139 - Exact-Width Dado Jig

Рет қаралды 1,936,132

13 жыл бұрын

Watch our latest video! "Refinishing a Retro Heywood Wakefield Desk With A Stunning New Look!"
• Transforming A Retro H... -~-
For a PDF and SketchUp plan of this project, head to www.thewoodwhisperer.com/video...
In the Weekend Wall Shelf episode, I showed you how to use a parallel jig to create dados. But the jig was originally created for making coves at the tablesaw. So here's a special jig made specifically for the purpose of creating dados with your router. The best part is, you can get exact-width dados EVERY TIME!
This jig was developed and demonstrated in the current Guild Build as part of the Wall-Hanging Cabinet series (it was originally inspired by this Wood Magazine Jig). This video is a little sample of what Guild members are enjoying every week during the build season. If you are interested in joining the Guild, learn more here.
This jig can be made to any size for any bit/guide bushing combination. Just remember that once you use a particular bit/bushing combo with the jig, you are stuck with it. Using a different combination will defeat the purpose of the jig. I used a 5/8″ guide bushing and a 1/2″ router bit.
Don't forget to download the PDF and SketchUp drawing for the Exact Width Dado Jig!
Jig Modifications
I requested ideas modifications to the jig, and a couple Guild members were quick to off suggestions. If you have a modification, upload it to our SketchUp Library and share the link in the comments below.
The Wood Whisperer is education and entertainment for the modern woodworker! Find more free woodworking videos & articles at thewoodwhisperer.com & don't forget to subscribe to our KZfaq channel! kzfaq.info_c...
Connect with us!
Follow us on Twitter / woodwhisperer
Like us on Facebook / thewoodwhisperer
Pin us on Pinterest / woodwhisperer
Learn more about our premium project videos at thewoodwhispererguild.com

Пікірлер: 340

@rickyjohnson8647 6 ай бұрын

Mark, All of your video's are great. You explain everything in detail without distracting content. You should be on TV. You are much better than the woodworking shows that I watch. Keep up the good work! Thanks

@Steelshooter 12 жыл бұрын

Marc I can't thank you enough for your inspiration. After watching your videos I've put your teaching to good use and my woodworking is really improving. I built your exact-width fado jic and it works perfectly. The only changes I made to your design was to make the adjustable fence wider which gave me more clearance for my router which allowed me to mount the knobs on the top of the jig. Thanks again so much.

@chipsterb4946 4 жыл бұрын

I watched this a good while ago. Started fabrication of an “improved” version and ran into problems. So I watched the video again today. Now I see why the closer knob needs to be on the bottom. Time to figure out the best way to put the far knob on top. Thanks Mark!

@dennismcgrath3763 7 жыл бұрын

I watched three videos regarding perfect width dados. Each was progressively better. Yours was number 3. If I had learned nothing else I am grateful for learning how to make a mini "L" fence to trim edge banding. The jig that you built is elegant right down to the hardwood edges. I am going to put this movie on my favorites bar.

@ruizd14 11 жыл бұрын

I finally got around to building this jig and it works great! Creates exact (snug) fitting dadoes each time. It only took me an afternoon to build - less the glue dry time, of course. Thanks for posting the idea, Marc.

@math3513 10 жыл бұрын

Works a treat I made one yesterday with a lovely oak trim. Cheers for the step by step guide Mark even I couldn't go wrong :)

@acehood82 6 жыл бұрын

I followed your instructions and found it very easy to make. I use this jig all the time. Thanks for sharing this!

@olebiker 4 жыл бұрын

I just finished the jig this afternoon. Test cuts were right on. Thanks.

@ramaroodle 6 жыл бұрын

Made the slotted side twice as wide (5") so the knobs could be on top and be clear of the router. Worked perfectly! Thanks.

@philareilly 12 жыл бұрын

Thank you! FYI, I'll be joining the guild in the next few months after aging watched these videos. I'm really impressed with how you explain the concepts. You could take the crown when Norm Abrahm Retires!

@kendallhuseman3685 10 жыл бұрын

Wanted to say thanks! I finally had some time to make this jig and it works excellent! Made my first stopped dado without a lot of hassle. Great for shelving. I was amazed at how strong the joint was when you get the exact width. There isn't any play. No need for screws.

@dongkumong 11 жыл бұрын

thank you for your frankness about the finish sanding

@brianm.9451 8 жыл бұрын

As a beginning wood worker, this just saved me a bunch of money.

@mpride1911 8 жыл бұрын

This is so simple, but I can't describe how much of a headache this would have saved me if I knew about this last weekend.

@zenbooter 9 жыл бұрын

hey marc, so glad I clicked your vid. I made two of these way back now I find I need em again,sooo. I used a bearing over pattern bit to cut the slots, but you have to be more careful. why anyone would not appreciate your vid is like the rest of those mysteries.

@mmx5lover 13 жыл бұрын

Dude!!!! I only wanted to learn how to do an inlay!!! It's been more than three hours since I started watching your videos and I can't stop!!! You are the man

@sudarkoff 11 жыл бұрын

Thanks for the clip, Marc! I made a similar jig but I ended up using a flush trim bit and I found that it made the jig a lot more versatile. You can use a bit of any diameter and length and in any router and the jig still works. Also you don't have to center the guide bushing perfectly each time. And finally, you can flip the jig upside down if needed.

@TC-dw6wg 4 жыл бұрын

Perfect solution. Nice and simple also

@brucewilliamsstudio4932 Жыл бұрын

Flush trim bit with a top bearing.

@brianhunsinger1191 10 жыл бұрын

Thanks man, I'm new to routing and this helped greatly.

@joseolaguera7785 4 жыл бұрын

“Bring the little clamp in here...” *brings out monstrous clamp*

@michaelhooker3473 5 ай бұрын

And then he did it again with an even bigger one! No-one round here even sells anything as big as them, and if they did I couldn't afford them.

@BlackBlade0001 6 жыл бұрын

I usually don't like watching vids where the guy uses all these high end/expensive tools and gizmos, but must admit you do a really nice job of presenting the project! I made one of these years back from a ShopNotes plan using hardboard and hardwood strips..and it worked perfect as well. Good job!

@jerrybettis5720 2 жыл бұрын

ONE OF THE BETTER QUALITY,DETAILED VIDEOS I HAVE WATCHED.

@muralidharamysore2549 8 жыл бұрын

Great jig. Modification could be screw in nut in place of T bolt and socket head cap screw (Allen screw ) with a wide washer in a stepped slot on the top. With this set-up you will need an Allen wrench handy !!

@greghamilton5872 3 жыл бұрын

Well I just spent the whole day watching and re-watching another unnamed "how to guy" building the same jig. (well not exactly the same but at a glance...) WHY DIDN'T I USE THIS ONE??? I think I'll just redo the whole jig and build one like yours. Really well done video and I really appreciate the detailed PDF drawings too! Thanks a million sir!

@barrynorman3906 9 жыл бұрын

Great jig relatively easy to make and will be very useful. Thanks.

@TokyoCraftsman 7 жыл бұрын

Well after cobbling together a few of this type of jig and never being really happy with the results, today I gave it the full "Spagnuolo" and made it to spec, just like you did Marc, the glue is still setting up on the final attachment to of the long guide rails to the short and long end rails, but it looks great. Cheers!

@bluesky6327 7 жыл бұрын

Super. I learned a lot just watching your techniques for building the jig.

@kenerickson3849 6 жыл бұрын

I am setting up my new shop and needed to build wall cabinets with a top and bottom set into dados. I just made one of these dado guides with some scrap 3/4" MDF. My adjustment slots were made with a drill bit and then cut out with a jig saw between holes. I ensured my 1/4 - 20 bolts slid without binding. I added threaded inserts into the top of the sliding piece and used a toilet flange bolt and home made star knobs that screwed into the threaded insert (ensuring the bolt didn't raise above the top). Instead of using a bushing, I used a top-bearing 1/2" pattern router bit that runs along the 2 edges. I couldn't get pattern bit locally less than 1" long, so I had to add 1/4" strips to raise the guide edge. It worked fine.

@wrightly96TN 12 жыл бұрын

good job with your videos man. i love them. you're easy to listen to and sound really down to earth. my first love was my wife, my second love were my children, my third love is woodworking. i've watched maybe 4 of your videos and have already learned something new

@gb4816 7 жыл бұрын

I am curious, would you please explain why you chose a guide bushing / router bit set up vs a patterning bit with an integral guide top bearing? Regards and thanks for all I have learned from your excellent videos ! G

@woodwhisperer 12 жыл бұрын

You definitely could do that. I was trying to keep the jig as low profile as possible using scraps I had on hand. But that's exactly why I invited folks to experiment and expand on the concept. This by no means is this the end all be all version of this type of jig.

@gerbergonzalez448 7 жыл бұрын

I love your videos they helped me make a lot of furniture. Keep up the good work!

@tympt1 13 жыл бұрын

Just made one of these today Marc. Absolutely brilliant! Thanks for the advice. Regards Barry (England)

@sakeena12 13 жыл бұрын

That was a really good presentation and a really excellent jig i think mark is one of the better woodwork teachers good clear voice and a gentel accent

@nalayoun9933 9 жыл бұрын

Knobs on top .Recess the bolt heads using lock washers will prevent shifting.. Adding a twist knob on each end allows adjustment for any bit.Your video presentation has improved greatly form the first one I viewed. My first impression was a not so serous wood worker hopped up on too much caffeine.Everyone deserves the benefit of doubt. Then you mentioned Sponge Bob Square Pants. Being an Old Duffer an spent time with my children s children watching that show. Well you had me then.. Keep the videos coming. Enjoy each one. Thank You

@eddieoquendo8988 9 ай бұрын

I have created the missing link to that jig it took me 15 years. It’s finally finish contact me. Never been seen before. Amazing.

@vieuxacadian9455 3 жыл бұрын

Thanks for sharing . I made a similar jig back in the late '70s .

@markkoons7488 4 жыл бұрын

After awhile the typical shop ends up with many routers, some not used in years. The same is true of guide bushings. After centering the base plate, dedicating one of those mutts to cutting dadoes would be an ideal use and having the jig and router all set up would expedite the work. Thank you.

@charlesdevillier4706 8 жыл бұрын

Word of warning to anyone building this jig... i just finished building this jig and it works great, but i quickly realized that there is no stop for your side to side so if you're making a dado all the way across the piece, you can easily continue the dado onto the jig itself. I only found this out after doing this to my brand new jig. It will still work but its just weakened now with a 3/4 inch dado cut into the fence piece. I also found out the hard way that if you are not careful taking the router off the jig while its still spinning, you will knick the edge of your perfectly straight reference edge.... obviously these things are common sense, i guess i got a little too excited to try out my new jig. Anyway, top knotch video and idea marc!

@harveybissette1862 8 жыл бұрын

+charles devillier see above. I'm building a bigger one.

@woodwhisperer 11 жыл бұрын

They can do the same thing, depending on the bit you're talking about. It does guide the bit a particular distance from a surface. But guide bushings are still very much needed in woodworking.

@bayarearoadster 10 жыл бұрын

I think you'd be able to put the knobs on top if you were to make the Long and Short fences wider, then offset the knobs to the outside edge. How much wider and how much to offset will be determined by your router base, enough so it doesn't interfere when you are at the ends. May not even have to do this to the short end unless you really want to use the full length of the jig.

@kenhart6330 2 жыл бұрын

Coach bolts would be great for this job, heads underneath with the nut & washers on top. Smaller nuts will still do the same as his large knobs. Especially if using clamps every time, you can use a spanner to tighten them.

@rickymcgrath2314 4 жыл бұрын

Marc, make the jig a little wider, specifically, the piece that moves or is adjustable. Make it wide enough, you can put the plastic knob on top and the router can still slide past the plastic knob by offsetting the locking hardware far enough to the outside it clear the router.

@bati800 10 жыл бұрын

great way to do things. and i like your way to use auxiliary fince to trem the excess of wood

@MichaelAgate 12 жыл бұрын

Inventor of JessEm router lift we are proud to say is a Newfie like us. We have the Mast R Lift Excell II and love it. Nice to see you using JessEm as well Marc.

@kellyr.7902 9 жыл бұрын

Another possible solution to the challenge posed: put the bolts thru from the bottom, so the knobs are on top. So that the knobs aren't in the way of the router base, simply make your two rails wider, and position the knobs towards the outside.

@ugandaprof 5 жыл бұрын

Kelly Rago Wouldn’t having the adjustment knobs on top potentially impede the movement of the router? Maybe mark could try it since he’s already built his jig, then let us know? I’m going to build one. I destroyed a table top when tried cutting a dado using a straightedge. I’m 70 with shaking hands and need more insurance against pulling the router off line. This is a GREAT video! Karl

@rbwoodwork1890 5 жыл бұрын

I see what Kelly is saying but the rails would have to be wider or “L” shaped to get the knobs out far enough to clear the router.

@thomasfugate8640 4 жыл бұрын

This was my solution, Kelly. Rails just need to be about 3.25” wide from the widest part of the knob towards the working slot. I find the ability to keep the work flat to the bench more important.

@j.b.8767 3 ай бұрын

Thank you, brother! Great video!

@woodwhisperer 13 жыл бұрын

@cartoonkeith1 The description for this video has a link to our website where you can download the plans and measured drawings for the project. Combined with the video, that should be just about everything you need to reproduce the jig.

@solsdadio 5 жыл бұрын

Thanks for sharing. Good health to you and yours.

@georgebarthel6621 6 жыл бұрын

Great video. I am endeavoring to start making this jig based on the inspiration here! Thanks in advance. Question. Could the initial 1/2 x 1/8 rail rabbet be done just as well with a table saw?

@rodneysingh283 7 жыл бұрын

hello i am just starting out can you recommend a table saw and brad nailer and other tools you think i would need thanks you do a good job explaining

@IanKWatts Жыл бұрын

Just built one. Yes I did modify the position of those knobs by simply placing them on top with the head of the bolt secured in the bottom piece.

@zenbooter 6 жыл бұрын

I love this jig, thanks.

@sacasticus 5 жыл бұрын

After watching your one time tool demo.i was wondering what would be the maximum length you would feel comfortable building this jig to?

@mralh03 12 жыл бұрын

Great jig & really all your videos have been very useful to me, thank you.

@cesarfeliciano1663 9 жыл бұрын

Me gusta mucho el trabajo en madera. Todas estas ideas son cool thanks a lot.

@mwilson70201 11 жыл бұрын

I love this jig. It works very well and is simple to make. My only issue was due to the length of cut on my piloted router bit 3/4" plywood is to thin. I had to add a layer of 1/4" plywood to allow the top bearing to make contact with the guiding surface when routing a dado 3/8" deep. Other than that it's a great video and a welcome addition to my tool collection. Thanks.

@woodwhisperer 13 жыл бұрын

@hypnolobster Not sure what you mean by setup clamps.... Can you elaborate?

@Guidetowoodworking 13 жыл бұрын

once again mark you always outdo your self thanks for the jig video i will make me one very soon using your design nice jig

@bobmartin6055 4 ай бұрын

Outstanding!

@user-mf5dg3je8u 9 ай бұрын

Hey great idea… I upgraded my fence to an alloy fence… and works fantastic

@ugandaprof 5 жыл бұрын

What brand are the little clamps you used to secure the two fences when flushing out the hardwood using the little rabbet channel ? I’ve watched the video about 30 times. Thanks for your post! John

@rikkiesix 13 жыл бұрын

This is a really handy tool man Thanks for this video Greetings from Belgium Erik

@MrAlchemist7777 7 жыл бұрын

Thanx Marc straight forward design

@DaveG1 11 жыл бұрын

Right on, I've made many 'one use' brad nailed scrap jigs around the base of my router,(straight cutter, no guide). With your idea, now I need only one jig and a dedicated router. I guess its better.

@woodwhisperer 12 жыл бұрын

Love my Jessem table and lift!

@stormbytes 4 жыл бұрын

Will be building some variation on this design. Than you!

@woodwhisperer 13 жыл бұрын

@ImposingSumo The problem with that is the knobs. They would be in the way of the router base. So you'd have to made the rails much wider so the base of the router would ride freely on the rails.

@davidsmith3334 4 жыл бұрын

Thanks for a great video one question where can I get the clamps that you used to hold the auxiliary fence, I'm from the UK Regards Dave

@smakinskifofo4030 3 жыл бұрын

Thanks for the great Job

@stochasmvid 13 жыл бұрын

Nice! This could also be used for hand-cut dados, as a guide for a carcase saw for the shoulder cuts. You could also make a variation with sloped sides as a guide for sawing sliding dovetails. With the adjustable ends, you could even tap one end tighter to get tapered sliding dovetails. While both of these operations can be done by hand fairly easily, the compound angle of the tapered dovetail does get tricky. I also like your video style, dynamic and direct!

@elvisoshaughnessy1255 7 жыл бұрын

Hi can we use straight bit instead using spirol bit on a router table for making the slots for making the jig

@ralpfpunevsky2443 10 жыл бұрын

Отличная работа

@SpencleyDesignCo 4 жыл бұрын

Thanks Marc!

@tony2495 12 жыл бұрын

Great videos. Watching them really puts me in the mood.........to do wood work. I was thinking that it might be beneficial if after you clamped your piece in the jig, that you put a thin pencil line on the workpiece that you're going to cut the dado in,on the outside of the jig so that when you pull the piece out you would know if the jig moved, If it did you would no longer see the pencil line. Keep up the good work

@dannyboy9784 9 жыл бұрын

NIce video, where can I find a bit like the one you're using?

@jimmyjamautrey 4 жыл бұрын

Great video

@austinsolis2920 8 жыл бұрын

the sound of the playoffs and the sound of wood shavings hahah truly paradise , great videos man, learning a lot! thanks

@jodycadwalladerm3268 8 жыл бұрын

my brother recommended *TopFineWoodworking .Com* for the best woodworking plans and I couldnt agree more after getting it. Tons of amazing plans for sheds in there.......

@jeepsuc99 4 жыл бұрын

So simple. But soo useful!!

@harveybissette1862 8 жыл бұрын

Could you give me the number of the magazine. I'm sure I have it. Thanks. Harvey

@johnfuller4991 2 жыл бұрын

Hello, I realize this is a really old video built this jig and it's great. I have a problem of the short end moving about 1/16 - 1/8 of an inch when clamped down. checked to be sure everything is square and it is. Wondered if you might have a thought on this> thanks

@HewAndAwe 10 жыл бұрын

Hi, I started to make this jig today, but stalled a bit pondering the problem that using the jig the work piece has to be raised or off the bench, I was wondering if you made the rails longer and the fences wider i.e. add the width of what ever your router is plus your measurements and use the same knobs and bolts but further away from the front of the fences and also with the knob on the top instead of underneath.. Can you see any problems in this, maybe it wont clamp so well or something...?

@gordanzzzz 5 жыл бұрын

Where can I find those big read clamps ? Nice video thanks

@Belg1970 9 жыл бұрын

So Marc, did anyone come up with any better suggestions on how to do the knobs?

@semmons23 13 жыл бұрын

Built this today and when I was looking thru my hardware I found some double threaded furniture hardware that would allow you to use it on your bench. Not sure what they are called but there is a course outer thread to hold in the wood and an inner thread that would tighten down the movable fench. I didn't have and screws that fit so I didn't try it but it should work

@lg12159 11 жыл бұрын

I dunno...I guess a "guys and gals" every now and then would be all I'm thinking about. Maybe this just speaks to my own need to network a little more. You are fantastic, no criticism implied. The real feedback is that I've learned a ton from you. No higher praise!

@charleswrayjr9982 9 жыл бұрын

Exactly what router bit is being used for the all-important "first vital pass" after jig is completed. It's key to finishing the jig, but is not mentioned!

@markb1254 5 жыл бұрын

It doesn't really make that much difference as long as you always use the same bushing and bit setup. At 12:59 he says it was done with a 5/8 ths bushing and a 1/2 inch bit.

@heli400 11 жыл бұрын

I'm going to give myself a pat on the back. I made a jig similar to this a while ago before i saw this video. The difference in my jig is that both sides are secured (for 11/16th birch ply) & I didn't bother with the rabbits I just used 1/4" hardboard on the bottom and routered to size with the guide bushing. It gave me a nice tight fit! But I am also glad I watched this for more ideas

@garywilkins2371 5 жыл бұрын

Hello Mark, You could put the tightening knobs at the top, making your adjustable pieces at the end a little longer and use a palm router not a large router because the dado is normally not that deep, just a thought! Regards, Gary Wilkins Australia 11/2018

@fapa1983 13 жыл бұрын

When you clamp the work piece to the bench, what brand holdfast is that? I have just built a bench and would like to get a (or two) holdfast like that. Thanks

@stellari81 11 жыл бұрын

@10:45 "Bring a little clamp in here"... it's the biggest clamp I ever seen... :)

@motechRevolution 10 жыл бұрын

Simple solution to the knobs below, make the guide rails about 6 inches, glue and fix fences onto guide rails so that when the router sits in the recess both higher fences are tight to the round edges of the router base. make sure the lower rails are butted together, clamp the the sliding side, then with your preffere bit route down the center, no collar needed, now install your timber to get dado width and clamp, the higher rails act as the fence. Install locking knobs in high section.

@physicsguybrian 10 жыл бұрын

Interesting idea. A couple thoughts: (1) Not all routers have a round base so what you suggest would tie the jig to a specific router. (2) Referencing off the base edge is no where nearly as precise or repeatable as a router guide bushing.

@motechRevolution 10 жыл бұрын

my router has a round base with one flat side the flat fence side sits against the timber fence. no rotation of the router and it's deadly accurate

@johncerto4106 3 жыл бұрын

what size bushing &bit would i use for 1/2" ply or do i need to make a new set up

@waynebeck9803 10 жыл бұрын

Where do you find that router bit and bearing combo?

@philareilly 12 жыл бұрын

Excellent video! You mention that this setup only works for this particular bit and collar combination, but wouldn't it work for other bit and collar combinations where the difference between them was 1/8"?

@woodwhisperer 13 жыл бұрын

@DanHolly3 haha, i'll take whatever flattery I can get!

@oddsandwindsocks5905 Жыл бұрын

Nicely done, I just wondering why not have both rails the same length. And if you slot the side rails you be able to use the jig as a clamp to .as you be able to push the bottom rail up against the other side of the wood your grooving.

@miguelgmusic 13 жыл бұрын

Great job.

@johnspencer8068 11 жыл бұрын

The inside edges of the guides are wider at the top than at the bottom (that's why there is a rabbet there). The guide bushing fits in the top, and the bottom (cut by the router blade and thus the same size as the dado cut) is what you adjust to fit your shelf. Though it does seem to me that there could be a problem if the bit was not exactly centered in the bushing every time, as it might nibble some away from one edge if it was not, so next time the slot would be too narrow.

@lg12159 11 жыл бұрын

Marc - I really love your in-depth tutorials and your insight into the potential pitfalls of particular techniques or projects. Thanks for sharing your passion. Besides all the kudos, I have you pegged as the most sophisticated, urbane and downright contemporary woodworker sharing stuff on KZfaq, etc. So - I know that probably 99% of your viewers/members are "guys." But howzabout every now & then using some inclusive language for the women woodworkers out there? It would make me smile.