My son just got me an ET4 yesterday. This may be a 2-year-old video at this point, but it will help a LOT. Thanks from 2024.

Thank you! Im a new subscriber my 11 year old son has an ANET ET4 pro we just opened it after 1 year this will help him a lot!

Thanks, this helped alot!

Man I was having a time with mine. Bought some silicone spacers to use instead of the springs. Works a treat. Then used a spare PEI sheet I had laying around. Coupled with your Cura settings that I imported to Prusa slicer, it's printing like a champ. Thank you.

anet et4, its cheap and currently on discount almost everywhere. for what it cost, it's really great.

I suggest when doing…manual or auto level and when setting the the Z ( nozzle) height above bed..the adjusting the sensor in Setting, that all should be carried out with the bed heated at whatever you use when printing. Also take not PLA bed 50 or 60 is good. If in a hot humid country, the ambient room temperature should be taken into account and adjust bed temp accordingly.

Thanks a lot, great video.Can you make a quick manual bed leveling video?

I've had my ET4 for a month and I'm STILL fighting with it. I've read so many articles and fixes etc but it doesn't seem to fix my issues. Tomorrow when I'm less frustrated I'm going to try your tips I have heard of some ppl having issues with the sensor (me included). If I get the bed manually levelled, do I have to autolevel? That's when it smacks into the bed.

very useful tips!! Thank you for sharing!

saya suka 3d printer ini❤

Hello sir. I have this exact Anet ET4 3D Printer. However, I have issues when printing. 1. In the Prepare setting: the 4 bed positions, only moves to the Homing Position. I tried to manually move the X and Y axis but ultimately it will auto move to the Homing Position still. 2. Z axis height: Once I set the height correctly when start printing, I notice in the second time printing the Z height moved up alittle each time. Would you kindly tell me what are the solutions to these?

Hi. Can i use 1.1.7 fw on ET4 which doest have auto leveling sensor. I have now the first 1.10 version. I m wondering will my ET4 start to go home at bottom? as i have stock senor on z axis only at the top. Do i need end switch hardware modification if i upgrade to 1.1.7 fw as it will start to go home to the bottom or it will still go to the the top at home position. I dont want to use any auto level function but want to use M503 and other gcode to setup estep calibration which only supported by the 1.1.7fw. Thanks

Nice

Hi can u make on how to service the Anet ET4 or 3D printer in general? Great videos!

i just bought mine ET4 after seeing this video, but i have a question about the filament. what sis the suitable temperature for it ? the filament is come from the Jadi life with package of printer i bought there. thanks

How the cura setting if i want make with extra fine quality (0.06mm), tutorial please..

How does the treatment of the printer anet et4 um look well

Good Video! Thanks for sharing. I just bought a Anet ET5 and watching your video I realized taht you paste the black printer base between the hot bed and the glass....can I print directly over the black base or should I use the glass always? Today I did some tests printing over the glass but I got the warping effect :( any suggestion friend? thanks!!

Nice video. I am still new on this field and planning to buy Anet ET4 for a start. I have some questions and hopefully you don't mind to answer them 😃 Thanks in advance 1. Do I have to worry about electric bill? 2. Is there any heating issue? Any tips about room temperature? 3. How about the noise?

So sad, i spend now my 5th weekend to print, and tge printer is not stopping shifting in the Y axis. Thigten the beld, cleaned an thigten the wheels, leveled over and over, ordered a temored glass, tried out ti print with 50, 70, 80% speed, but nothing to doo :( :( :( Please help

How can you have infill speed 100? I have to use 35 bcs hotend cant take that much PLA even heat on 220 and bowden clicking like hell... Also always have to use manual leveling bcs autolevel did good leveling...

Good day) Have you had problems with your Z-axis sensor? I keep adjusting it but it won't adjust and tries to go under the table.

i see your manual Bed Level but u didnt use a paper to measure it? do i miss somethings here?

Anet this one or ender 3? Which one better ?

Can make video more power?

my experince with anet wasnt great.. after 4 months the cooler fan for the nozzle wasnt running anymore after about 5 months the other fan startet to make strange noises and i wrote the seller, the seller sayd its normal 5 months is a long time for a printer i should buy a new one anet doesnt respond to any of my questions to let the printer repair the seller refused to repair it... never gonna buy a anet again

How the cura setting if i want make with extra fine quality (0.06mm), tutorial please..

How the cura setting if i want make with extra fine quality (0.06mm), tutorial please..