1018 Steel Grade Guide | Metal Supermarkets

Рет қаралды 16,242

Metal Supermarkets

5 жыл бұрын

In this Grade Guide video, we take a closer look at the chemical and mechanical properties of 1018 Steel.

Пікірлер: 10

@1crazypj 3 жыл бұрын

Subscribed after watching the first video I saw. I seem to remember better when someone tells me something rather than read facts

@mrmrRobbi 3 жыл бұрын

Thanks for the series of guides.

@zxwmabcdef5439 4 жыл бұрын

We even had a pallet of counterfeit 310 stainless steel. It looked funny and I suspected it was 316L. 310 is more yellow because of the nickel. In fact it was 316L.

@hasanhasa1310 3 жыл бұрын

Please What is the rating for cast iron in AISI ... Thank you

@tjvanderloop1686 4 жыл бұрын

Common grades will reveal many mixtures of steel. (Some say there are as many as 10,000 types of steel %-Wow) Tom Vanderloop, Author & Consultant

@zxwmabcdef5439 4 жыл бұрын

Cheap 1018 is not the same as name brand 1018. They might have the same chemical makeup but the grain size and amount of cold work will be different. Fe alloys are forgiving. Ni, Co, Al, and Mg alloys are not forgiving of bad processing at the mill. I have seen Arconic 2024 form perfectly. Generic 2024 would just crack and shatter.

@zxwmabcdef5439 4 жыл бұрын

We had a pallet of 1018 from Curtis Steel that had Luder bands in it. I had heard of that defect but never actually seen it. I told my manager I couldn't use the material because it had yield point runout. He knows a metallurgist and called him. He came over and took a sheet to the lab at UH. The material did have the defect I said it did. Curtis never refunded us or replaced it.

@tjvanderloop1686 3 жыл бұрын

Great Video for Fabrication and Welding. Thanks for a good summary! T J (Tom) Vanderloop, CMfgE; ATEA, AWS & SME Leadership/Membership