1962 Impala restoration Part 11 - position floor pan - rockers, then cut off quarters and trunk

Рет қаралды 15,168

Guzzi Fabrication - D.I.Y Auto Restoration

2 жыл бұрын

SHOP INFORMATION :
Contact us at : guzzifabrication@yahoo.com
Our Address is: Guzzi Fabrication
3206 Main St Suite 106
Rowlett Tx 75088
Check out my other videos in our KZfaq playlist page: www.youtube.com/@guzzifabrica...
Honesty - Quality - Craftsmanship
What We Do : Rust / Collision Repair
Metal Fabrication - Steel - Aluminum - Stainless
Complete Chassis / Aftermarket Chassis - Front & Rear Installation
Frame Fabrication / Straightening
Drive Train ( OEM / Custom )
Wiring
HVAC
Resto Mod
4X4
Street Rod
Hot Rod
Custom
Antique
Speed Shop
DIY Auto Restoration
Over 20 Industry Certifications on Display:
Current AWS Welding Certs
I-Car Collision certifications
PPG Paint Certifications
OSHA - 10 Certification
NCS NESHAP Certification
EPA Compliance
Blacksmithing Certificate
Eastfield College
profile.php?...
Google search : guzzi fabrication rowlett tx - To check out our reviews
Thanks for watching !

Пікірлер: 81

@davidskaar3232 2 жыл бұрын

Watching a procedure I couldn't do. But it would be.nice to be rich to support the art of restoration and teaching new students. Always want the youth to learn such a great artform.

@guzzifabrication3448 2 жыл бұрын

Thanks for your support and comments !!!

@rescuedandrestoredgarage Жыл бұрын

Dang batman that's wild to see so much of the car apart and to puzzle this car back together and how much time it takes and the patience and dedication to detail I truly appreciate your skills brother 👍.

@guzzifabrication3448 Жыл бұрын

A lot of baby steps....

@rescuedandrestoredgarage Жыл бұрын

@@guzzifabrication3448 big time brother that's what happens so many people start and then it get so huge, people do not know where to start so then get frustrated and lose interest then let the ride rot or sell it

@guzzifabrication3448 Жыл бұрын

@@rescuedandrestoredgarage Yep...

@sicvee 2 жыл бұрын

Good job

@Cheez1979 2 жыл бұрын

Oh man I’ve been waiting for a trunk pan replacement. That’s where I’m at right now. Definitely PPE PPE !! …great advice. Can’t wait for more !!

@guzzifabrication3448 2 жыл бұрын

I know a few guys that lost an eye, work related..... I had one injury myself, out for 3 months..... I will be avoiding that in the future....

@derrickwebb7230 2 жыл бұрын

Dying to see the trunk removal

@miguelesparza2913 2 жыл бұрын

Great job you can make a shop couch with the scrap rear quarter panels of 62

@guzzifabrication3448 2 жыл бұрын

Good idea !

@darrenhebert8740 2 жыл бұрын

Nice job. great video. Waiting on the next one. Thanks !!

@guzzifabrication3448 2 жыл бұрын

Thanks !

@blue32nu 2 жыл бұрын

Was this ever finished? I'm at the edge of my seat waiting for ep 12

@guzzifabrication3448 Жыл бұрын

getting close...

@kobra_style 2 жыл бұрын

The owner definitely hired the right guy for the job!

@guzzifabrication3448 2 жыл бұрын

Thank You !

@ibjwez4601 2 жыл бұрын

You deserve more views. Nice job.

@guzzifabrication3448 2 жыл бұрын

Thanks !

@scoobbdoobdoo 2 жыл бұрын

Are you doing part 12 installing qtr panels??? Doing a great job

@guzzifabrication3448 2 жыл бұрын

Yep

@jimsullivan2729 2 жыл бұрын

Great video series. I'm replacing pretty much all of the same sheet metal on my 62. The only difference is I'm using a good frame with new mounts to hold the body.

@guzzifabrication3448 2 жыл бұрын

That's a plus ! Thanks for watching !

@cesaralcantar2843 2 жыл бұрын

I replaced the frame on my 63 to bro the old one was shot out no good,im replacing just about everything the same like guzzi,

@samuelsmith2522 2 жыл бұрын

Awesome video ! Wow you just cut the back half off!!!!

@guzzifabrication3448 2 жыл бұрын

We'll put it back !

@mikebeyersdorf5270 2 жыл бұрын

Very clear videos with excellent narration. This is really helpful. Thanks for sharing your technique. I did do some body-bending in my youth and hope to get back into it once I get the garage space. I'm hoping to tackle right side rear quarter replacement on my 67 Malibu. I'm pretty happy with the rest of the body. This series gave me a little more confidence to tackle that. Do you have some videos of your hammer and dolly techniques?

@guzzifabrication3448 2 жыл бұрын

Thank you! You can absolutely tackle your 67, if you run into anything message me.

@cesaralcantar2843 2 жыл бұрын

You are one awesome dude,don’t mean that in a weird way or anything but you just do a bad ass job all the time I’m doing the exact same thing to my 63 impala it’s in the same condition that the 62 your working on is so your videos help me out a lot brotha thank you keep up the good work if I have any questions hopefully it’s ok to reach out to you for some advice brotha,,👍

@guzzifabrication3448 2 жыл бұрын

That's why I make these videos to help other people.... if you have questions always ask. Thanks for supporting the channel

@cesaralcantar2843 2 жыл бұрын

@@guzzifabrication3448 thank you brotha,

@Jtamerler 2 жыл бұрын

👍🏻

@guzzifabrication3448 2 жыл бұрын

Thanks !

@tepp4083 Жыл бұрын

At the 6:50 mark, you can see the spacing, which is between the floor and inner wheel well. How did you close up that spacing?

@guzzifabrication3448 Жыл бұрын

Keep watching the series..... Thanks

@davidskaar3232 2 жыл бұрын

I'd like a working display in a mall with seats if people like me would want to watch. Maybe an audience would be distracting.

@guzzifabrication3448 2 жыл бұрын

That's awesome! Thanks !

@tonyb9787 2 жыл бұрын

Hey did you have to weld some square tube to make a X frame to hold the car in place while you weld a full floor pan? I have a 66 impala and I'm not sure if I have to do that before I take the full floor apart.

@guzzifabrication3448 2 жыл бұрын

Check out : kzfaq.info/get/bejne/oq5joNOQsJjSf30.html

@douglascygan3237 Жыл бұрын

Thank you for doing such a wonderful job with your videos, I've learned a lot. I'm restoring a 1965 GTO and it needs a new full floor and firewall. Is it best to replace the floor first and then the firewall so that the original firewall can be used to help properly align / locate the exact position of the new floor, or should the new firewall be installed first using the original floor to help align it?

@guzzifabrication3448 Жыл бұрын

Thank you Mr.Cygan ! Install the floor first.

@douglascygan3237 Жыл бұрын

@@guzzifabrication3448 Thank you Robert for your reply!

@douglascygan3237 Жыл бұрын

@@guzzifabrication3448 Out of curiosity, your plug-welds come out looking great, mimicking factory resistance welds. Do you set you mig amps higher with an increased feed rate, or do you use other setting? I have a Millermatic 140.

@guzzifabrication3448 Жыл бұрын

@@douglascygan3237 Yes setting are increased, I would suggest practicing different setting on your machine on scrap 18-20 gauge.

@guzzifabrication3448 Жыл бұрын

@@douglascygan3237 No problem.

@jaimeaguilera8310 2 жыл бұрын

Hows it going very good videos brother im working on 64 impala convertible I'm trying to find out if they make the back section on the outer rocker

@guzzifabrication3448 2 жыл бұрын

Thanks, try summit racing for that part

@jasons9789 2 жыл бұрын

Nice work! Im doing a 60 Impala right now. Any tips on where to get replacement quarters and rockers etc? I thought Classic Industries but theyre not much help on a 60. Any help would be greatly appreciated!

@guzzifabrication3448 2 жыл бұрын

Don't want to be the bearer of bad news.... depending on what your looking for there isn't alot of aftermarket parts being made for a '60, I did one a couple of years ago and ran into real issues finding replacement parts, it was limited to complete floor pan, trunk, rockers, quarter panel patches ( no full quarters ) out side of those parts, good luck......

@jasons9789 2 жыл бұрын

@@guzzifabrication3448 Thanks for the response. I have a few ads out there looking for used parts. Im not in a rush, doing the chassis and drive train first. I have a 63 Impala SS I was gonna start on first but couldnt find the transmission I wanted for a reasonable price so I tackled the 60 instead. I will keep checking out your videos. Thanks!

@isaacrosales3434 2 жыл бұрын

Where’s the next video?? These are so awesome!!

@guzzifabrication3448 2 жыл бұрын

On hold, unfortunately the owner pulled a Houdini.....

@isaacrosales3434 2 жыл бұрын

@@guzzifabrication3448 oh man. So much work put in! My 62 needs rocker work and seeing your videos gave me motivation to get it done! You do awesome work!

@guzzifabrication3448 2 жыл бұрын

@@isaacrosales3434 That's awesome! hey get to work !

@AC-uu3gj Жыл бұрын

How many hours was it for the floor pan and rockers and many more for the trunk and quarters

@guzzifabrication3448 Жыл бұрын

A lot....

@mrgreezy1 Жыл бұрын

Question… would it have been easier to get the floor installed in sections verses on big piece ? Maybe those rolled up sides would not have been an issue that way ? Just a thought…

@guzzifabrication3448 Жыл бұрын

You mean cut a one piece floor pan up? easier and cleaner to repair the damage.

@mrgreezy1 Жыл бұрын

@@guzzifabrication3448 no, I thought when you buy panels they give the option to but them in sections.. but you made it look easy sir.. you do great work. 💯

@mrgreezy1 Жыл бұрын

@@guzzifabrication3448 no, I thought when you buy panels they give the option to but them in sections.. but you made it look easy sir.. you do great work. 💯

@guzzifabrication3448 Жыл бұрын

@@mrgreezy1 Thanks for following the channel and your support !

@LILGIBBYPRR-ESR 2 жыл бұрын

What is the metal Guage in oem quarter panel? And what Guage is the after markets

@guzzifabrication3448 2 жыл бұрын

18 to 20 ga.

@55ledsled25 Жыл бұрын

Robert, what is the model # on the Dewalt cutoff tool you are using. Does it use the 20v battery? Thanks!

@guzzifabrication3448 Жыл бұрын

DEWALT FLEXVOLT 60V MAX* Angle Grinder with Kickback Brake, (DCG414B I love it.....

@timfranklin8352 2 жыл бұрын

great video, doing a 62 convertible may i contact you about replacement panels?

@guzzifabrication3448 2 жыл бұрын

Thank you for watching, yes I'd be happy to speak with you

@claywilliams7442 2 жыл бұрын

where is part 12 I can't find it?

@guzzifabrication3448 Жыл бұрын

Go to the playlist, part 18 is coming out Friday

@rajrammbbs 2 жыл бұрын

where's the rest ?

@guzzifabrication3448 2 жыл бұрын

Owner put on hold for the moment, we'll start back up in a month or two, thanks for watching !

@juliosandoval8244 8 ай бұрын

I hope the the owner of this 62 impala has fat pockets to just pay for metal fab.he should just bought a solid shell ready for prep n paint for under 7k

@bbss9295 16 күн бұрын

it is waste of time. The decision to restore this car was not right.

@guzzifabrication3448 16 күн бұрын

@@bbss9295 I guess the owner thought differently...... did you see the last video, the finish out?

@bbss9295 15 күн бұрын

@@guzzifabrication3448 I had watch all the videos from the day one and then put my comment.

@bbss9295 15 күн бұрын

@@guzzifabrication3448 I think such cars should be stored in a covered roof rather than an open space.

@guzzifabrication3448 15 күн бұрын

@@bbss9295 That would be nice !

@guzzifabrication3448 15 күн бұрын

@@bbss9295 Ok

@davidskaar3232 2 жыл бұрын

Watching a procedure I couldn't do. But it would be.nice to be rich to support the art of restoration and teaching new students. Always want the youth to learn such a great artform.

@davidskaar3232 2 жыл бұрын

Watching a procedure I couldn't do. But it would be.nice to be rich to support the art of restoration and teaching new students. Always want the youth to learn such a great artform.