4WD Power Wheels Go Kart First Drive! 228cc Custom 4X4 Ford Bronco Lives!

Рет қаралды 199,816

3 жыл бұрын

Our custom built Ford Bronco Power Wheels go kart drives for the first time! We still have a ton of optimization and tuning to do on this go kart, including swapping to a much shorter gear ratio (the theoretical top speed is over 100mph, but acceleration is poor and it's hard on the torque converter belt), fabricating and installing a floor, hand controls for gas and brake, and stiffening the suspension. So far, it's great! Definitely one of the smoothest first drive's we've had. The steering radius isn't great, and we're limited by the CV axles in the front suspension, and because both front and rear axles are always locked, it tends to understeer on tight corners. Other than that, this thing is great.
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
Live axle kit: bit.ly/359NJ1J
28mm Mikuni flat slide carburetor: bit.ly/3oWSFRJ
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 830

@CarsandCameras 3 жыл бұрын

I think Ike looks funnier on this than he does on a Honda Monkey XD

@fake_smile3348 3 жыл бұрын

Y don't yall extend it so your lower in the cart

@14thstreetvibes92 3 жыл бұрын

😂true

@Andrew-ft7hu 3 жыл бұрын

Ike how you do a burnout with 4wheel drive?

@fake_smile3348 3 жыл бұрын

@@Andrew-ft7hu you cant endless u put your front bumper on a wall or something

@mr.random4472 3 жыл бұрын

yeah

@mrstowe12 3 жыл бұрын

Anybody else expect John to crash it when he picked up speed ? Jk this is dope

@EJ-74 3 жыл бұрын

IT wouldn't have surprised me 😁🤣😂 Hey it's all in good fun and dope as hell to watch 🔥👍✌️ Long as nobody gets seriously hurt that is!!!

@discingaround 3 жыл бұрын

I'm giving it two more episodes before he crashes it. Anyone taking bets or....???

@wouldyouglowme4235 3 жыл бұрын

@@discingaround I’ll say next episode

@loganrodriguez1782 3 жыл бұрын

Yes I was like “Let go of the gas, Let go of the gas, LET GO OF THE GAS!!”

@derpydog1008 3 жыл бұрын

Yall should build a boat for the pond like maybe a 212 airboat or something.

@donellmuniz590 3 жыл бұрын

Ya'all see Titanic?🤣🐟🐠🐢🐸

@colbyturbeville2946 3 жыл бұрын

A boat c’mon man

@wouldyouglowme4235 3 жыл бұрын

Lol joe biden cmon man

@lylekehrer6159 3 жыл бұрын

Unless they borrowed parts, they have the 'tank boat'

@derpydog1008 3 жыл бұрын

@@lylekehrer6159 I think they junked it out.

@devivoman 3 жыл бұрын

"Where did the 10mm socket go?" "I think I may have welded it into the steering column"

@josephdurish2315 3 жыл бұрын

I just lost my 10

@tterryshenanigans1820 3 жыл бұрын

You guys had 10s?

@josephdurish2315 3 жыл бұрын

@@tterryshenanigans1820 not for long

@nicoketterer9665 3 жыл бұрын

I would recommend stretching the whole frame in length. Then it will steer much better and so will get more power to the ground. Also Ike will fit in much better ;)

@davidcorfitzson5211 3 жыл бұрын

That's exactly what I was thinking

@iFleebag 3 жыл бұрын

Wouldn’t stretching it make the turning radius worse?

@gonracn 3 жыл бұрын

Stretch the frame and raise the engine a bit (if necessary) to be able to get a proper steering angle. No reason for it to be this small- just looks uncomfortable for both of you. Would be way more fun if you can sit in it for more than 20min!

@nicoketterer9665 3 жыл бұрын

@@gonracn i agree with you, but i wouldn't raise the engine, just to keep the centre of mass low

@quadshopcustoms1228 3 жыл бұрын

Rather B welding extended their grave ninga 650 a few inches. Yall need to do that. Chop the frame, put plugs in and welderup.

@lethargicstove2024 3 жыл бұрын

I thought you said the n word😂

@quadshopcustoms1228 3 жыл бұрын

@@lethargicstove2024 no

@g0ldensample21 3 жыл бұрын

I agree. I want to like it, but it's just to short. It's built for my 6 year it looks like.

@Acoustic_Theory 3 жыл бұрын

John: "I can't wait to jump it." Ike: "I'll get the Life Flight on standby."

@Cactusruss1 3 жыл бұрын

If you guys are enjoying the build, then disregard all the negative, not building anything people in the comments. I enjoy seeing the builds and watching the learning process that you guys go through. Mistakes are made. Solutions are reached. and you guys have a ton of fun doing it all. Hats off to you and look forward to many more experiments and builds.

@psyko2666 3 жыл бұрын

"When you inflated it, it gets bigger" Giggidy

@bobbyschram2206 3 жыл бұрын

Is John going to hit a tree with this one to lol

@colbyturbeville2946 3 жыл бұрын

Yes he is

@Acoustic_Theory 3 жыл бұрын

It's not just small, it is truly smol.

@alexpaumen3937 3 жыл бұрын

Every kid needs a beast of an engine like this on their Power Wheels.

@FoolOfATuque 3 жыл бұрын

That thing is cool! I love it and can’t wait to see it all finished!

@jrandreas3623 3 жыл бұрын

Many of your guys builds are cool but this one is by far my favourite

@isaachart4136 3 жыл бұрын

I was just looking for something to watch

@jasonnguyen2801 3 жыл бұрын

You should build a jeep version with a different engine and then you should race them on the cars and cameras grand prix.

@EJ-74 3 жыл бұрын

They need to build 2 comparable to Rather B`sc Grave Digger and Grind Hard`s Coronol etc and have a epic race around the grand prix or go on a cool adventure etc What you said would be cool also ✌️

@27Zangle 3 жыл бұрын

@@EJ-74 - That would be cool, but Rather B's needs some serious help because it is extremely weak structurally. However, it is cool looking.

@EJ-74 3 жыл бұрын

@@27Zangle Yeah he does need to strengthen it badly ✌️

@costdelta3705 3 жыл бұрын

Imagine all of the Power wheels go karts on KZfaq racing on GHPC's Rally corse

@Ozsmallbore 3 жыл бұрын

The jeep one would keep breaking down...

@hammerT2997 3 жыл бұрын

I'm digging it guys. Ready to see that guy in action again.

@notoriousbige281 3 жыл бұрын

We need more 4x4 builds ! Awesome job guys

@islandlife9127 3 жыл бұрын

Awesome build. I can't wait to see this full send.

@feeterican 3 жыл бұрын

I thought the suspension looked fine. It looked like it was floating like those trophy trucks that do the Baja 500. If it were me I would keep it like that until it starts bottoming out.

@Tampaboys 3 жыл бұрын

Heck ya been waiting on today this little thing is so cool great job on this build guys

@DanITGuy 3 жыл бұрын

HaHa Me Too Bro!

@Hunting451 3 жыл бұрын

Be careful when John the crash dummy drives it. 😳🥴😝

@discingaround 3 жыл бұрын

LOL! John is getting so much shade in the comments. The truth is he's just so expert at mini bikes that anything else he drives gets crashed into a tree to make room in the world for more mini bikes.

@brandonfloyd6321 3 жыл бұрын

Johnny crash

@socialxperiment3162 3 жыл бұрын

@@discingaround he crashes mini bikes too bro

@ryanpanizzoli9850 3 жыл бұрын

Hello, hope you have a great day!!! I love how you explained how to put the new axle in.

@jfow422 3 жыл бұрын

Idk why I doubted you guys. I didn't expect it to come out lookin this good. Keep up the good work

@reddog543211 3 жыл бұрын

Great progress !!!.....🤘

@tslater1989 3 жыл бұрын

I love it looks awesome. I know you were going for lightweight small footprint. But I think making it 3-4 inches longer would be hugely beneficial.

@lisaledden2179 3 жыл бұрын

21:41 Definitly PUTTING back to the shop!!!😂

@KEIFabrication 3 жыл бұрын

That is one of the coolest and best builds yet! Lots of potential!

@Iwaswrong578 3 жыл бұрын

So proud of the extensive knowledge you guys have learned over just a short amount of time? Great job fellas 🤘😁👍

@zachdavis4597 3 жыл бұрын

Love the socket set u joints, great idea

@stephenerickson2514 3 жыл бұрын

Congratulations guys

@shakyhandpictures2185 3 жыл бұрын

Great work boys!

@henryescat1104 3 жыл бұрын

I can't wait to see the body together in one piece. So it's level in the front & back. It looks incredible!

@Evilslayer73 3 жыл бұрын

nice work guys :) cant wait to see more tuning on this :)

@mikehatfield3561 3 жыл бұрын

One-off the things we love about cars and cameras is the use what ya have For testing purposes only of course lol

@timothymartin5665 3 жыл бұрын

Thanks for the content you guys are great keep up the good work God bless

@patricktolmie6985 3 жыл бұрын

It's cool to see it finally going good luck with that guys

@Jonny2Fingers 3 жыл бұрын

Yes! Been patiently waiting for this video!!!

@nicoverduin 3 жыл бұрын

congrates dudes......amazing job is done and will be continued...greet from Holland

@handiman5001 3 жыл бұрын

Why does John think everything they build has to be wrecked by jumping or going faster than is safe risking an accident -- this is one of your best builds EVER and it's not finished. Ike thinks it's puttering along, I think it was going about as fast anything that small (THAT CARRIES full size adults) should go. I'd love to see something you build stay together fer ever. LOVED the VID and BUILD

@donaldsandstedt337 3 жыл бұрын

Cool as hell nice job

@dylanromine4101 3 жыл бұрын

"Dang it bobby, thats all we got" my fave line

@cyleburnett7696 3 жыл бұрын

By far the best build yall have made in my opinion other than the cross kart, nice!!!!

@iamlonefrog4866 3 жыл бұрын

Well done gentlemen🤙

@Jalen_Knight8526 Жыл бұрын

I love the “unconventional” steering setup with the socket adapter. It looks pretty darn convenient to me. It has worked good all of this time for 2 years now that the project is finished.

@ezradbass 3 жыл бұрын

Respect...that’s clean

@ghomerhust 3 жыл бұрын

that thing looks fantastic. it really does just float over the bumps. you could watch the front control arms just sucking up every bit of the road but the body didnt vibrate at all with it. top knotch

@JamesCouch777 3 жыл бұрын

That is some serious insanity right there 👍 I love it 😁

@tjslifeispie 3 жыл бұрын

Excited to see this one

@anthonyross9276 3 жыл бұрын

very well done gentleman!!

@lukasspears7687 3 жыл бұрын

Now you need a blazer 4x4 to go along with it!

@VanIsleAdventuring 3 жыл бұрын

You Guys are hilarious!! 2 see 2 grown men have this much fun and passion on these mini machines is very satisfying 👌. Well done lads.

@johnweeks5614 3 жыл бұрын

To add weight in the front make a heavy bumper and brush guard but awesome finally a true off road buggy 4x4 for the win

@shawntl 3 жыл бұрын

Good to see it moving

@gradybrowning3976 3 жыл бұрын

Can’t wait to see it rip!!!

@Zombiereaper1 3 жыл бұрын

Hey if that hardened universal cracks, just replace it with an impact rated one, I bet that would work just fine!

@mikeovercash3991 3 жыл бұрын

Good To see running Cool

@GodschildinNC 3 жыл бұрын

No, no, stop,stop!, stop!! I feel you Issac...been there. Glad it turned out well. Good reason for little trees

@cadenkorzan 3 жыл бұрын

that suspension loooks soooo satisfying. i wanna drive it sooo badly

@NDKY67 3 жыл бұрын

That thing looks so diddy : ) I love it.

@InsideOfMyOwnMind 3 жыл бұрын

8:49 The best disclaimer I have ever heard. And sometimes ya just gotta go with the tool ya got. OK now I watched the video and that cart may be the most hilarious thing I've seen on four wheels in awhile. Awesome first run.

@chrisdepuccio5520 3 жыл бұрын

Love you guys by the way Cars and Cameras!

@87octane33 3 жыл бұрын

I did the exact same thing with some steering on a kart a few months ago. Once it's welded up, it works great.

@brandonemmons5438 3 жыл бұрын

That thing is badass

@patrickhardison3955 3 жыл бұрын

Love the bronco.

@JohnHill-jm7tm 3 жыл бұрын

Another great show guys. 🚚😎💗💗

@ebuff57 3 жыл бұрын

Enjoy your project!

@TheVexCortex 3 жыл бұрын

Time to buy a lathe and mill, and make your own U-joints for steering.

@Hellsong89 3 жыл бұрын

Just need lathe and build lifting table on tool holders place. Just chuck the bit and you can machine parts with out spending ridiculous sums to mill.

@deez3814 3 жыл бұрын

You Guys Are AWESOME 😎 🤩

@glendecuir6317 3 жыл бұрын

I like Ike's little last laugh. Bada boom bada bang, send its!

@kennethdispain1807 3 жыл бұрын

Looks like fun

@joshuascoggins6949 3 жыл бұрын

Awsome guys..

@b.r.brommers 3 жыл бұрын

looks nice guys

@calebcurti9932 3 жыл бұрын

That thing is so cool man

@minibikeandbuggy2878 3 жыл бұрын

Cool Watch yall every day

@ifazer8akathedoctor275 3 жыл бұрын

cool AF with those tires

@rockst4rry 3 жыл бұрын

cool ride

@dannyholman169 3 жыл бұрын

That bronco BE TOOTED UP harrrrd love the vids

@carljohnson672 3 жыл бұрын

Boys that thing is sweet can’t wait till it’s finished

@pumkinvine4175 3 жыл бұрын

They never finish anything, so...

@lucerofam5 3 жыл бұрын

Need to also put some roller skates on the back bumper for them wheelies 😂

@michaelhill4015 3 жыл бұрын

Looks like it's coming along.

@yessir6523 3 жыл бұрын

I might of been better at this when I was ten. But that's why I watch. ENTERTAINING!

@fasteddy917 3 жыл бұрын

Ike looks like a Russian bear riding a bicycle but darn it, you fellas do fine work.

@Chad_D 3 жыл бұрын

I like the consistent set of music yall be using now =) .

@tiffanyrenee7423 3 жыл бұрын

I knew Yall Was Going To Get It Running Yall Been working working working on the bronco

@tallboy2234 3 жыл бұрын

The Angle of the Dangle ... or the Droop to the Loop!🤣😂👌

@nicholasjamesvavricek7171 3 жыл бұрын

John , dont forget the brakes , before u go jumpin it . Lol . I can c him wrecking first good jump , lol . Looks great thow guys .

@oilfieldequipsalesoes4342 3 жыл бұрын

sounds like a little mini keg fuel tank mounted on the front would solve the plowing problem and look cool too!

@mriippa 3 жыл бұрын

looking fine

@raylansall4434 3 жыл бұрын

Look like fun 👍👍👍👍👍

@vrmn11 3 жыл бұрын

Very Cool

@bubbasatrueredneck 3 жыл бұрын

Love it love yall from Franklin county nc

@dannymoore3703 3 жыл бұрын

Nailed it!

@froggersgarage5127 3 жыл бұрын

"Dang it bobby it's all we have" 😂😂 that's hilarious

@christophermorin9036 3 жыл бұрын

That thing rides so smooooth....

@krhyne 3 жыл бұрын

awesome!

@claytonhall9447 3 жыл бұрын

Way better then anything i could build mine would be held together by hopes and dreams

@4486xxdawson 3 жыл бұрын

Man i wished i lived in the states , i would bring my power wheels escalade over and join the fun , awesome build guys 👍👍👍👍👍👍

@heathroush5343 3 жыл бұрын

I'm glad that John is fine with Isaac being 180 lbs.

@wafflegaming6054 3 жыл бұрын

Hi Cars and cameras love the vids