#106

Рет қаралды 1,565,936

3 жыл бұрын

This video is about the #106 Build a DIY electric board 2021 for street type
Music by Tokyo Music Walker - Sunset Drive
INSTA - / kamijuins
E-mail - j3i3s3@gmail.com
Parts Infos
Deck: GLOBE
Trucks: Trampa ULTIMATE ATB TRUCK
trampaboards.com/ultimate-atb...
Motor mount pulley kit: Trmapa Original STREET Carver Motor Mount with Motor Axle Support & Pulley kit - TWIN
trampaboards.com/original-str...
Motors: Flipsky BLDC 6384 190KV 4000W
flipsky.net/collections/e-ska...
ESC: Dual FSESC6.6
flipsky.net/collections/elect...
Remote: 2.4G Nano Remote
flipsky.net/collections/acces...
Switch: Anti spark Switch Smart Enhanced 200A
flipsky.net/collections/acces...
Wheels: MBS All-Terrain Longboard Wheels
www.amazon.com/gp/product/B01...
Bearing: 10mm x22mm x6mm Ball Bearings
www.amazon.com/gp/product/B07...
Spacer: Trampa
trampaboards.com/product_sear...
(Find the size you need and buy it)
Carbon fiber sheet: 3k matt twill 3mm (400x200)
ko.aliexpress.com/item/400058...
Riser pad: MCB 1/8" Shock Pad Risers
www.amazon.com/gp/product/B00...
Search and purchase locally
4MM Bullet AMASS Connector Male&Female
XT90 Male & Female AMASS Connectors Plugs
Hex Spacer Nut: M4 size 25mm, 30mm
Dome head Hex Bolts: M4 size 15mm
Countersink Hex Bolts: M4 size 25mm
Cable ties
Heat Shrink Tube 10mm
Interior Film Sheet or car film sheet
PVC foam tape 15 mm (wide) x 10 mm (height).

Пікірлер: 1 200

@KAMiJUINs 3 жыл бұрын

It tried again by improving the lack of e-board that I made last year. I also enjoyed while building and I love the balance of looking. I want to check if the improvement has been made :) 작년에 만들었던 보드의 부족한점들을 개선해서 다시 도전해보았습니다. 이번 빌드도 재미있는 시간이였습니다.외형도 잘나온것 같아서 마음에 듭니다. 개선이 이루워졌는지 빨리 확인해보고 싶습니다.

@user-vk4dt2ik9f 3 жыл бұрын

너무 단단해보인다ㄷ

@SCW82492 3 жыл бұрын

watch you from germany , that is one of the nices build i seen on e- boards. great work. cant wait for a ride video^! Nice Job!

@KAMiJUINs 3 жыл бұрын

@@SCW82492 Thank you for watching :) Vielen Dank.

@fluke307 3 жыл бұрын

Any chance you could post a link for the battery pack?

@KAMiJUINs 3 жыл бұрын

@@fluke307 The reason is to set up the right battery for each person. 12s(42v) or 10s(36v) And capacity

@greenkribs 3 жыл бұрын

this is the perfect example of craftsmanship and a love for what you do!

@KAMiJUINs 3 жыл бұрын

Thank you sooooo much for saying that and watching :)

@joshuamcdonald5850 3 жыл бұрын

oh man, the cable combes are just stunning to look at

@KAMiJUINs 3 жыл бұрын

One of my subscribers recommended this method to me. It's a work I liked too. Thank you for watching :)

@ratheonhudson3311 3 жыл бұрын

The way you tidy the power chords with the zip ties and chord holder is very artistic. I might try to do something similar.

@KAMiJUINs 3 жыл бұрын

Yes you should try :) It's satisfactory work.

@ratheonhudson3311 3 жыл бұрын

@@KAMiJUINs also the Hex M4 long nuts are a nice touch because they add a metal pillar look to contrast the wooden deck.

@nassdolla1389 3 жыл бұрын

I was empress too great job most definitely 💯💯💯💪🏾💪🏾✌🏿

@HACKSGEAR 3 жыл бұрын

kzfaq.info/get/bejne/nOBxopCA1sDDZWg.html kzfaq.info/get/bejne/nOBxopCA1sDDZWg.html

@Daniel-fe3iv 3 жыл бұрын

Um the back of the board is giving me back to the future Delorean vibes. IT'S COOL AS HELL

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@danielwhyatt3278 3 жыл бұрын

OMG, now I see it. Niiice

@Daniel-fe3iv 3 жыл бұрын

@@danielwhyatt3278 RIGHT!?

@angelospalaiopanos1442 3 жыл бұрын

The only time I saw zippers turned to art! My OCD levels went crazy! I shows you love what you do!

@KAMiJUINs 3 жыл бұрын

Thank you for saying that and watching :)

@MIK33EY 3 жыл бұрын

First time ever coming across your channel. Excellent building and well thought out construction. Always wanted to build an electric deck and you’ve inspired me. Already saving up to start ordering parts based on your build. Already excited for your next build. 👍🏼👏🏼👏🏼👍🏼😎😎✌🏼

@KAMiJUINs 3 жыл бұрын

Thank you for watching and i hope you doing well as you want :)

@romeostrose9937 2 жыл бұрын

yo how far are you on starting do

@MIK33EY 2 жыл бұрын

@@romeostrose9937 Since found out that they’re illegal to use on public roads & footpaths in the UK - stupid law that also makes eScooters & some ebikes also illegal to use. If you get caught by the Cops whilst on it the can confiscate it from you and send it to be destroyed and then slap you with a several hundred £ fine (and points on your licence weirdly) People have been getting away with scooters over the pandemic but now things are getting back to normal the Pigs are starting to come down on people again. So, having weighed up the risks of loosing about £300-£500 worth of a deck I’m waiting till the law changes. I still really want to build on, just have to wait about a year or two whilst the UK Government argues things out - hopefully waking up that electric things are better than fossil fuel transport. If you wondering why it’s illegal, it has to do with registration taxes that get collected, along with old laws from the 1800’s and 190’s that haven’t been updated and so they are still active. Everyone knows they’re stupid but it’s hard to get them changed with the Government changing them in Parliament. Keep you fingers crossed for everyone in the UK that the Government wakes up and changes the laws for us. Sorry for the long answer but needed to explain everything so it made sense.

@double_0_6ix26 3 жыл бұрын

Never get bored watching a build vid from you bro. This is an interesting design. I look forward to seeing the ride test ;-)

@KAMiJUINs 3 жыл бұрын

Thanks for always bro :) I haven't ridden it yet, but I hope to get as much riding performance as I thought.

@cameronashcroft4632 3 жыл бұрын

Totally agree, so happy I just found this channel

@DrivingwithNico 3 жыл бұрын

You have no idea how much your videos are helping me on my own project, which is definitely not a skateboard!

@KAMiJUINs 3 жыл бұрын

That's great :) Thank you for watching ~

@xrayaiz74 2 жыл бұрын

Ok, can I say that you're the tech's technician! Damn son, you have skills. That's a really, really nice fabrication job on the board, layout, drilling and the wire/cable management is outstanding. Your music is snazzy, too. This video makes me want to ride one these things. Maybe I'll make one for one of my kids.

@KAMiJUINs 2 жыл бұрын

Thank you for saying that and watching :)

@kimkat5241 3 жыл бұрын

its funny i haddent looked at electric skateboards for about 2 years now, and the ammount of sophistication and elegance it has gotten in the last two years, like propper mounts and casual carbon fiber batery/ecu cover and universal skateboard supsension is quite amazing.

@MentalEdge 3 жыл бұрын

Those are mountain boarding trucks. You don't normally see these in street use, as they cannot be mounted on typical boards, the deck has to have the mounting point on an angle for them to work right. The springs you see serve the same purpose as the urethane bushings on a normal truck. This board has no suspension. But it IS exceptionally well built.

@Sly9192 2 жыл бұрын

Same

@rumble_doodz4067 3 жыл бұрын

That's easily a $1300 board in just parts. not to mention the beautiful workmanship of this man! amazing job.

@KAMiJUINs 3 жыл бұрын

Thank you for saying that and watching :)

@jeffswope1511 2 жыл бұрын

The wire tie dress in was a really nice touch. It’s the little things.

@KAMiJUINs 2 жыл бұрын

Thanks~ :)

@BVLVI 3 жыл бұрын

Beautiful ❤️ absolutely love your style of video making, I enjoyed the everything but the paint stickers. As a boat guy I would have used colored S-,Type fiberglass and resin. S can flex as well as add massive strength for very little weight. Add titanium dioxide directly into resin. Added benefit scratches could be sanded off and buffed out easily.

@KAMiJUINs 3 жыл бұрын

Thank you for watching with your suggestion :)

@ratheonhudson3311 3 жыл бұрын

It's soooo good to see you crafting something wonderful piece by piece. Kami is happy too! I love the colors

@KAMiJUINs 3 жыл бұрын

Yeah I like the color match too :) Thank you for coming as always~

@staypaidkell771 3 жыл бұрын

I’ve been looking for a video like this forever

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@Bikey4LifeeNB 2 жыл бұрын

Waaow! Just waaow! So Much talent! Thats what i want for christmas 🥰

@dwinguzman2759 3 жыл бұрын

Wow. One of the best things i've watched today. Good job, bro.

@KAMiJUINs 3 жыл бұрын

Thank you so much for saying that and watching :)

@facundosuarez9908 3 жыл бұрын

The degree of detail you have, fascinates me

@KAMiJUINs 3 жыл бұрын

Thank you for saying and watching :P

@babbagamevers3782 3 жыл бұрын

It's a beast absolutely lovely

@motocrosskpdmc 3 жыл бұрын

this is insane. i tried to pass the time until i have to leave for work. i did'nt expected to find something so inspiring :) i love what you did!

@KAMiJUINs 3 жыл бұрын

Thank you for saying that and watching my video :)

@quinnfoster4671 3 жыл бұрын

I enjoy these videos in a very profound way. This build here is super cool!

@KAMiJUINs 3 жыл бұрын

Thank you so much for a long time :)

@kevinlove4930 3 жыл бұрын

You make it look so easy... My first build was headache after headache

@KAMiJUINs 3 жыл бұрын

It always looks easy in videos. I also go through several revisions while building it :) Thank you for watching~

@ordelian7795 3 жыл бұрын

"Now ride it." Maker: "Eh what?"

@adrianreyno1 3 жыл бұрын

That is some of the cleanest work I have seen so far. Great job.

@KAMiJUINs 3 жыл бұрын

Thank you for saying that and watching :)

@avva4090 3 жыл бұрын

Beautiful work, this is very inspiring I would love to build an electric board. Cheers, looking forward to more content!

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@RobinAndRalph 3 жыл бұрын

New Kami Juins video = Today will be a good day :D! Much Love // Robin - LAZYROLLING

@KAMiJUINs 3 жыл бұрын

Thank you so much Robin :)and I hope Ralph get well soon!

@curtisbrownelectric 3 жыл бұрын

really cool, awesome editing too. Appreciate all the angles and chill music.

@KAMiJUINs 3 жыл бұрын

Usually, people who watch videos only care about the topic, but I try harder to pay more attention to them(angles, Music) in the process of making video. Thank you very much for recognizing them :)

@pranavb104 2 жыл бұрын

This build made my day. Amazing video, audio, build sequence and what an absolute sick skateboard!! Bravo!

@KAMiJUINs 2 жыл бұрын

Thank you so much for saying and watching :)

@andershestad284 3 жыл бұрын

Nice and relaxing build video as always :) board looks sweet, cant wait to see the ride video!

@KAMiJUINs 3 жыл бұрын

Thank you for watching :) I haven't ridden it yet, but I want to get as much riding performance as I thought.

@mrreddington777 3 жыл бұрын

My goodness this is beautiful.

@KAMiJUINs 3 жыл бұрын

Thank you for watching like that, Mate :)

@steveshot81 3 жыл бұрын

Work of art

@KAMiJUINs 3 жыл бұрын

Thank you for saying that :)

@emailyarabrandao 3 жыл бұрын

MASTER PIECE ;)

@Darksagan 3 жыл бұрын

Wow everything about this video was dope asf. Excellent craftsmanship.

@KAMiJUINs 3 жыл бұрын

Thank you for saying that and watching :)

@sethmcneill5283 3 жыл бұрын

You make the best enclosures. You should do a video of all the best and worst enclosures you've made, and how to measure and prepare one.

@Snowcat259 3 жыл бұрын

From youtube showing a recommended video to a sub from me. Keep riding my dude~

@KAMiJUINs 3 жыл бұрын

Thank you sooooo much for coming my channel :)

@matzedias 3 жыл бұрын

this enclosure is sick !! and..don't forget to give kami his snack he asked for xD

@KAMiJUINs 3 жыл бұрын

Hey, my good friend :) HAHA KAMi always eats a lot of snacks :) And I want to tell you that if someone weighs a lot, split the enclosure into a few parts rather than one piece. even the deck I used is quite stiff, but still it can be a lot of pressure.

@MadDonJuan 3 жыл бұрын

Good to see you back again. Clean build as always. Looking forward to see the riding.. be safe.

@KAMiJUINs 3 жыл бұрын

Thank you so much :) Be safe too~

@johnwayne2103 3 жыл бұрын

WOW that is an impressive build, Those trucks are wide! Great for stability but you always have to remember width.

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@MrShlomo23 3 жыл бұрын

yoooooo sick board! what kind dog is that at the end, super cute!

@KAMiJUINs 3 жыл бұрын

Thank you for watching :) KAMi is a toy poodle~

@martinndirangu2844 3 жыл бұрын

The satisfaction this video gives....truely a masterpiece...👌🏾🚀🔥💯

@KAMiJUINs 3 жыл бұрын

Thank you for saying that and watching :)

@abhimanyubais5199 3 жыл бұрын

I fricken love how you used the zip ties to keep the motor wires nice and spaced out, it looks soooooo guuuuuuud beautiful build as always

@KAMiJUINs 3 жыл бұрын

Thank you for watching like that :)

@ste76539 3 жыл бұрын

I find it quite curious that you picked 'NHS Prosthetic Limb' for the colour.

@spamspasm8183 3 жыл бұрын

Made me spit out my coffee. LMAO.

@nickvanrooyen3247 3 жыл бұрын

I call it "Hearing Aid Beige"

@ste76539 3 жыл бұрын

@@nickvanrooyen3247 Fiat literally sell a 500 that exact colour. And people buy it!

@johnland7318 3 жыл бұрын

I won't show any blood when he crashes

@Thefreakyfreek 3 жыл бұрын

@@johnland7318 and wil remind him how skin is supposed to look after a crash maby a different tint but it gets the point

@WwarGun 3 жыл бұрын

Me in the beginning: "I love DIY engineering!" Me at the end: "Omg so beautiful! This is art."

@KAMiJUINs 3 жыл бұрын

Thank you soooo much :)

@ivargu 3 жыл бұрын

Precisely!

@stacyp4534 3 жыл бұрын

The parts descriptions were awesome. This is a really cool project.

@KAMiJUINs 3 жыл бұрын

Thank you for saying that and watching :)

@contentfanatic 2 жыл бұрын

Could you plss send an elec board to my home I really love these vids. A lot of love and nostalgia energy🤘🏾💯

@charifchaud 3 жыл бұрын

magnifique electric board 2021

@KAMiJUINs 3 жыл бұрын

Merci de m'avoir dit ça :)

@zachphillips3720 3 жыл бұрын

This board was like a Bob Ross painting at points I was like oh no it's ruined only to change my mind a few seconds later

@thor3203 3 жыл бұрын

Wow you really put a great emphasis on design, well done!

@KAMiJUINs 3 жыл бұрын

Thank you for saying that and watching :)

@eBoard3R 3 жыл бұрын

*Lookin forward to the ride video.* I do love a good street wheel board!

@KAMiJUINs 3 жыл бұрын

If the video doesn't have your comment, the video didn't completed lol. Do you know what i mean bro :) Thanks million~

@eBoard3R 3 жыл бұрын

@@KAMiJUINs Haha! 👌🏼🤙🏼✊🏼🖖🏼

@mangokraken 3 жыл бұрын

Links to all your materials? You should do affiliate referral links so we can build one too and you can make a little money off of it.

@KAMiJUINs 3 жыл бұрын

If it was sponsored video, I would have did what you said :) when I have time, I will put the link of the parts in the description box for subscribers. Thanks~

@eksine 3 жыл бұрын

Yeah everybody has these parts laying around

@knowledgebyte 2 жыл бұрын

Great build. Now you need to look at 3D printed parts. MarkForged printers can print carbon and metal parts. The cost of these printers are coming down. Thanks for the excellent build bro. You’re almost a ESK8 Boss-builder. Cute pooch/inspector.

@KAMiJUINs 2 жыл бұрын

Thank you for the info :) I checked and it was a printer I really wanted to have. But it's a little expensive to buy as a hobby. HaHa Thank you for watching~

@nrg_fre 3 жыл бұрын

That Was Amazingly Awesome , So Very Clean , Very Platinum Performance

@KAMiJUINs 3 жыл бұрын

Thank you so much for watching :)

@Hennesii 3 жыл бұрын

Where do you get the parts from ? Ali express ?

@KAMiJUINs 3 жыл бұрын

Google the names of the parts in the video and you'll find out right away. Most of the components were purchased directly from the Trampaboard and the Flipsky homepage.

@Hennesii 3 жыл бұрын

Thank you, very inspirational and well done. I would add a few more black and orange details.. just my personal opinion

@kingesk8 3 жыл бұрын

All your videos are truly a masterpiece an I all ways love watching them

@KAMiJUINs 3 жыл бұрын

Thank you so much for saying that and watching :) mate~

@kingesk8 3 жыл бұрын

No problem your my favorite esk8 KZfaqr

@Audiotorium87 3 жыл бұрын

Blimey ... you now how to keep ups hooked lol looking forward to the test ride 👌🏼

@KAMiJUINs 3 жыл бұрын

Check the video #107 please~

@Audiotorium87 3 жыл бұрын

Haha yes watched straight after, didn’t see the date of release 🤦🏽‍♂️. This is a really good build!

@SimonPass230267 3 жыл бұрын

Great looking board. Real craftsmanship.

@KAMiJUINs 3 жыл бұрын

Thank you so much :) I hope to be a craftsman too.~

@thatAlex1337 3 жыл бұрын

That's soooo cool, I Love it!! Keep up that great work!

@KAMiJUINs 3 жыл бұрын

Thank you so much :)

@ChrisHondaProductions 3 жыл бұрын

What attention to detail! So satisfying to watch this video!!!

@KAMiJUINs 3 жыл бұрын

Thank you for Watching :)

@ChrisHondaProductions 3 жыл бұрын

@@KAMiJUINs your most welcome 🙏

@regismartial67 2 жыл бұрын

J'ai eu beaucoup de plaisir à regarder cette vidéo...merci beaucoup ! C'est vraiment du très bon travail, c'est parfait ! 🦾

@KAMiJUINs 2 жыл бұрын

Merci de le dire et de regarder :)

@3DLA92 3 жыл бұрын

Esse skate ficou demais 👏👏👏👏

@giovannicandelario 3 жыл бұрын

Man looks amazing, Love your work!👍🏻✌🏼

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@nmtkawb 3 жыл бұрын

Awesome build. And also that cable management is dope.

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@jkob_k0452 3 жыл бұрын

wow super clean build- very impressive, keep it up!!!

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@trishaleaver3581 2 жыл бұрын

Wow! Just beautiful! You are an artist.

@KAMiJUINs 2 жыл бұрын

Thanks~

@ednorm6241 3 жыл бұрын

cool stuff dude! i wish someone would do a step by step video! tell you exactly what to buy and show me exactly ho to build one of these suckers

@madeinfonddugarage5988 3 жыл бұрын

as always, i have done a really good job. nice to see this

@KAMiJUINs 3 жыл бұрын

Thank you so much for a long time :)

@eddymunnyz7315 3 жыл бұрын

Doggo just loves hanging out 😁 he's cool. Also, WOW! Cool board! Very Zen ish videos too by the way brother 👍😎😃

@KAMiJUINs 3 жыл бұрын

Thank you so much for saying that and watching :)

@nsr50rst 2 жыл бұрын

The wiring process is beautiful.

@KAMiJUINs 2 жыл бұрын

I also applied what I saw somewhere :) Thank you for watching~

@VllKlNG 3 жыл бұрын

Wow. Incredible workmanship and video editing.

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@planetfeelgood17 3 жыл бұрын

Brilliant! Amazing! Well Done! Very Inspiring! 😊🍀🌟

@KAMiJUINs 3 жыл бұрын

Thank you for saying that and watching :)

@tyshiddejuremanbey1313 3 жыл бұрын

I'm so happy I found you Thank you!!!

@KAMiJUINs 3 жыл бұрын

Thank you for watching too :)

@ujung5683 3 жыл бұрын

정말 나이스하네요~ 아이디어 너무 좋고, 깔끔하고 편한 영상👍🏻오늘도 잘 시청 하고 갑니다. 감사합니다good kami🐶good job

@KAMiJUINs 3 жыл бұрын

정말 감사합니다 :) 항상 까미가 열일 하고 계십니다.ㅋ

@bluescooter84 2 жыл бұрын

Very good craftsmanship.. Mechanical details very good calculated.. Congratulations..

@KAMiJUINs 2 жыл бұрын

Thank you for watching :)

@keithblues1302 3 жыл бұрын

Stunning in every way.

@KAMiJUINs 3 жыл бұрын

Thank you for saying that and watching :)

@nick92065 3 жыл бұрын

That will be one hell of a fire with that lipo.

@hopefullysoonaweldingengineer 3 жыл бұрын

Beautiful. Wish you beautiful ride.👏👏

@KAMiJUINs 3 жыл бұрын

Thanks~ :)

@markrobbins3357 3 жыл бұрын

Awesome job - beautiful board !!!

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@akashnagi2404 3 жыл бұрын

So beautifully done .. great job 🔥

@KAMiJUINs 3 жыл бұрын

Thank you for saying that and watching :)

@roorider 3 жыл бұрын

That is so clean looking, amazing board

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@user-cn9yp8vd6h 3 жыл бұрын

언제나 마감이 깔끔하고 하나의기성품처럼느껴져요! 조만간 런칭하시겠는데욯ㅎ

@KAMiJUINs 3 жыл бұрын

아닌데욯ㅎ :) 시청감사합니다 ~

@ssabsonhe 3 жыл бұрын

커스텀하고 싶은 욕구가 솟구쳐 오른다 ㅠㅠ 좋은 영상 감사합니다!

@KAMiJUINs 3 жыл бұрын

네 시청감사합니다 :)

@Snap123S 3 жыл бұрын

I like that zip tie idea 💡 simple and clean

@KAMiJUINs 3 жыл бұрын

One of my subscribers told me this good way :)

@kousueki7024 3 жыл бұрын

the work of perfectionist

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@k1_alsrl 3 жыл бұрын

새로 만드실때마다 깔끔해지고 빌드퀄리티도 올라가네요! wow!

@KAMiJUINs 3 жыл бұрын

저도 조금 그렇게 생각합니다 ㅋ :) 시청 감사합니다.

@wedazzy26skrd96 3 жыл бұрын

amazing work!!! so cool, thanks for tutorial step-by-step)))

@KAMiJUINs 3 жыл бұрын

No problem and Thank you for watching :)

@tlqkf_toR1 3 жыл бұрын

디자인 감각이 정말 뛰어나시네요 이영상 보고 저도 전동보드 만들기 도전할려고 합니다 ㅎㅎ

@KAMiJUINs 3 жыл бұрын

아 그렇게 보셨나요 감사합니다 ~

@Ram-sc6or 2 жыл бұрын

Music and board both awesome

@KAMiJUINs 2 жыл бұрын

Thank you for watching :)

@All-ChannelTV 3 жыл бұрын

멋져요~👍" 라이딩 영상이 기대됩니다👏👏👏

@KAMiJUINs 3 жыл бұрын

시청감사합니다 :)

@Lesservector 3 жыл бұрын

That cable management was a nice detail

@KAMiJUINs 3 жыл бұрын

That's what I thought when I saw this idea. So I used it here. Thank you for watching :)

@PepinoMichoacan 3 жыл бұрын

That build is clean man ! Congrats

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@fcfc 3 жыл бұрын

Interresting design and very well manufactured.. But tail and nose are unuseable which is essential in town.

@korea-trucker 2 жыл бұрын

영상 잘 봤습니다. 대단하시네요. 👍👍👍

@KAMiJUINs 2 жыл бұрын

시청감사합니다~

@newt2010 2 жыл бұрын

Very nice build. Great job

@KAMiJUINs 2 жыл бұрын

Thank you for watching :)

@user-oo3iw6lx2d Жыл бұрын

영상 쭉 봤는데 진짜 손재주 좋으시고 깔끔하게 작업하시네여

@KAMiJUINs Жыл бұрын

:) 네~ 시청감사합니다!!!

@simonec3511 3 жыл бұрын

This si really a great job!! Well done!!

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@babbagamevers3782 3 жыл бұрын

You bro like for real you should start up a Kickstarter for this beast all my skater homies are crying for one. I would support you and so would all my guys.

@KAMiJUINs 3 жыл бұрын

However, price and delivery are the problems. Also our customs laws will refuse to allow this too :( But Thank you so much for saying :)