My 2014 Honda Accord had these codes. I removed the black module (only 4 small screws and the wiring plug) and left the ABS pump body in. Since I didn't have to remove any break lines/tubes it saved me from having to bleed the brakes. I mailed the module into Module Masters and they sent it back in 3 days fully refurbished. $300 after shipping. Reinstalled it in 10 minutes, drove it around and the indicator reset itself after a few minutes. All fixed! Module Masters gave me a 5-year warranty on it. Easiest repair ever.

Excellent performance in the brake system service. Thank so much for video.

Any video sharing knowledge on this problem is valuable. Thank you. That being said, it is even easier (as long as you have basic DIY skills) to remove only the black ABS module and leave the brake lines still connected to the silver colored block. Send the module off for rebuild and re-install. I used Module Master and got great service, plus they back their work up with a warranty. You can drive the car without the module - will be lots of warning lights on and no ABS/Traction Control. 2014 Accord Sport here.

Great Information fo replacement....

Thanks a lot for the information, i have fixed my Honda Insight ABS module motor pump stuck... anyway, good luck for the future! Greetings from Bucharest, Romania!

Great, informative & helpful video. You likely will save some Accord owners a ~lot~ of money! It seems that Honda quality has been slipping these past 10 years or so. What a shame. I hope they can get it right again and I'm also hoping my '13 Accord 6MT never needs this repair! I don't think my next new car will be a Honda which is sad as I've been a Honda fan since buying a 1987 Civic Si back when I was starting out as a driver.

❤❤❤thank you

U can heat up the flare nuts with bolt induction heater or heat gun to the module with penatrating fluid.

Thank you for this video, and thank you all for the comments, learned a lot. I have a 2013 Honda Civic with this code ordered part and have been waiting for 6 months for the part to arrive current status unknown. Issue diagnosed at around 122k miles and currently have 132k miles on car. The light would come on and off intermittently since November of last year but erroneously received a suggestion from the dealer that it might be a software update issue so might not be a serious problem, they would only do it if the codes light up which it was not always on but maybe a few minutes every couple hours of operation back then. I saw someone got a loaner while waiting for this part to arrive. What functional aspect of the vehicle is not working?

Nice video. My 2014 accord is having same issue. I will fix it for mine. However I sae in another video that black module can be repaired. So will try to fix it in my workshop.

A lot of times tightening the line can bust the threads for you also, then you can remove. Valve lapping compound looks pretty slick! Increase friction yeah?

Informative certainly. I thought you needed to fully cycle the ABS unit with the diagnostic in order to fully expel the air from within???

Yes I have a 2013 Honda crosstour and I'm getting the same trouble code but I'll check with Honda with the discount that complete pieces like $1,100 and I believe the remanufactured module I think is between $300 and $400 so I just wonder how long the remanufactured module last😊

Does the code numbers on the abs module pump have to match when changing it?

I have same problems this car as well but I scanner a code is 123-11 is that the same part I need

I have question my car is 2013 Honda accord sport I buy abs 2012 I don’t know is work ? Or what years I need for my. Car help me please

Is there a way to do the sensor re learn without the tool? I found a used module, from exact same model 2013 Accord LX-S. I can do the replacement but not sure the re learn can be done through the OBD2 jumper procedure.

Thank you for this video great job. Do you have any suggestion or alternative to buying the Honda part being that it is so expensive? Any thoughts on having it repaired. Can I drive without replacing it, like in the old days no ABS? Can this result in other damage?

Im getting vsa signal failed 85-01 and fwc lwd sensor giving( invalid data ) uo416 anyone know if this is vsa croaking out or if its just maybe a fuse.. have already changed the battery. problem is intermiten sometimes itll be on as soon as i turn the car on sometimes i need to drive for a few miles im so stuck on this issue

Hello sir, my 2013 Honda Accord has the same issue? Where did you buy that VSA pump? Could you let me know please? Thanks in advance

How do you remove that connector exactly? I see you pry up a tab on top, but isn't there a bottom tab too? What do you do with that white piece? Do you lift it or push it back (away)? Thanks please!!!

Hello I had the 121-11 code listed , mechanic replaced the module, did the reset and calibration but vsa light and traction, abs and fwc fault are still on any tips?

Hi I have a 2016 Honda Accord EX-L V6. My VSA light is not on but other lights on my dashboard are on. The ABS, Tire Pressure, BRAKE, Powering Steering, and the Stability Control lights keep turning on and off and keep repeating that. I scanned the car and the code 121-11 VSA Solenoid Valve Malfunction comes up. If the VSA light on the dash is not lighting up but my scanner has that code, do you think that means I need to replace the ABS Module? Also, how do I find out before starting this job if my scanner being (the CRP123 Professional) can do the neutral position memorization procedure? Thank You In Advance For Your Help!

are there any code readers I can buy to reset the lights myself? I got my module repaired but the lights are still on after installing

Hi, there. ABS Module part its in "back order" status. I cant found original part. Can you tell me where did you get it?. I need one for a 2017 Accord Sport CVT.

I need to replaced the same part!! For my accord 2015 do you have a link to order the part? Or the part name

How did you get it out without brake fluid oozing out? I had quite a mess after removal.

Just wondering why would the module fail?? Thanks for another awesome video!

Hey guys. I have a 2014 Honda Accord Sedan LX with similar issue. ABS, Brake, Traction Control lights are all on. I've been chasing this down for 3 months. Is it possible the fuse could cause this? I ordered a used pump on EBAY but it was for a 2015. When my mechanic put it in he said it wouldn't talk with the ECU computer. My question is does that matter? I have not noticed any effect on the car with braking or anything else and Id love to get these lights off. When I start the car in the morning the lights go off for 2 hours making me think its getting a bad signal and might be a fuse or bad relay. I would appreciate your thoughts on this. My car has 121K and I am the original owner and dealers are crazy what they want to fix something like this. Car runs great.

I have a 2014 Accord with the same problem, how do I know which module is compatible with my car?

Does the fcw and ldw light have something to do with vsa

I used my scan tool to see the solenoid itself. And the value was stuck. Boom. Bad

Cuanto cuesta el modulo vsa

Should use a rag when bleeding module. Brake fluid is corrosive .

if I replace with used one do I need to reprogram it?

This part is extremely expensive. Would it be ok to buy a third party ABS module

About the brake bleeding...your friend is only pressing the brake halfway down?

Why there is no pressure when you bleed the calipers

Any good website to find 2012 HONDA ACCORD ABS MODULATOR & PUMP ASSEMBLY (US MARKET), SEDAN, 2.4L AUTOMATIC

Where did you order a new VSA Modular? I’ve been waiting for a month to just see if they can order them. 2 dealerships have them on back order.

What symptoms are the vehicle is experiencing? Don’t just give the code or lights.

Way Too Much Mess With The Oil For Bleeding The Brakes