running properly. This vehicle has a LOT of power- it spins the tires at 2,000 RPM in 3rd gear! We might have a traction issue on our hands.
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
Go Power Sports: bit.ly/3QKyODE
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 1 000

@CarsandCameras 3 жыл бұрын

So awesome to finally be able to DRIVE this machine after working on it for months

@Vasyahumor 3 жыл бұрын

kzfaq.info/get/bejne/asBgqchlmqnPkYE.html

@IllegallyAcquiredKIA 3 жыл бұрын

Needs more lift and softer suspension if you want it to be like an actual trophy truck.

@santiagoracingco.3988 3 жыл бұрын

It honestly looks and sounds like a old vw buggy

@seanmayo206 3 жыл бұрын

U guys do a hell of a job at this stuff. Good job. I'm watching from Washington NC. Go pirates

@Arachnos27 3 жыл бұрын

I’m out in Oregon and y’all inspired me to get some projects rolling. Started a minibike from scratch and I’m fighting electrical on an old Murray currently to get that going. Projects take time but they’re fun to work on. Love the vids I learn a lot.

@goatslayerwp 3 жыл бұрын

That roll cage needs some reinforcement. On a hard roll, that thing will be a neck snapper.

@1one3_Racing 3 жыл бұрын

At least those half inch thick pedals will survive the crash

@craigengelman4534 3 жыл бұрын

@The Truth of the Matter i build race cars and im a nascar tech inspector . those welds all suck and some sucker is gonna get hurt with there junk !

@craigengelman4534 3 жыл бұрын

@The Truth of the Matter haze

@robertbelote5273 3 жыл бұрын

Look guys, im a dishwasher and i have a gerber multitool, I think itll be fine.

@carsongeye1462 3 жыл бұрын

Love that they spend so much time on the pedals being pretty, but have so many fundamental issues with design and construction.

@bandit911 3 жыл бұрын

It'll be fine 👍🏽

@FixItStig 3 жыл бұрын

They probably want to use their table more than to have pretty petals

@ronnie8099 3 жыл бұрын

lol yeaaa

@ModerateDev 3 жыл бұрын

for example sitting on a plastic seat 3 inches from the drive shaft with nothing between.

@benny5789 3 жыл бұрын

@@ModerateDev it’ll be fine! That’s the Gambler spirit! Safety third!

@worldcrap12 3 жыл бұрын

Isaac trying to figure out no spark is like Clark Griswold trying to figure out his Christmas lights!

@jakeniewold3094 3 жыл бұрын

And this guy(Ike) worked at a automotive shop¿ sometimes the channel is painful to watch. Those 2 guys need to get back to basic automotive 101 geeze

@tstricklin4808 3 жыл бұрын

😂

@TheBigjrbbbr 3 жыл бұрын

Nailed that!

@1one3_Racing 3 жыл бұрын

@@jakeniewold3094 maybe they could also watch some KZfaq tutorials on frame design and tube bending? I mean, this is a bathtub that drives....

@craigengelman4534 3 жыл бұрын

@The Weapon Collection ive built 100s and was a nascar tech inspector . these guys just suck i watch just to laugh at them . just because the got subs dont mean shit .

@transplantedhillbilly6549 3 жыл бұрын

The reason you need to down shift pushing forward on the shifter is because, in an emergency stop situation, you don't want to upshift when you lean forward because of breaking hard. Pull back to upshift. Push forward to downshift.

@tep1003 3 жыл бұрын

It isn't really an issue because in an emergency stop situation, you're either going to stall it or push in the clutch. You aren't downshifting in an emergency stop because your goal is to get it stopped as soon as possible.

@snaxgalore5764 3 жыл бұрын

@The Truth of the Matter not stupid whatsoever, the emergency thing doesn’t really make sense but yes down to shift up makes wayy more sense

@why3011 3 жыл бұрын

@The Truth of the Matter it's correct, silly billy.

@jacobsomsky412 3 жыл бұрын

Sounds a bit like a old vw sandrail. Love it!

@MOE13576 3 жыл бұрын

I got one of those

@gilbertosantana4524 3 жыл бұрын

@@MOE13576 me too mines and old 70s high jumper

@MOE13576 3 жыл бұрын

@That2jzSupra I wish hahaha....all i did was put a new clutch, pressure plate rebuild engine, paint it ect.

@MOE13576 3 жыл бұрын

@@gilbertosantana4524 that's cool..I don't know what kind of frame I got.. might be similar...

@zuestoots5176 3 жыл бұрын

@@MOE13576 i have a fugitive 2 seat rail with a 2186cc VW. It makes around 160hp NA. Easy pulls the fronts on command.

@danw1955 3 жыл бұрын

Good to see you got the dropped cylinders issue fixed. Just for safety, you should pull that ignition module off the kart anytime you weld on it. Electronics don't like to be exposed to all that induction created by welding current. If it were me, I'd work on getting that shifter *inside* the cage with a *lot shorter* throw, and reverse the shift pattern so you pull back to go *up* through the gears as it is natural for you body weight to shift to the rear when accelerating. Maybe go with a shift *cable* as well, to reduce the amount of linkage involved. You definitely need to get a different differential in there,without that stupid extension, and maybe a flat chain driven gearbox to get the power more toward the center just behind the engine. With as much crashing around as you guys will be doing, you want your driveshaft straight to take the suspension travel without overstressing the U-joints. Good luck on it.. seems to be coming together nicely!😉

@scoots6251 3 жыл бұрын

As an old JD tractor owner, and a beemer 1000 cc owner, I remember that when you lost the coolant or changed it, you had to be sure that the water pump was flooded before you ran the engine. You see vehicle water pumps do not "suck" air and as such, they will not void themselves of air to get water in, JD had bungees with bolts and seals to allow coolant to drain out showing that you had water up to that point and continued the flow until the entire engine, coolant lines and pump was flooded. If you do not do this you are looking at at least a blown head gasket, warped heads, or much worse, such a shame for such a spectacular accomplishment, Kudos to the team!!! You guys rock!!!

@575conbon 3 жыл бұрын

"now I need a computer friendly test light" *next scene is them welding on the buggy frame

@jman6030 3 жыл бұрын

Was just thinking that lol

@williamstamper442 3 жыл бұрын

But how do you know for sure if they didnt drop the ground connection while welding? Im neutral here and not putting down your comment.

@williamstamper442 3 жыл бұрын

Ok my bad guys i had not watched all the way thru to see that 12v was not disconnected. Not sure this has anything to do with "problem" however because its only that coil and not the other affected. If possible to swap the supply 12vdc and see if problem "follows" or goes away.. In other words this may be an ECM driver issue. Admittedly i am rusty at electrical diagnosis as ive not worked since dec 2017 and on disability soc sec as of 2019 at 51 years old. Worked 20+ years as an electric forklift mechanic and have seen and repaired many a things over the years. Point i wanna make is i appreciate you younger fellers into the diagnosis of automotive/equipment electrical systems and repair. The more time you put in the better you get and in no time y'all will be fixing stuff many others cant. Now that i dont wrench daily all i can really do is watch people on youtube playin around. As a measure of advice never get caught up in the what brand or name is on the valve cover when it comes to repair of anything...electricity knows no brand. Ok ive rambled too long with this, hope y'all dont "ok boomer" me in that im not That old😉👍

@mattiescreations 3 жыл бұрын

@@williamstamper442 if he switches pulse input leads and then cylinders swapped diagnosis then it’s that cdi box

@backcountryme 3 жыл бұрын

Guys, I love your builds and enthusiasm. But PLEASE change the cage design in this before you get hurt. Look at the cage design of a Sprint Car, and do something like that. Move those bars that are above your head to the sides of the roll cage. Then brace it some like a sprint car. The way you have it now makes the outside of your cage very weak, and it is also a spot where you can hit your head if you flip it. You really need to fix this guys. This is coming from a guy that has driven Midgets and other race cars. Please, I don't wanna see either of you get hurt. It would be an easy fix if you do it now.

@StupidEarthlings 3 жыл бұрын

Easy fella, they aren't driving in the highway. (Gonna handle so as they wont top 40).. just sayin. They REALLY dont need to be to 'CODE'. I just give it for fun.

@ryan14r95 3 жыл бұрын

StupidEarthlings they will probably top speed it on the road and if it flips it’ll be done

@backcountryme 3 жыл бұрын

@@StupidEarthlings nothing “code” about it. The way they have the cage built it will most likely collapse on them if they ever get it upside down. Just trying to pass on my many years of experience racing and building cars to try and help make their project a little safer. If I was worried about any kind of code type thing I would be on them for not using 4130 tubing.

@bonzogamer6966 3 жыл бұрын

NASCAR asked Ike & John to build Next Gen?

@manueltovar4821 3 жыл бұрын

You are very right about the cage being a very poor design and to the ignorant fool that said it don't have to be to code wen your in the middle of F N roll over your going to wish it was up to code and it doesn't matter if your on the road or off road cars can roll over just about anywhere not just on the street

@tylerjones4768 3 жыл бұрын

Should never be welding on anything with a computer and the battery hooked up or not having a surge protector on it. Can't wait to see this thing ripping!

@reidmorin7984 3 жыл бұрын

They will figure it out real quick when they short a computer

@paintham9430 3 жыл бұрын

It’ll be fine

@MarkyMark1986 3 жыл бұрын

Been welding on vehicles since 2007 never unhooked a battery before. I’ve always been told to unhook them but it’s never been a issue so I don’t unhook them

@richb.4374 3 жыл бұрын

@@MarkyMark1986 You've been lucky. One bad ground on your welder can fry the engine ecu or the alternator. I've seen it happen before.

@aeroflopper 3 жыл бұрын

Why would you do the shifter the opposite way to the rest of the world, there is a reason we pull gears and push forward for down shift

@daviddonaghy6494 3 жыл бұрын

Because that’s the way it could be run using a motorcycle transmission.

@nielsdebakker3283 3 жыл бұрын

@@daviddonaghy6494 simply place the pivot point in a different spot, it's that easy to reverse the pattern to car sequential pattern(except for first).

@captainnapalm8207 3 жыл бұрын

I had a 2000 BMW 540I auto, and that's just how bmw likes to set their machines up. But I totally agree. It's backwards. 😕

@grahamnelson5376 3 жыл бұрын

@@daviddonaghy6494 you can flip the shifting direction on any motorcycle by just inverting the direction of the linkage

@beauson1983 3 жыл бұрын

@Lassi Kinnunen Forward down is better coz physics. Its easier to shift forward when you're being pushed forward under braking. Thats why it's done that way in 99% of setups.

@matthewmcauley7982 3 жыл бұрын

I am more concerned about you rolling now more then ever. Consider beefing up that cage!

@fordmanfinis 3 жыл бұрын

Yeah for how thin that tubing is they need to make it like a rock bouncer.

@matthewmcauley7982 3 жыл бұрын

@Quirin M. agreed the weigh is much different but steel will still move at high speeds, bend, flex etc that cage is my concern! If it rolls and folds like origami then we will know. With the power plant they have a few more pounds of iron certainly can't hurt?!?!?!

@lvpheno7025 3 жыл бұрын

they built that cage like shit.!!!!!!! offroad race trucks,bouncers,sandrails all have triangles that all meet in the cage work. these guys side tubing and supports are just straight bars. CAGE WOULD FAIL AND KILL SOMEONE,, these guys should never be followed and never build how they build. not safe for anyone. dont know how they have a channel

@rivergray5202 3 жыл бұрын

Yes for sure that tubing will just get smushed

@SrSideral 3 жыл бұрын

@@lvpheno7025 it's re*neck engineering dude, everybody knows is not safe. you are seeing someone asking for project plans? exactly... but it's fun to watch.

@maxpetification 3 жыл бұрын

in race cars you actually pull to shift up and push to shift down

@james13914 3 жыл бұрын

Recommend down to shift up as you will be have the force on you pulling you back not forward and when you put the brakes on you can easly push forward going down gears

@elikedrowski6181 3 жыл бұрын

I was looking for this comment. Pull up. Push down

@snaxgalore5764 3 жыл бұрын

Exactly

@ripurhrtout 3 жыл бұрын

I was about to say the same

@nz540im3 3 жыл бұрын

Yea sequential race shifters are normally push away for downshift pull towards for up shift

@420A11DAY420 3 жыл бұрын

The peddles are the nicest thing on this

@josephhertzberg2734 3 жыл бұрын

Pedals

@CaptainScarlet1961 3 жыл бұрын

Still no chuffing water in the plasma table bed though, they might realise eventually!!!

@gogle5238 3 жыл бұрын

R u serious?

@colemayhew4944 3 жыл бұрын

I would have rather seen a pause stop and play button for pedals

@samcragg88 3 жыл бұрын

You’re not wrong!

@ronsafranic5177 3 жыл бұрын

I know you guys just love to do things as jenkey as possible but I feel the need to mention that if the motor you are using has a computer it should never be in the vehicle when you are welding on it!

@joshuareilly2211 3 жыл бұрын

BEEN WAITING ON THE FIRST RIP FOR SOOO LONG!

@shawnmurphy3787 3 жыл бұрын

Still can't believe how good that motor runs you guys it's sick af y'all

@ryangrissom3532 3 жыл бұрын

I see everyone saying roll cage, anyone else curious about cross bracing those front upper strut mounts. I feel like a good hit or jump and they will fold upwards

@matthewmcauley7982 3 жыл бұрын

I do not disagree! But safety first frame! When that front end folds that cage is going to kill someone! Ike "it will be fine".... me "till its not" I understand the learning curves and the slowly building bigger toys.. but with this much rip um they need a cage, seat and harness capable of saving thier goofy butts! Love the vids, love the work they put in to these vids but we really need to band together and stop them before someone loses an eye....

@1one3_Racing 3 жыл бұрын

At least once its broken we won't have to look at it any more.

@1one3_Racing 3 жыл бұрын

@dylan zrim I suggest ANYONE doing fabrication of a vehicle from go-kart to rock bouncer look up race car roll cage specs. Particularly for circuit and rally. Drag and drift cages are pretty shoddy, circuit cage is the minimum I would recommend. Rally cage is NUTS but it gives you an idea of what is required for safety when it comes to hitting a tree at 60

@matthewmcauley7982 3 жыл бұрын

@@1one3_Racing they way these guys are going these may one day need to think rally cage goofballs

@dingle_burry 3 жыл бұрын

that spaghetti roll cage is going to snap like ... well a spaghetti

@eighty.eight_productions 3 жыл бұрын

Agree

@robmanueb. 3 жыл бұрын

I think they missed the triangulation memo

@thedude7726 3 жыл бұрын

Itll be fine.

@rvabosozoku9019 3 жыл бұрын

I’m taking a wild guess and saying it’s not done yet

@BUILDNIGHT 3 жыл бұрын

Charles isn’t WELDING on the frame with the BATTERY STILL CONNECTED, is he?!?!

@ElCidSilverBlade 3 жыл бұрын

that was my thoughts also. will burn out the computer and or ignition module real fast

@daviddonaghy6494 3 жыл бұрын

I would say yes to that. That might explain the running problem.

@derpydog1008 3 жыл бұрын

It'll be fine.

@CaptainScarlet1961 3 жыл бұрын

@@ElCidSilverBlade: That's a myth, it'll only damage the computer & ignition if you're welding with the ignition on & who does that right!

@TylerDuysen 3 жыл бұрын

@@CaptainScarlet1961 not true it will do it to any vehicle with computer grounded to the chassis its not a myth

@bigpermsgarage6290 3 жыл бұрын

Very cool build, I'm slapping a snow mobile engine on a go kart. Of course I borrowed the idea from you guys.

@bradhatch9851 3 жыл бұрын

Dumb question are you guys welding with a battery still hooked up that can fry a computer in no time

@tommydmot7725 3 жыл бұрын

Could grenade the battery too.

@1one3_Racing 3 жыл бұрын

This looks like a cobbled together buggy that some farmer made for his kid out of old water pipe.

@anthonyaguiar8919 3 жыл бұрын

I agree, I'm not seeing a trophy truck at all just a big go cart with a real axle this time

@SketchyAtBest 3 жыл бұрын

LMFAO

@richardauthement3105 3 жыл бұрын

good to see fellow users of the kiss method.

@emanuel8198 3 жыл бұрын

tip: try the factory exhaust because some bikes need a bit of restriction because thats how there tuned it may be a bit smoother

@DoRC 3 жыл бұрын

Most sequential shift race cars have you pulled back for up shift and push forward for downshift. This way you are pushing and pulling with the forces of inertia as you accelerate and decelerate

@StupidEarthlings 3 жыл бұрын

"Keep it simple" he says, ...lol.. after "creating" THAT front end...lol... ;)

@fishingguy9750 3 жыл бұрын

Not sure if you guys said this in the video, but I would throw some paint on the frame before it rots out

@Sirpalmbranch 3 жыл бұрын

I think it's only surface rust, it's really easy to just sand off.

@fishingguy9750 3 жыл бұрын

Yeah but I was just saying that it could rot out it they don't take care of it

@sniffys 3 жыл бұрын

I really appreciate the entertainment these guys offer. I'd rather be watching this kind of stuff than what on TV that's for sure. I agree with everyones comments on the roll cage. I would also suggest there might be some problems with the clutch down the line. It was never meant to move that much weight and I can see it failing fairly quickly. Just my thoughts 👍

@RealSuburbanCowboy 3 жыл бұрын

Super cool build guys. I love the way this channel has evolved. Good stuff all around!

@Alfred..E..Neuman 3 жыл бұрын

I just have one question, why is Owen Wilson in your shop working on the motor cart??....Is he on the payroll now??

@bonzogamer6966 3 жыл бұрын

He is just here because they need a cute one.

@donbot5000 3 жыл бұрын

Thats young Joe exotic sir.

@badWithComputer 3 жыл бұрын

Wow

@chriskalomiris4377 3 жыл бұрын

Welding on that frame can spike the Ecm.

@TylerDuysen 3 жыл бұрын

@The Truth of the Matter not true the computer has a constant 12v signal going in for computer memory they welded with the battery hooked up and it shorted the computer

@hensleyshobbies-doug7761 3 жыл бұрын

That’s just too friggin cool! I love it! Y’all get those bugs worked out of it, that sob will definitely be a beast! Get er done fellars, get er done!

@johnnygoins7457 3 жыл бұрын

Nice looking rig. Sounds good too. You should use a velocity joint and you wont notice the angle and would be smoother running

@arnoldchildress8053 3 жыл бұрын

I knew John was going to break it

@TheOneRiv 3 жыл бұрын

3:07 Y’alls exhaust is trying to be a valveless pulsejet!

@BecksArmory 3 жыл бұрын

I also have a crossfire pro. I noticed that your torch is a little loose in the video. I see it rotate a bit when it moves. That will reduce your cut quality. Also you can put a sketch on the face of a part and attach a tool path to single lines. Just select "center" instead of left or right when setting up your tool path. Also change your lead in and out to zero degrees and it will just extend the line a little. For holes I use 90 degree lead in with .07" to .125" distance. For small holes you will not be able to use the full .125" and you'll have to knock it down a bit.

@simont3686 3 жыл бұрын

I found an old moped in our shed. Fork is stuck, rims are a bit mangled but the engine fired up first kick! This thing is 60 years old and stood for 32 years! First kick!

@isaiahwade1484 3 жыл бұрын

I'll say it again, that is a REALLY bad location for the radiator. Between three of you guys I can't believe you didn't think to put it up behind the seat on the frame bars that met at the top. By the wheel it's going to get pelted with rocks and filled with mud and dirt. 👎

@derpydog1008 3 жыл бұрын

I was thinking the same thing. If they just face it forwards It will get better airflow to. I think they are gonna have cooling problems in the future.

@JayC133 3 жыл бұрын

I swear this was meant to be a high ground clearance even "rock crawler" type vehicle. Now it's a open flat space speed machine? I think they've realised a little too late that they've built a pig and have to run with it. Including poorly placed items and janky solutions made to fit around problems that could have been solved earlier in the build.

@isaiahwade1484 3 жыл бұрын

@Jeff Kopis that's why you make sure it doesn't spring a leak. Real Trophy Trucks with open backs have been running this setup for years. The inlet and outlet of the rad doesn't even have to be facing forward. That way if it does leak it will spray out towards the back. What I'm explaining is the all out perfect location for the rad. It's protected and will have much better airflow. Look at these setups: www.google.com/search?q=trophy+truck+rear+radiator+replacement&prmd=sivn&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjywY7a48HsAhXGnOAKHdQgBQAQ_AUoAnoECAMQAg&biw=360&bih=630&dpr=3#imgrc=aUNQk4G1lQosbM www.google.com/search?q=trophy+truck+rear+radiator+replacement&prmd=sivn&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjywY7a48HsAhXGnOAKHdQgBQAQ_AUoAnoECAMQAg&biw=360&bih=630&dpr=3#imgrc=Kg4V4-jspM5yzM

@isaiahwade1484 3 жыл бұрын

@@derpydog1008 Exactly! Either cooling problems or it's going to get punctured or clogged by something.

@isaiahwade1484 3 жыл бұрын

@@JayC133 yep, and people have been commenting on these issues since they started the build. They really need to take constructive criticism better and implement the really good ideas.

@kx519 3 жыл бұрын

The coolant likely has a massive air pocket if it isn't warming the return pipe.

@MrTheHillfolk 3 жыл бұрын

Or the stat is stuck closed

@andrewlord9308 3 жыл бұрын

Glad you guys finished

@DCDLaserCNC 3 жыл бұрын

That new Plasma CNC is such an awesome addition to your shop! I am looking forward to seeing put to more use in future projects.

@harrisong5232 3 жыл бұрын

LETS GOOOO BEEN WAITING FOR THIS ONE!!!

@Gissel1503 3 жыл бұрын

same dude

@Vasyahumor 3 жыл бұрын

kzfaq.info/get/bejne/asBgqchlmqnPkYE.html

@Tampaboys 3 жыл бұрын

Can’t wait to see this thing all painted up going to be so sweet

@supastihl89 3 жыл бұрын

Sounds awewome. Need some bars near your elbows to keep you protected. Sliding seat back will put more weight on the rear tires for more traction... great build

@eliancastillo726 3 жыл бұрын

Awesome machine would love to see the dragrail. Have a good day everyone.

@folop86 3 жыл бұрын

You should sell those pedals on your store.

@Tampaboys 3 жыл бұрын

Those pedals are so sweet

@ronniewilliz153 3 жыл бұрын

Tampa nice im in lee county ima sub to you. I love finding local guys on yt

@Tampaboys 3 жыл бұрын

@@ronniewilliz153 heck ya brother right back at ya

@gromit7073 3 жыл бұрын

I like how they include parts of the troubleshooting process, it seems like the ability to efficiently problem solve is what separates good mechanics from bad ones.

@bartinater 3 жыл бұрын

Try starting your plasma cuts off the finish edge (like in the center of your hole). Helps with that starting burr

@danteverna4261 3 жыл бұрын

This is one of those videos I had to hit like on before it even loaded

@ahwhat4830 3 жыл бұрын

Same

@tstricklin4808 3 жыл бұрын

😂

@Tampaboys 3 жыл бұрын

Heck ya so sweet guys y’all are the best

@rong4189 3 жыл бұрын

Wow, almost 900K guys, good job!

@outlawed_kustoms3825 3 жыл бұрын

After all the reinforcement is done and you guys have welded it completely. You should put some body panels on it and make it the official carsandcameras pace kart. Set possibly a new grand prix record and then put it up against the crossbart. This trophy kart would look sick with some panels and a big ol C&C logo and just a touch of paint. But definitely leave the cage and frame itself alone for now until absolutely needed if needed at all.

@stevenpugh7896 3 жыл бұрын

when is mini mayhem gonna be? I want to see if I can go. Hopefully I can.

@DonovanBryant92 3 жыл бұрын

Sadly cause of covid it might not happen for a long while

@stevenpugh7896 3 жыл бұрын

You right on that bud

@tylerbair6032 3 жыл бұрын

How real men become deaf 😂

@johnmorgan1629 3 жыл бұрын

PARDON!?

@derpydog1008 3 жыл бұрын

Eardrums are overrated.

@carabela125 3 жыл бұрын

Whatdya say?

@jeffyates4813 3 жыл бұрын

Guys mount your leader board to the ceiling with hinges and a rope and pulley in the center of the shop. The silver will help reflect the light when up and make it easier to do your times when you do that segment and setting up the cameras...

@markcargill1185 3 жыл бұрын

Looking at the creek it would be perfect for an rc crawler course. Have you ever thought about building up an rc to run the creek bed?

@timothyhays1817 3 жыл бұрын

"It's a really warm flame". Have ever met a cold flame?

@dawsonmcgrawvlogs6421 3 жыл бұрын

Less go first viewer and u guy should bring back the black widow

@macenbarmore1900 3 жыл бұрын

You should pull back to shift up and forward to shift down !! Like a reverse shift pattern in a hot rod , race truck ect. That's better think about it when your ripping thru the gears getting pushed into the seat it's easier to pull back !! Probably to late but thought I would give you guys my opinion !! Anyways love your videos and watch every one love you guys !!

@antoineherrera1019 3 жыл бұрын

That thing runs like a beast already keep up the good work guys 💯🙌

@DaleC. 3 жыл бұрын

by far my least favorite project..... but im still watching. on to the next!!

@Simplytanner 3 жыл бұрын

Please stop welding on a computerized system while the battery is connected!!

@piercemccauley7079 2 жыл бұрын

You guys number one vocabulary is “it’s fine” and I love that cuz that’s how I am too. If it works it works

@MakinEndsMeet69 3 жыл бұрын

One hell of a project can't wait until it's done. But seriously, I would get the Torches out and do a total redesign that thing looks so dangerous it's not even funny. And I don't say this lightly because I've been on some pretty wild vehicles. I applaud your initiative. Just like the time I took a Fiat 850 spider motor and trans axle and bolted it on a 10-foot go-kart I must have been insane but I had fun doing wheelies cuz that's all it would do. Please guys reconsider I want you around for a while longer so I can watch some more videos. Stay safe stay well and as always God bless

@junkhondas481 3 жыл бұрын

I think the problem is it’s a bmw

@ceramic49 3 жыл бұрын

Put a 426 HEMI in that puppy : MOPAR!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@junkhondas481 3 жыл бұрын

@@ceramic49 or a 427 or maybe even a 632 just for fun

@derpydog1008 3 жыл бұрын

Haha break my wallet.

@junkhondas481 3 жыл бұрын

@@derpydog1008 mine two. I can only afford to build 350s in my square body’s

@ceramic49 3 жыл бұрын

@@derpydog1008 I know where one is just gathering dust, leftover from the West Coast Hemi's team built by my late father Harry Holton. only run ya about 50 grand LOL

@dtvtechrp 3 жыл бұрын

It's definitely an ugly duckling 🤔

@mrrooter601 3 жыл бұрын

Needs some panels and a windshield

@shelbykingnfs7216 3 жыл бұрын

Wow when that thing fired up on all cylinders the first time there was such a difference in the sound! It went from harley to sports bike and it sounds mad!

@sweettooth80 3 жыл бұрын

Build a air scoop over the radiator so when you drive it will force are through it as well as the electrical fan

@Tampaboys 3 жыл бұрын

This sounds so nasty great job

@RoadXproductions 3 жыл бұрын

W[ooooo first comment. Love the vids. Btw im a teen and I want to work on go karts like you guys you inspire me

@romanh.9271 3 жыл бұрын

Same

@reidmorin7984 3 жыл бұрын

How can 8 people be first

@jacobsomsky412 3 жыл бұрын

I am also a teenager and I am building a gsxr 600 rail buggy

@oraldribblesjrakasaliva 3 жыл бұрын

Me too! I want to do KZfaq too.

@bustinyanutz4195 3 жыл бұрын

@@reidmorin7984 it's a special Olympics race

@99milesaway41 3 жыл бұрын

Man that thing's awesome, and I love how it sounds!

@dirkdigler5332 3 жыл бұрын

Hey guys; remember the faster you make stuff the more dangerous it becomes. Make certain you guys protect yourselves, would not like to see anything bad happen. Very cool build!

@paveldzhurylyuk6076 3 жыл бұрын

BMW with electrical problems... typical

@derpydog1008 3 жыл бұрын

🤣

@CaptainScarlet1961 3 жыл бұрын

Except it isn't typical for BMW's & it's simply a symptom of a butchered wiring harness & would be for any other in the same condition, Italian bikes typically suffer from dodgy electrics but if you really knew about European motorcycles you'd know that eh!

@paveldzhurylyuk6076 3 жыл бұрын

@@CaptainScarlet1961 issa joke but it stems from truth, I've been In a couple beamers and they're always fucky with the multimedia player and they never quite work right in my experiences. That's not the whole electronics system though.

@quadshopcustoms1228 3 жыл бұрын

FIX THE CROSSKART

@Snw-vi6xd 3 жыл бұрын

Love this channel so much! Hope to see some more vintage honda content soon to! You guys are keeping me going through covid lol.

@DocumentaryHub 3 жыл бұрын

Great job guys. A friendly advice tho. Make the shifter that pulling is shifting up. I think at the end you guys prefer that.

@MBarber107 3 жыл бұрын

GUYS! Your ears! Please, protect yourselves! Hearing doesn't come back.

@ryangrissom3532 3 жыл бұрын

WHAT?

@bonzogamer6966 3 жыл бұрын

And C'mon man, Wear A Mask!!!

@SketchyAtBest 3 жыл бұрын

@@ryangrissom3532 LOL

@sxrenity2785 3 жыл бұрын

This buggy is so poorly designed

@ATCRyderX 3 жыл бұрын

its like someone sold that BMW engine, welded up a steel "crate" to ship it in and these guys somehow found it like: "wow! Go Kart! Just missing a few parts!

@jordanlawrence7546 3 жыл бұрын

Great video guys! You guys are just smart with these things!👍

@r7kelley553 3 жыл бұрын

This thing is actually startlingly be pretty damn cool. I can't wait to see how it turns out.

@BranTooBland 3 жыл бұрын

I would honestly rethink the whole design. You could definitely do something less janky and dangerous. Y'all build epic stuff all the time. This is by far the worst design/build quality I've seen from y'all in my opinion. I believe if you take your time and rethink the whole build it could be something that would bring more success for y'all. Edit: try thinking of building from the cockpit then design around that. Better seat. Better protection for the driver.. Ect..

@EdWolfram 3 жыл бұрын

I would be miss shifting like made with the ups and downs that way. Ty for the content Guys

@TheBestOrion 3 жыл бұрын

I can't wait to see a full send of the trophy kart 😁

@ty0boil212 3 жыл бұрын

Great work guys its always nice yo see you guys on my feed.

@chrisstockton7153 3 жыл бұрын

Just a little tip, not sure if you guys will ever run into this problem at all. But in the past I have fried ECM's from welding on chassis without the the battery disconnected. So just to save you a little head ache possibly in the future. If it happens to be a newer computer you should disconnect the battery while welding. Its only happened to me on two different occasions. I thinks its awesome the thing you guys build. I bought an old 1985 Honda Odyssey that I planned on putting my 04 Honda CBR600F4i engine in. Cant wait to knock it out and rip it at the sand dunes

@vernerivirta3045 3 жыл бұрын

that shifting looks pretty harsh, i mean like i would have prefered it the other way "aerodynamic" way. with higher gear when pulling back and lower when pushing forward. You might alsowant check the throw of it, it looks like it has a quite a big distance, but coming along nicely, those pedals are the little things you guys need in these builds!!!

@Brock_Landers 3 жыл бұрын

It really sounds so good. I always laugh when a guy rolls past me on a BMW bike because they're SO quiet and they're very underwhelming motorcycles, but this engine sounds really good and snappy.

@RJ31586 3 жыл бұрын

When that drive shaft snaps that's going to be a nice little nut buster

@tkskagen 3 жыл бұрын

Trophy Truck needs one of those 1970's "FOOT" Pedals for the Accelerator!

@elikedrowski6181 3 жыл бұрын

Yes!! The ole barefoot gas pedal

@tkskagen 3 жыл бұрын

@@elikedrowski6181 If they are even Available any more!

@elikedrowski6181 3 жыл бұрын

@@tkskagen I swear I've seen them at my local AutoZone way up here in Wisconsin. Course my memory is sort of like an old cassette tape that you can record over so I might be making that up without even knowing it

@manueltovar4821 3 жыл бұрын

This is very far from being a trophy truck calling this a trophy truck is disrespecting them like Ricky Johnson said I'd you could look up the word macho in a dictionary they should be a pic trophy truck and this this has nothing macho about it

@rogertalley7944 3 жыл бұрын

Since everyone else is chiming in,,,first off, a heck of a good job!! I mean for real. Next thing is they actually make a universal pivot for drive shafts it's like knuckle. You could turn the angle of tge rear end up more and or put like a limit chain on the rear end so it doesn't go down when you let off the gas. I'm going to say that's why it pops out. Also I know Ike knows this but maybe just hasn't thought about it. Always disconnect the battery when you are welding because you can and will fry ECM, ICM, etc. And remember it's always easier for us viewers to see things, I'm still extremely impressed with not only your abilities but your friendship as well. Keep on keeping on. The batteries died in my ezgo golf cart so I'm about to tackle putting in a 110 cc motorcycle engine in it. It's converter clutched and electric start so here we go.

@ajsmith2142 3 жыл бұрын

Awesome project, glad to see her on the move. I mean you have to redo the driveshaft and rear anyway.... mine as well make it all wheel drive while you’re at it!

@NickMakesBreaksStuff 3 жыл бұрын

That thing sounds awesome!

@vtd-4764 3 жыл бұрын

Me want that plasma cutter! 😋 Good engineering guys.

@dumbasscountryboy 3 жыл бұрын

I thought all flames were warm Isaac. Lol. You crack me up dude.

@sirrotten6963 3 жыл бұрын

Maybe you could tilt the rear end up a little bit?, And Audi old valve spring or something on the BMW side of the drive shaft to keep some spring tension on the rear end? Something to think about. :-)