No video
BIG TURBO (10TH GEN) 2018 HONDA CIVIC SI DYNO DAY! | HOW MUCH WHP?!
Рет қаралды 37,389
Күн бұрынCheck out the official PhongPack merch site at:
www.PHNGPACK.com
__________________________________________________
In the last video we installed the PRL Big Turbo Kit! Replacing our Pure Turbos drop-in and moving up to a Garrett GTX 2860R Gen II. We finally got the time to meet with my tuner Daniel Butler to get the Civic Si officially Dyno Tuned once again! Making sure all the tuning is dialed in and ready for us to take on the streets once again! This is our milestone for now until we proceed to the next step which is more fuel! (fuel system upgrade), which is planned for the future! So far satisfied with the results! Hope you enjoy family!~
My Tuner: / d_butl3r
__________________________________________________
To see more pics and info on the build, follow my Instagram:
/ phong.vlg
Need 10th Gen work done? Local in Southern California?
Hit up V.C.D Racing for any car work needs! (By Appt. Only)
DM him on Instagram at: / v.c.d.racing
Custom Valve Cover done by Jazmine.
Want one yourself? DM her on Instagram for Inqueries.
(She can do any make/model)
/ babyyjvr_
__________________________________________________
2018 Honda Civic Si Mods:
FBO (Full bolt-ons):
PRL Cobra CAI
PRL Intercooler
PRL Chargepipes
PRL High Flow Catted Downpipe (PRL Turbo Kit)
FKX Racing Catless Frontpipe
ARK Performance DT-S Exhaust
Hondata
Retrofit CTR (Civic Type R) Clutch & Flywheel
Garrett GTX 2860R Gen II (PRL Turbo Kit)
Custom Tuned by Daniel Butler
Fuel: E85
-------
Engine Build (L15B7) Specs:
Pistons: JE Pistons
Rods: Brian Crower Rods
Valve Springs: Brian Crower Valve Springs
Headstuds: ARP Bolts
Sleeves: Darton Sleeves
(Installed by: Race Engine Development)
Engine Builder: Quick N Slick Performance
/ quicknslickperformance
-------
Transmission Specs:
1 - 2 custom Straight Cut gears
HPD 4TH
2020 Final Drive (4.350:1)
Modified CMC
Transmission Builder: Eman
/ k20z3allmotor
__________________________________________________
Music: NEFFEX - Mirror
Provided by Copyright Free Trap:
• NEFFEX - Mirror [Copyr...
♫Neffex♫
» Spotify: bit.ly/NEFFEX_S...
» SoundCloud: bit.ly/NEFFEX_SC
» Facebook: bit.ly/NEFFEX_FB
» Instagram: bit.ly/NEFFEX_I...
» Twitter: bit.ly/NEFFEX_T...
» KZfaq: bit.ly/NEFFEX_Y...
__________________________________________________
Got a 10th Gen Civic? or Just want to follow the
XGenz Family? Check out their pages below:
SDxGENZ:
/ sdxgenz
OCxGENZ:
/ ocxgenz_
LAxGENZ:
/ thelaxgenz
IExGENZ:
/ iexgenz
SFxGENZ
/ sfxgenz
SJxGENZ
/ sjxgenz
AZxGENZ:
/ azxgenz
HTxGENZ:
/ htxgenz
CCxGENZ:
/ ccxgenz
GUxGENZ:
/ guxgenz
JPxGENZ:
/ jpxgenz
__________________________________________________
Outro:
GIF BY: www.deviantart...
Song: Lo-Fi Type Beat: Loser Only Club - Walk Into Rain
Video Link: • (FREE) Lo-Fi Type Beat...
Soundcloud: / loser-only-club
__________________________________________________
Thanks for all the awesome support & love! As always family...
Keep Grinding & Stay Humble! Yeadat ~
- Phong.
@LlLnig 4 жыл бұрын
These tiny new 1.5 honda earth dream motors are impressive. They make good torque.
@bryanrojas7993 4 жыл бұрын
You have one of the best sounding si’s out there now my dude! I just got my dt-s ark exhaust too !
@charleswaite930 3 жыл бұрын
Is there drone in the cabin? I couldn't deal with the drone of my HKS Hi-Power and sold it. Happy with just DP/FP for now but I'm always looking for an exhaust that will be a little louder/deeper without the drone.
@duanebailey6253 3 жыл бұрын
@@charleswaite930 build a custom one with 2 resonators and a non performance muffler.
@derekyien3765 4 жыл бұрын
Seems like a solid build. Nice sound from engine too.
@austinmuldoon9369 Жыл бұрын
I bought my fc3 because this build. Thanks Ryan, for pushing the limits of this platform and advancing the knowledge of the community and having fun along the way. Miss the vids, hope the Supra is treating you well.
@petervang7730 4 жыл бұрын
just watching your vlog makes me wanna keep adding to my car too. was just gonna do bolt-ons but its really, really tempting to buy more stuff. you should do a couple videos of racing all types of cars from muscle to import and all them dream cars.Great Stuff man. Keep doing what you do!
@geoffkn17 4 жыл бұрын
Just bought my 2016 Civic EXT...love your channel! Tuned my 1989 Prelude SI in high school so going back to my ROOTS!
@pedrotespinal117 4 жыл бұрын
What have u done to the 2016 ext?
@shaunchristensen4386 4 жыл бұрын
So sick brother!! Awesome video as always!! I owned a 2017 civic Si and I loved it!! Mine was stock so it was nothin close to yours!! I bought a 2019 Type R a year ago and it’s been a blast too!! Keep up the incredible work and God bless!!
@alainarevalo724 4 жыл бұрын
Started from the bottom now we here! Love your build bro! Keep it up!!
@Cmobley_ 5 ай бұрын
You can add a port injection system in addition to the di already there for more fuel. It also solves any carbon buildup on the valves.
@xtrmbrazen6153 4 жыл бұрын
That's awesome i got a ways to go to catch up to lol super nice and clean man. Can't wait for the next upgrade. Keep em rolling, rubber side down, shiny side up lol
@gausswalker 4 жыл бұрын
7:16 he shut the hood like he dropped a mic 😂
@Joel-mastrapa 2 жыл бұрын
i just got my 2018 si 2 weeks ago i love the thing trying to weed through all the people talking about the oil dilution so i got warranty any ways im not too worried, overall the car is bone stock and you can still have alot of fun with it.. crazy to see you got 350whp thats insane out of a 1.5 tbh. love the video!
@KennyGoskesen 4 жыл бұрын
Loving the build. Man, you are killing it. Great numbers 👏
@nothanks9795 4 жыл бұрын
Great numbers! Love the build and your constant positive outlook!!
@letd1995 4 жыл бұрын
lmfaoo you got so excited to sign his dashboard for a second 😂😂
@braiton9564 4 жыл бұрын
Hell ya dawg. Long time coming. I’m sure this is a great feeling after all of the mishaps!
@coybuilt 4 жыл бұрын
Dude can't wait to see the car in person and get that run
@rootsmanuva82 3 жыл бұрын
I’ve always assumed a small 1.5L turbo would always be too small for a 2,900 lb sedan/coupe. MINI Cooper S/JCW has a 2.0 liter in a 2,700 lb hatchback, GTI has a 2.0L and weighs around 3,200 lbs. Well I was wrong. The little 1.5 CAN be turned into a giant killer after all!
@chrisvigo4880 4 жыл бұрын
Thats dope! Love your chanel and content bro!!
@gr6395 4 жыл бұрын
Congrats!!! Those are some solid numbers for a 1.5t! All in all, how much would you say the engine build/tranny cost? Also, it would be sick AF.. if you could do a video at a drag strip, race track, or even time attack event!
@PhongVLG 4 жыл бұрын
I’ll make a video break-down in the future describing how much I’ve spent, also I do plan on taking her to the drag/track later. So stay tuned!
@bad07dmax 3 жыл бұрын
Nice build. That clamp tho. 9:06
@teajae8809 4 жыл бұрын
GANGSTA! Those R Accord numbers! I'm sure it feels like a brand new setup. ENJOY. Can't wait to see what U do with the fuel upgrade.
@Q60jay 4 жыл бұрын
Sick ass build man I used to have a 1.5t hatch just like kevsters but I had to upgrade I just didn’t have the same potential with that cvt . Let’s get some runs in for your channel bro 🤟🏼
@PhongVLG 4 жыл бұрын
Always down brotha 🤙🏼 much love!
@Q60jay 4 жыл бұрын
PhongVLG we can set something up man I stay in the I.E
@PhongVLG 4 жыл бұрын
Cocaine Q60 DM me on Instagram 💪🏼💯
@ghostperformance801 4 жыл бұрын
I love my FK7 trying to build mine to love the vids bro keep them up
@joepurtle6344 4 жыл бұрын
Can't wait to get my 2020 si and start building great build bro 💪
@austinmuldoon9369 4 жыл бұрын
Same here man! I’m about to pick mine up next weekend 😎
@rstuff1605 4 жыл бұрын
You guys should get a 2006 to 2015 si. Trust me, nothin against the 1.5 t but the 2.0 & 2.4 will have more low end torque, thats why v8 make good power but do go to the gas station more often. But this is a 4 cylinder so it shouldn't be to bad, you know. Have your cake and eat it 2 haha
@qwerty.us412 4 жыл бұрын
ice scoop only reason I didn’t go for a 9th gen si is because in my area they were going for a lot. I would see 2015 si for 20k when the 10th si (2020) I bought came out to 27k although I do perfer the kseries, a brand new car for a bit more money was the better option 👍
@rstuff1605 4 жыл бұрын
@@qwerty.us412 shoo. 27 for a civic, didnt ever think a civic would go for that much. I would then just get a basic 2 liter with 155 hp and add boost if i wanted to but do my research 1st of course ha.
@rstuff1605 4 жыл бұрын
Id probably go for an Accord coupe or sedan if need space for deliveries etc. With the J35 278 hp and 6 speed manual unless the auto shifts ok and you know how to put the good stuff in it ha.
@Tzar___ 4 жыл бұрын
Please make a video about how much it cost im really really thinking of getting a civic
@PhongVLG 4 жыл бұрын
I’ll work on that next for an upcoming video, thanks for the suggestion!
@rstuff1605 4 жыл бұрын
I have one too. I just put a k&n breather filter with 126 thousand miles. Just put E-15 to that wawa 89 from 3 weeks ago So i have 3 wk. Old diluted wawa METH 89 that cleaned out gunk from a fail R&D WITH E 15 lol. Powers good in the J35 but wonder how it'll perform in economy and response & lag. This is my new R&D
@clintpopham5691 4 жыл бұрын
Oof putting my Type R red badges on your SI's... I wouldn't even let my wife upbadge her SI.. ratty thing to do.
@XeroFailGames 4 жыл бұрын
@Mikie Jones dont feed the clowns..I mean trolls
@markgaudreau8053 4 жыл бұрын
i have a civic , i would love a cost breakdown as well
@davyncruz1774 4 жыл бұрын
Such a fun power level with some R888 😍😍🔥
@_GRVR 4 жыл бұрын
I love my 19 Si sedan, im going to love it sooo much more when I get into the mods like yours, did you get your valve cover powdercoated?
@mohammadmalik8157 3 жыл бұрын
When my friends ask me to do drugs 9:42
@jrperformance7857 2 жыл бұрын
Run a flex fuel system on your civic, that always suits many street/track turbo builds 💯. Love your build, I might get a 2018 Honda civic si.
@jmblaze 4 жыл бұрын
Amazing numbers!!
@danielherrera7618 4 жыл бұрын
Great build bro
@billh1355 3 жыл бұрын
You can do water/meth injection which removes the corrosive properties of the concentrated methanol but still get a good jump in power
@TTorres1183 4 жыл бұрын
Great video!!
@pidro46 3 жыл бұрын
#InjenTechnology baby in the intake.
@doritogoat 4 жыл бұрын
just bought a 2019 si, was regretting it until I seen your numbers and parts, clean bro0o!
@xscx888 4 жыл бұрын
Damn Phong you trying to blow another engine jk jk fingers crossed, wildest SI in the game!!
@amazachvlogs9664 4 жыл бұрын
Awesome car. Love your build. I have a 19 Si as well but 100% stock. Great cars. Question for you. Why wouldn't you get a Type R instead of modifying the Si. 100 more HP. I love your passion for this Si.
@PhongVLG 4 жыл бұрын
Thanks for the love brotha 🤙🏼💯 The Si wasn’t a project I expected to take so deeply, but it happened. As for the horsepower, what the Dyno reads is power to the wheels. So of the box the Civic Si makes 205hp to the “crack” which is about 175 hp to the “wheels”. We dyno’d at 350 hp to the “wheels” if you wanted to calculate crank hp, that 350 to the wheels is more like 400 horsepower to the crank. So it’s made over double the horsepower than stock in reality. As for the Type R, they make 305 hp to the “crank” out the box, which is about 267 hp to the “wheels” . Also with this turbo, it’s not always about the numbers but also about the power curve, understanding when the power comes in. To give better insight, this set-up has already gapped stock Type R’s and even gave bolt-on tuned Type R’s a struggle. The numbers you see aren’t how it is on the streets 💪🏼💯 But I also wanted to share what these 1.5L platforms are capable of, that’s why I didn’t get an R.
@6.4inAz 4 жыл бұрын
Would love your mod lost 2017 here
@rwelsher1911 3 жыл бұрын
@@PhongVLG someone in my town has a Type R making 600 to the wheels. The Si is def nice, my WRX caught fire after hitting a deer so it’s most likely my next whip bc of affordability, but they’re slow. Just sayin if you could afford a Type R and build it, it’d leave the Si in the dust. I think it’s a good affordable daily driver with lots of creature comforts but it doesn’t want smoke with most sports cars. I’m going to miss my WRX 😭
@PhongVLG 3 жыл бұрын
@@rwelsher1911 I’m sorry to hear about your WRX brotha, it’s unfortunate but you can always get another one in the future! As for the Type R yeah it’s pretty excellent when modified too, but I wouldn’t cut the Si short, you’d be surprised what capabilities this car actually has. Numbers are one thing, but don’t forget the Si’s are also lighter. Here’s one of my latest videos that showcases a few runs with this car against some worthy adversaries (including a modified Type R) 😉 Maybe this will inspire you more on the Si: kzfaq.info/get/bejne/hZ2Vm5uc376so6M.html
@bobbyherdman243 4 жыл бұрын
And your car sounds DIRTY good lord.
@Meaty_taco 4 жыл бұрын
Congratulation bratha!!!! How much psi you pushing now with the new maf sensor?
@PhongVLG 4 жыл бұрын
Currently only running 29 psi, but the 4bar sensors are for the future when we will push more.
@tamarindoreo 3 жыл бұрын
NICE BUILT! What turbo do you have?
@irineoromerojr5897 4 жыл бұрын
Officially made me a subscriber
@braydenbrooks1009 4 жыл бұрын
Nice numbers! I heard it’s not safe to run our stock motor over 300wheel torque, are you built at all?
@PhongVLG 4 жыл бұрын
Yes I always advise people to stay under 300hp if you’re on stock internals. Also Yes, Built Engine & Built Transmission, you can find videos of it on my channel. I document most of my build!
@z32ghost 4 жыл бұрын
Broo i got a 19 Si... just looking at all thr stuff uv got i kno uv spent mad bread getting those 350hp
@PhongVLG 4 жыл бұрын
I made more on the drop-in turbo, but that was on Full E85. This turbo is bigger which utilized more fuel, so we can’t unlock the full potential just yet until we upgrade the fuel system. She’s only on E30, if she was on Full E we would push 450-500hp!
@z32ghost 4 жыл бұрын
@@PhongVLG yea bro i kno ur journey with the Si iv seen all ur vids for insight . So far i got the prl intake race maf and the ktuner with the 24lb boost tune on the ktuner, im thinking about the E85 prl kit next or the frontpipe downpipe and exhaust... keep up the great video bro uv helped me soo much with our cars... from miami i salute and thank u 🙏🙏💯
@bobbyherdman243 4 жыл бұрын
Those sparcos are so fresh. I have a 2020 si. I want new seats I’m 6’4 and 240lb. I don’t think I can go after market lol
@julianvillegas7309 3 жыл бұрын
Imagine if the PCM was locked lol
@irineoromerojr5897 4 жыл бұрын
What are the list of parts you had to get this much power very impressed..sick car
@TheButcherGaming_ 2 жыл бұрын
Sheeeeesh
@trumpsteaks1401 4 жыл бұрын
Any ideas as to what set of injectors and pump you wanna run, i would think just run more fuel.
@10thgencivicsihonda27 4 жыл бұрын
Greats videos bro about ur Si bro i feel really happy for u tht u doing tht with ur si
@10thgencivicsihonda27 4 жыл бұрын
Would like to know bro the brand of the hole build transmision would love to get the same as u bro i am bro the east c boston mass lmk when can i get all of tht please
@brandonmartinez8147 4 жыл бұрын
Im saving to trade my 10th gen Si for the Fk8. I hope to get it soon so i can start my next project! The coupe is just too small :/
@myxalplyx 4 жыл бұрын
Great video! Thanks for posting up. Your body has a nice hood btw.. Like the vents. Will you be getting any 1/4 mile numbers and trap speeds on your street tires?
@jok3yjesu339 2 жыл бұрын
Honestly for the money you spent i would have put a type r engine in it
@markgaudreau8053 4 жыл бұрын
decent results
@chrisasaurus 3 жыл бұрын
Thoughts drop in turbo 27won etc vs big turbo... stock motor currently 5k miles goal is 300
@Sh4kuRxThuG Жыл бұрын
Hello friend, I need your help, how many hp did your car have? be sincere. second question friend, why did prl stop selling the turbo kit? was it failing? Did the engines roar? Help me
@irineoromerojr5897 4 жыл бұрын
Also how exactly do you go about calculating how much E fuel to put?
@balancemode4112 4 жыл бұрын
Loveee❤️❤️
@jordynhixson655 4 жыл бұрын
Its not even fair watching these videos because I don't even have the money to do things like this lmao
@NEO_Trojanmuldrop4 3 жыл бұрын
Yes you do you just gotta believe
@jralphroman 4 жыл бұрын
How cute a little Earth dream motor barely pushing 300 horsepower
@lennysamatulski2930 3 жыл бұрын
Hey man so i have a question ive been wanting to big turbo my si for a while but still up in the air with what tutbo kit to go for i have PRL Cobra CaI PRL intercooler and charge pipes PRl DP/FP Catless Hondata flash Greddy Exhaust I want to atleast be around 320 whp , but ik i need lots more work if u can throw some input that would be much appreciated!!
@LoXHumaN 4 жыл бұрын
If you’re in SoCal and interested in running my e85 GTi lmk. We can make a trip to Mexico
@PhongVLG 4 жыл бұрын
DM me on Instagram 🤙🏼💯
@bobcar1972 3 жыл бұрын
So jealous 😭 this car is automatic only in my country
@artgonzalez9706 4 жыл бұрын
i own 2017 SI its nice after seen all those bolt ons it only gives 350 hp how much did you spend and thats not including suspension brakes i'll keep mine simple nice vid by the way
@NEO_Trojanmuldrop4 3 жыл бұрын
350 on a 2800 pound car is pretty quick bro lol, no need for more than that as you’re gonna spin like a mother. 350 is like the max good hp numbers for a fwd once you pass thay you’re on ice all the time lol
@kaleidoscope8914 4 жыл бұрын
around how much was the price to build the motor?
@K20marc 4 жыл бұрын
Baller
@jessehernandez8629 4 жыл бұрын
Vca built nwice man!
@carguy... 3 жыл бұрын
Not trying to start anything just want to understand more, I'm coming from a 2017 roush charged Mustang and trying to see why people like imports so much with such small wimpy sounding cars don't understand the appeal I guess compared to having a big V8 sounding muscle car and more power I don't get why people buy these and they sound so weak when on the road. I'm over 650rwhp with just a basic stage 2 kit on 93 fuel.
@PhongVLG 3 жыл бұрын
I understand where you are coming from, trust me I’d love a beautiful sounding V8 apart of my collection (which will happen in the near future) but even with imported cars there’s a sense of satisfaction to it especially this car being an underdog and not looked at to be all that fast. Granted 350whp isn’t all that fast compared to your 650whp mustang, but on the streets for what it runs into, it actually surprises a lot of cars. I enjoy the satisfaction of the turbo noises and the exhaust tone isn’t bad at all either, not rasp but just a nice bass tone. I’m also sure I can vouch and say that not everyone can afford the most high end of cars, but we build it to make it enjoyable and hopefully comparable. But honestly I can go on a whole list why there are different view points, just as an exotic owner would ask why you would purchase a V8 instead of just getting a Lamborghini, etc. which I’m sure you have your view points of course. In the end that’s what makes the car community awesome is that there is a whole collection of different and unique builds and everyone has a certain taste, I for one love to have a collection of all different type of cars. I see all aspects of why a V8 Mustang can be appealing the same way I see an Inline-6 RB26 Nissan GTR or 2jz Supra appealing. They all have something to offer that’s different and unique! Just like this Civic. Soon we’ll hit 500whp on this platform (all that’s needed is an upgraded fuel system) and that’ll be the end for this project. I do see a C7 Z06 in my future as one of the next 😉
@carguy... 3 жыл бұрын
@@PhongVLG makes sense, thanks for the well thought out reply and for helping me understand more!!!
@kjenks7161 3 жыл бұрын
@@carguy... it’s also due to the fact a lot of people like myself live in the Midwest and need something that can be driven all year long. Not everyone is made of money and can have multiple cars.
@crubio94cr 4 жыл бұрын
I bet it’s still under warranty
@xDannyJay 4 жыл бұрын
dope bro
@michaelwilliams3413 4 жыл бұрын
Finally
@Jsiano91 3 жыл бұрын
Have you ever thought of get better cams or slight higher Compression? Stiffer valve springs?
@PhongVLG 3 жыл бұрын
Car has upgraded valve springs already & upgraded cams have yet to be released for this car.
@Jsiano91 3 жыл бұрын
@@PhongVLG Oof. Higher compression?
@parkerball7174 4 жыл бұрын
Where did you get your splitter rods?
@jogonz5833 3 жыл бұрын
5:12 compare 5:25 rear seats?
@sdez2721 3 жыл бұрын
How much money you think it will take for me to hit the 300hp club? I have a 2017 si sedan like you. Also would i have to build the motor ? 300hp wont handle the stock block?
@PhongVLG 3 жыл бұрын
So you can definitely make 300hp pretty easy and on the stock turbo. Going FBO (Full Bolt-ons) that’s: Intake, Exhaust, Intercooler + Chargepipes, Downpipe & Frontpipe. And then an E85 flex fuel kit and run an E85 fuel tune and can easily produce 300hp. If you want to be “safer” hence the word safer, on the stock block. You’ll want to keep the torque down, torque is what will shoot rods. So producing high torque will also increase the chance of a blown engine.
@bloopers3848 4 жыл бұрын
phong im from norcal i want to be like your build .. i have the same si 2018...
@weayew009 2 жыл бұрын
bro may i know, u have strengthen Engine part????
@pappydac9428 4 жыл бұрын
Not hating here, but why not just but a type r and do some minor tuning?
@PhongVLG 4 жыл бұрын
The plan wasn’t to go so deep into the Si, but it happened. I’ve kind of stuck with the platform due to it being the underdog platform and wanted to show people what these little 1.5L are capable of. Someone has to do it 🤷♂️
@mrdudelove1 4 жыл бұрын
Tip of the day kids Dont do meth Its very corrosive😎
@blakewilson3062 Жыл бұрын
What turbo are you running ?
@dweez916m3 4 жыл бұрын
What’s your plan for smog?
@jclc4201 3 жыл бұрын
Can I ask where is this shop located? New sub here. Tybm.
@emmanuelsantacruz912 5 ай бұрын
How you paint the valve cover ?
@chrisasaurus 4 жыл бұрын
What size are stock injectors ?
@yman898 3 жыл бұрын
How much does it cost u for all the modifications?
@d0mochi 4 жыл бұрын
Yeah don’t do meth bro. Very corrosive for your teeth 😂 jk man. These are some solid numbers. I’m on the pure turbo on my 6mt sport hatch but I’m not flex fuel tuned yet
@taylork057 4 жыл бұрын
Easy... port injection with a motec. I have it on my type r, really easy.
@wild_goose_0285 3 жыл бұрын
*filmed in mexico* We all know what that means.
@morbidfuckingangel5472 4 жыл бұрын
How much to get my 2017 si 4dr like that?
@supertien832 3 жыл бұрын
Ready for 500 wheel? 350 will get old.
@ImageofGodislife 3 жыл бұрын
How much did it cost to build this beauty?
@PhongVLG 3 жыл бұрын
Made a video for that 😉 check it out here: kzfaq.info/get/bejne/jtGioMyZqbK6mXk.html
@Scottstunts 4 жыл бұрын
Ditch the music on the WOT run.
@pedrotespinal117 4 жыл бұрын
Can u give me links on where to purchase's?
@Kaido1299 4 жыл бұрын
So when’s the motec comming so u can run port injection and hit that 500whp
@PhongVLG 4 жыл бұрын
Won’t be running MoTec, it isn’t necessary. I can still run port with Hondata.
@jesusfuenmayor7260 3 жыл бұрын
Money numbers?
@Mr.Thermistor7228 4 жыл бұрын
Yo is that church tuning in LA?
@yiyiy7opopopop818 3 жыл бұрын
What’s the 0-60 time ?
@dfuzr1370 4 жыл бұрын
I don’t see any 2020 si on dealerships.... where do I get one?
@jamest7485 4 жыл бұрын
I just got mine and I had to buy it while it was in transport to the dealership. According the to dealer, inventory has been a struggle due to Covid shutting the factory down for a while.
@brandonmcneely2426 3 жыл бұрын
Stock intercooler too?
@PhongVLG 3 жыл бұрын
No, PRL Intercooler. Full mod list in the video description.
@kongchangher7148 4 жыл бұрын
can you run big turbo on stock internals>?
@darkknight097 4 жыл бұрын
Yes
@ItsJustin177 4 жыл бұрын
not the best idea in the world but it can be done
PhongVLG
Рет қаралды 35 М.
ABRACADABRA TV
Рет қаралды 9 МЛН
PhongVLG
Рет қаралды 50 М.
PhongVLG
Рет қаралды 292 М.