10TH GEN CIVIC SI GOES BIG TURBO! (PRL Motorsports Turbo Kit)

10TH GEN CIVIC SI GOES BIG TURBO! (PRL Motorsports Turbo Kit) | GTX2860R - MO POWA BABY!

Рет қаралды 49,750

4 жыл бұрын

Check out the official PhongPack merch site at:
www.PHNGPACK.com
__________________________________________________
So it finally happened, we moved on from the drop-ins and finally joined the Garrett family! Pure Turbos drop-in did me well, but we maxed out the capabilities of it and it was time to move on to something BIGGER! With a Fully Built Engine and Transmission, I'm sure you are all excited to see my finally make the BIG TURBO move. Goal to 500whp, here we come!
__________________________________________________
To see more pics and info on the build, follow my Instagram:
/ phong.vlg
Need 10th Gen work done? Local in Southern California?
Hit up V.C.D Racing for any car work needs! (By Appt. Only)
DM him on Instagram at: / v.c.d.racing
Custom Valve Cover done by Jazmine.
Want one yourself? DM her on Instagram for Inqueries.
(She can do any make/model)
/ babyyjvr_
__________________________________________________
2018 Honda Civic Si Mods:
FBO (Full bolt-ons):
PRL Cobra CAI
PRL Intercooler
PRL Chargepipes
PRL High Flow Catted Downpipe (PRL Turbo Kit)
FKX Racing Catless Frontpipe
ARK Performance DT-S Exhaust
Hondata
Retrofit CTR (Civic Type R) Clutch & Flywheel
Garrett GTX 2860R Gen II (PRL Turbo Kit)
Custom Tuned by Daniel Butler
Fuel: E85
-------
Engine Build (L15B7) Specs:
Pistons: JE Pistons
Rods: Brian Crower Rods
Valve Springs: Brian Crower Valve Springs
Headstuds: ARP Bolts
Sleeves: Darton Sleeves
(Installed by: Race Engine Development)
Engine Builder: Quick N Slick Performance
/ quicknslickperformance
-------
Transmission Specs:
1 - 2 custom Straight Cut gears
HPD 4TH
2020 Final Drive (4.350:1)
Modified CMC
Transmission Builder: Eman
/ k20z3allmotor
__________________________________________________
Music:
The Clock (instrumental) by RYYZN / ryyzn
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/al-the-clock
Music promoted by Audio Library • The Clock (instrumenta...
Riviera by Smith The Mister smiththemister.bandcamp.com
Smith The Mister bit.ly/Smith-The-Mister-YT
Free Download / Stream: bit.ly/al-riviera
Music promoted by Audio Library • Riviera - Smith The Mi...
Over soon by LiQWYD / liqwyd
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/liqwyd-over-soon
Music promoted by Audio Library • Over soon - LiQWYD (No...
__________________________________________________
Got a 10th Gen Civic? or Just want to follow the
XGenz Family? Check out their pages below:
SDxGENZ:
/ sdxgenz
OCxGENZ:
/ ocxgenz_
LAxGENZ:
/ thelaxgenz
IExGENZ:
/ iexgenz
SFxGENZ
/ sfxgenz
SJxGENZ
/ sjxgenz
AZxGENZ:
/ azxgenz
HTxGENZ:
/ htxgenz
CCxGENZ:
/ ccxgenz
GUxGENZ:
/ guxgenz
JPxGENZ:
/ jpxgenz
__________________________________________________
Outro:
GIF BY: www.deviantart.com/valenberg
Song: Lo-Fi Type Beat: Loser Only Club - Walk Into Rain
Video Link: • (FREE) Lo-Fi Type Beat...
Soundcloud: / loser-only-club
__________________________________________________
Thanks for all the awesome support & love! As always family...
Keep Grinding & Stay Humble! Yeadat ~
- Phong.

Пікірлер: 83

@seanlannigan5109 4 жыл бұрын

All that talent in one spot! Surround yourself with the best!! 💪

@dfuzr1370 4 жыл бұрын

Bro I literally watched your entire channel tonight 😂 I hope to pick up an si in a couple of years and vlog like you!! Hella inspiring

@petervang7730 4 жыл бұрын

Was gonna keep my si stock but when I kept watching your videos I pulled the trigger and order full bolt ons for my car so soon ill hope to be fast too. Keep it up brotha!

@Meaty_taco 4 жыл бұрын

Bad ass bro... congratulations bud! Keep the si strong bratha!

@JCgamer04 4 жыл бұрын

Nice man I remember watching your first video I ever saw and you were the reason I bought my si one day I hope to have a built like yours.

@driveri1435 4 жыл бұрын

Damn Phong you are really back with a vengeance. I will stick with my Mitsubishi drop-in turbo for now 😂😂😂🙌

@Mednight5787 4 жыл бұрын

you’re car is insane. This what I imagine mines to come out

@JustCallMeDope 4 жыл бұрын

Looking forward to seeing some runs in the future! 🔥

@mrdudelove1 4 жыл бұрын

This bad boy looks awesome😎😎😎

@cheenoulee7455 4 жыл бұрын

Can’t wait to see more of what’s to come! My 2020 Si is currently waiting on a cat less dp and intercooler then I’m fbo. Far from you, but I’ll get there. Keep it up, you’re my inspiration!

@FivexxXxx5 4 жыл бұрын

I said it before but imma say it again.... That is my fav civic build

@PRLMotorsports 3 жыл бұрын

Look good, brother!

@d0mochi 2 жыл бұрын

I am now the owner of this kit. I’m installing it right now just ordering misc hardware as I go.

@balancemode4112 4 жыл бұрын

All love for you❤️❤️

@XuniqueLyEm0x Жыл бұрын

This definitely wants to make me do this to mine for sure!!!

@HookinBasstv 4 жыл бұрын

Ur car is fire

@cordellingram808 2 жыл бұрын

My weekend/track toy is a h23a swapped Supercharged/methanol Prelude. Been incredibly reliable for me touring. These small displacement motors scare me when thinking about adding a newer honda to the garage. (1.5L's specifically)

@jovicmaquiran3471 4 жыл бұрын

fire!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@teajae8809 3 жыл бұрын

DOPE!!!

@ProdByAce 3 жыл бұрын

that spool is wettt. & whats the song in the beginning when u were removing the pure??? shits dope

@ChariotFighter 3 жыл бұрын

Lmao “I’ve already cracked the housing so we are done with drop-ins” bro quit pushing that 1.5 so hard. 500WHP is cool if you have a grip of motors and transmissions on deck. But our cars are too brittle for it and that’s why you keep breaking your whip. All jokes aside, this is gonna be dirt nasty when you finally finish her up. 🔥🔥🔥🔥

@mexicanloster225 2 жыл бұрын

MOOREEE POWA BABBEEE YEAAAAAAAH

@chrisasaurus 3 жыл бұрын

Any tips or thoughts on going big turbo and fully stock currently just have ktuner , intake dp fp.. should I add flex fuel right of the bat ?

@charlestx2x44 4 жыл бұрын

You going to let us know what numbers you made on the drop in turbo?

@jessecontreras2051 11 ай бұрын

Im planning on buying this kit on the fb market place but is there any videos on installing this or is it basically like a drop in ?

@Sh4kuRxThuG Жыл бұрын

HELLO, THIS TURBO SYSTEM, how did it work after years, what problems did it give you?

@thetoneezyp 4 жыл бұрын

🔥🥵🔥🥵🔥🥵🔥🥵🔥

@izsaklink6252 4 жыл бұрын

what turbo should i put in my 2020 civic sport?

@orcahang21 2 жыл бұрын

Good 👍 ASS job Brudda ✌

@cameronsannicolas475 4 жыл бұрын

Hey what’s going on bro? Watched some of your content pretty dope! I actually own a 2019 type r and I’ve had it for about a year now and have no regrets💯 I want to tune it and put a bigger turbo and my knowledge is somewhat good but you seem to know a lot so was wondering if we could maybe link up. I’m from La County

@jaysonmalong1228 Жыл бұрын

Cant find prl turbo kits now for my 2017 coupe si. Any idea where to buy a prl turbo kit?ty

@jaysonmalong1228 3 жыл бұрын

Hi,is it alright to just have a prl short ram intake with that prl big turbo?

@jackx429 3 жыл бұрын

considered the aftermarket fuel rail system?

@kier4134 3 жыл бұрын

I have an ExL. Will it be too much work to add a turbo to It?

@vuhong5617 3 жыл бұрын

Is that engine block all stock or tou have it rebuild

@saengtawanspurr8801 3 жыл бұрын

using torque wrench to take off bolts?

@shafiqahad24 3 жыл бұрын

So I can put this on my 1.5t accord?

@Max_ellis74 3 жыл бұрын

Can you hear the turbo when your going down the street. Spools like a diesel truck

@trumpsteaks1401 4 жыл бұрын

As always: Guys: How do I get more power from a car. Expert: well, you should firs... Honda Guys:* BOOOOOOOOOOOOOOOOOSSSTTTT *

@luponero8518 3 жыл бұрын

How do I order the turbo big for the Honda civic Si?

@alexbarn3841 3 жыл бұрын

Well to be fair, this is a built engine, transmission and full bolt on, there's not much more you can do besides turbski upgrades lol

@Max_ellis74 2 жыл бұрын

Does it whistle?

@mrbriceno3949 Жыл бұрын

What’s so bad about a drop in, I’d like a slightly bigger turbo on my 10th gen sport hatch

@darkknight097 4 жыл бұрын

Should've went with the 2867 first if 500whp was the goal. The 2860 with the .64A/R flow capability is maxed out around 450whp. Trying to squeeze anything more and you'll be way out that turbos efficiency range and will be putting a lot more stress on it than it's designed to handle. Well either way, looking forward to the dyno numbers. Edit: wording.

@PhongVLG 4 жыл бұрын

I appreciate the insight, but the reason we made the move to the 2860 instead of the 2867 was due to its spool efficiency. The 2860 even if rated at 450whp is not far off to 500whp. The end goal will be 500whp, but as said in the video.. we may change up set-ups in the future. So far at this moment we are switching over to Garrett or PRL Turbo Kit due to us maxing out in the drop-in’s stock housing. Now keep in mind us switching doesn’t mean we will still gain more power, I’m sure the Garrett may not hit the amount of power I obtained on the PureTurbos due to fuel limitations, but that is just another barrier we will soon overcome as we proceed with the build! 👊🏼💯

@r.a.k5111 5 ай бұрын

can this be done on a CVT?

@MariDiGennahVLOGS 2 жыл бұрын

How much can this engine handle?

@yassergonzalez8014 2 жыл бұрын

What’s the name of the turbo I wanna upgrade mine cause I’m already FBO

@ronnyliriano7297 3 жыл бұрын

Civic ExT i want more powwaaaaaa. Cant do something as expensive as a turbo kit right now tho. Any other options ?

@vivix8578 3 жыл бұрын

full bolt ons

@TomisaLami 3 жыл бұрын

i got a ex will a turbo upgrade be ok on that motor?

@LuisMorales-bl4bz 4 жыл бұрын

I’m looking for a reliable clutch and flywheel setup for my Si. What is your clutch because I am also building my Si. Good luck and love the whole set up brother keep it up

@PhongVLG 4 жыл бұрын

Thanks for the love brotha! 🤙🏼💯 Also I have the Type R retrofit clutch and flywheel combo, made by instagram.com/k20z3allmotor/ on Instagram. He also has a link to his website on it: www.naperformanceftw.com/ctr-clutch-retro/10thgen-si-hatchback-clutch-and-flywheel-kit Here you Go brotha 🤙🏼💯

@LuisMorales-bl4bz 4 жыл бұрын

PhongVLG I appreciate it a lot. Good luck on the build. Looking mad clean.

@jtorres2365 4 жыл бұрын

Looks dope AF ... question what material did you used to make the defuser ???

@PhongVLG 4 жыл бұрын

Thanks brotha! 🤙🏼 The material is ABS Plastic.

@jtorres2365 4 жыл бұрын

Thanks bro I’ll check it out trying to make one for my accord CP2

@itsjustjosh8209 4 жыл бұрын

Quick question, I have a fc3 myself and I’m thinking about building the engine, what do you think a built engine can handle up wise? I seen in a mother comment 500 hp is not even close to what it can handle.

@PhongVLG 4 жыл бұрын

My built block is rated to about 800hp, but anything can always happened even with a built block if tuned wrong or such, but yes building the block would be safer than running a stock block.

@jaybautista6673 3 жыл бұрын

Did your engine blow?

@jordanle8691 3 жыл бұрын

do you know if you can run the PRL big turbo kit with an intercooler which isn’t PRL? I’m planning on running 27won intercooler but might want the PRL turbo kit down the line

@PhongVLG 3 жыл бұрын

You would ideally need everything PRL for the correct fit, all the components with the kit are meant to fit all PRL. So unfortunately the 27won wouldn’t be ideal to get, you possible can fit it by forcing the fitment, but it wouldn’t be ideal.

@LynnDisclose Жыл бұрын

How much is it that turbo?

@jaysonmalong1228 2 жыл бұрын

Downpipe- catless or catted? Turbo option- Garrett gtx2860 rgen2 Turbine Housing- .64 or .86 housing? Intake option- Race or Street Maf?

@PhongVLG 2 жыл бұрын

Catless Downpipe GTX2860R Gen 2 .64 housing Street Maf

@jaysonmalong1228 2 жыл бұрын

@@PhongVLG how about your frontpipe?is it stock or u bought an upgrade frontpipe like PrL?thank u

@bjornsama9649 3 жыл бұрын

All that money into that 1.5t. Why didn't you just get a Type R? More potential.

@PhongVLG 3 жыл бұрын

In short, I never planned to mod my Si like this. It just happened haha 😅 But honestly even if I went back in time, I’d still do it all over again. The Si is the underdog and is underrated compared to its older brother the Type R, So I’d rather show people that the Si has the same opportunity and potential to be something better than what it is. Also fun fact: Current Faster 10th gen Si is pushing over 700+ whp.

@cali_cal 4 жыл бұрын

manual conversion next

@PhongVLG 4 жыл бұрын

Si’s only come in manual.

@ChikoPikafull 4 жыл бұрын

Anyone know what happen to Vader si?

@PhongVLG 4 жыл бұрын

He deleted his account as the social media life wasn’t his route, he’s just moved on to shifting passions.

@wickedsatan1 4 жыл бұрын

Interested in selling pure turbos?

@PhongVLG 4 жыл бұрын

Not for sale, sorry brotha 🤙🏼💯

@vincentwhite9603 4 жыл бұрын

Save up for another engine lmao

@PhongVLG 4 жыл бұрын

No need. The car already has a built engine and built trans, so we can definitely go ahead and beat on her 😂 For sure won’t make near enough power for what the built engine is rated at.

@mrdudelove1 4 жыл бұрын

If you only know.....🤣

@jzila9900 4 жыл бұрын

Go watch all his previous videos ,and you'll see why .Your talking to the first few people that has gone thru trial and errors with the lb15 engine

@Bbc418 Жыл бұрын

Type R’s are ugly, glad you got the better looking SI!!

@sean3473 3 жыл бұрын

" i wanted a type-R but i couldn't afford it" *spends thousands modding an si that could have been spent on Type-R* (just messin, i drive an Si myself)

@datwhinyfa5267 4 жыл бұрын

Go meth my boy has 2867 runnng meth made around 410/346and 362/335 with no meth

@PhongVLG 4 жыл бұрын

Meth injection is the route I will be avoiding as meth injection is very corrosive. But it’s a nice route of course to increase power quick, but there’s better routes and the 2860R is more spool efficient than the 2867R. That’s why I stuck with this set-up, I can still produce up to 450hp - 500hp on it.