Seriously. This needs to be at the top of comments.

He used about 5X too much teflon tape. His electrical skills will put someone 6-feet-under someday.

Also of concern, the unit is rated as 2 phase, 240V at 50A. From the looks of it, they are running all 50A that should go through two wires, only going through one wire.

Agreed! Also you should not have a valve installed on the “OUTLET” of a water heater!

that my worry

@@Glasswithattitude Check the tables then go at least one size heavier. I used #6, - it called for #8. Those who need to save money should first _carefully determine the correct wire to use_ , buy it, run it, then call an electrician to inspect/connect it.

@@worthington5687 How is it working? I purchased one but didn’t install it yet. I’m worried about installing a 220V #6 and 50A… that’s a lot of juice!

@@lawrencecohen9715 You're smart to be concerned. 220v can be scary. If you've never done that work before and are really nervous about it I recommend consulting an electrician. Anyway, I think I broke my unit, I'm still looking for parts as it's out of warranty.

Hola, envía una foto con la disposición de tus cables y algunas fotos generales del calentador. Si puedo, te lo explicaré.

No pump is included.

Switchbot

A pool forum will have tons of tech info on that.

The green light is part of an optional circulation pump control. For that you need a second relay and refer to wiring diagram 4 of the 2021.01.06 manual.

The guy in this video is probably dead by now...And anybody swimming in that pool too...Geeezus

hi! send me couple pics of your wiring and basic pics of the heater - will see if i can help you

the maill ... north2005 at g m a i l c o m - can rwrite normally because the you tu be filters

Tropical Oasis 10mm

Looks like there is no neutral required, so 12/2 would be fine. Black tape on both ends of the white wire to show it's a hot and you are good to go

I’m have the same one and I’m use #6 wire Bc the breakers is 50 amp but I’m have issues Bc I don’t have neutral.?

I just bought one too, did you ever figure out on how its wired?

I just bought one too, did you ever figure out on how its wired?

Just splice L1 and L2 to one phase then L3 and N to the other phase.

you need 3 Phase electrical like industrial most houses are single phase

@@chonkiras do have pictures of this. I am having so much trouble

Were you able to solve?

Hold down the button and it should display the flow rate.

Yes, depending on the model and where you live and how quickly you need the water heated. . I got the biggest 27 one.

You know how mutch HP machine need?

Any Hayward 1.5HP is prolly good.

Need to up the wire size and possibly the breaker

Domingo Rios u don’t just tell someone up the wire and possible the breaker ask what size breaker is needed and ask what size wire they are using before u potential burn someone’s house down

10mm

What #breaker to use for this heater?

I just bought the same heater can someone how to properly connected wires and all please thanks

i used on the angle and also - before mounted permanently - was on the side. worked. all of the problem in these - can be the sensor inside the u-pipe - water channel inside the box, but this generation don't have any moving part inside - sensor for the stream - is electronic or somehow made without any lever or other moving part, so position doesn't matter. but, anyways - this my personal opinion and i'm not technician or installer... do what you want to do :) better be sure on breaker - give a little more amps. mine was changed couple times . 18 kw heater - 20a - worked for few months and started to overheat. maybe the quality... replaced with 25 - no problem. good luck!

@@barzdunFor a 18kW heater you need at least a 75amp breaker.

Payed an electrician to put it in and almost everything has blown i have 2 elements and it leakes everywhere

No lie, look at his carton/packing tape on the splices, then touching right on the metal edge... WTF, hope that wasn't a permanent wiring job. 😮

Wire directly to your panel. It needs tons of current. Never even TRY a standard outlet.

NEVER seen so much teflon OCD !!!!

I’m surprised the damn female threaded on it was so thick of tape

dude what the fuck i was thinking the same thing this gucking guy is god dam crazy that fucking triggers me

🤣🤣🤣🤣🤣🤷‍♂️🤷‍♂️😜😜😜

And this what a crack head looks like using Teflon tape🤦😏🤣🤣🤣🤣🤣🤣🤣🤣

Worst investment yet

Where is it leaking?

Thank-you.

Ny running amps does it pull?

Cómo lo conecto la línea