1963 Triumph Tiger Cub British Motorcycle Restoration # 1

Рет қаралды 426,123

Жыл бұрын

Some Months Ago, I found this Amazing British Beauty of 1963... "A Triumph Tiger Cub". As We Found it, I immediately purchased this from an Old School Uncle and took it to my Garage. And Now, This is the Time for what I was waiting, We started an Amazing Restoration of this Enchanting Beauty. Its a 4 Stroke 200cc Motorcycle, I can't Imagine ! So, I Hope you also Love this beauty.
I also want to tell you that I'm Really very thankful for every single supporter of us. Also give me feedbacks, after watching the video. In the End, I wanna thanks you again for watching this video.
Also Watch our Other Videos:
Full Restoration 60 years Old 1962 Vespa Scooter
• Full Restoration 60 ye...
Full Restoration 40 Years Old ruined Classic Motorcycle
• Full Restoration 40 Ye...
Making an Electric Bike of Future from Scrap motorcycle
• Full Restoration - Scr...
Turning a Vintage Motorcycle into an Incredible Cafe Racer | Full Restoration
• Turning a Junk Motorcy...
I did my Best in this Video. So, If U like this Video, Please Give a Thumbs Up and Give us Suggestions and FeedBacks in the Comment Box.
Do Subscribe to Encourage Us :
kzfaq.info...

Пікірлер: 142

@mrofnocnon Жыл бұрын

The cub was my first legal motorcycle, loved it and it sounded beautiful, like all Triumphs.

@arminiusgaming1991 Жыл бұрын

This is called actual restoration ❤️❤️❤️

@bruceg.6282 Жыл бұрын

I had a 1976 Triumph Bonneville 750 when I was in college and I still miss it.

@thomaspridmore106 Жыл бұрын

Lovely bike never a problem memories

@classicandclassymotorcycle Жыл бұрын

Great Job

@muhammadsalman6810 Жыл бұрын

Good

@sefton1972 Жыл бұрын

Absolutely top drawer restoration. Mesmerising. Looking forward to the next segment.

@martinschranner3495 5 ай бұрын

The most work went into this bike before the restoration. Beautiful job with the patina!

@re-fix9678 Жыл бұрын

Good video👍

@cedricletourneur5980 Жыл бұрын

MERVEILLEUX!!!!

@nayeemshouvon Жыл бұрын

Great job!

@nathanh3515 Жыл бұрын

These restorations are amazing. Real restoration!

@UmairDawood786 Жыл бұрын

All time favorite restoration channel

@MISSION315 Жыл бұрын

My first bike in 1971 which I also rebuilt, fantastic to see this restoration takes me back 51 yrs, you have great talent shown on a brilliant job on this project many thanks

@raymondsanderson3768 Жыл бұрын

Black paint straight on bare metal? No primer?! And comments say top professional job!!

@andreasryden334 Жыл бұрын

agree! sloppy work 👎🏻

@beentheredonethat6885 Жыл бұрын

My thoughts exactly. Plus wrong welding technique, wrong choice of tools etc. Making it more difficult to do the job properly next time. Sad.

@OtherSarah2 Жыл бұрын

@@beentheredonethat6885 this is how kids do things now. The powder-coating went on right over rust still in the axles.

@lolcec81 Жыл бұрын

Комментарий в поддержку канала и ролика, а также труда мастера.

@edwardnorton318 Жыл бұрын

Awesome sir...next episode ❤️❤️🙏🏻

@venenareligioest410 Жыл бұрын

Excellent job 👏🏻👏🏻👏🏻

@gabrielday9519 Жыл бұрын

Wow this is awesome!! I can't wait for the next episode!

@TheSpencer1982 Жыл бұрын

I’m more amazed that he found a side points model with tank badges still intact. Well done!

@trevorlewistapp8001 Жыл бұрын

I had a 59 tiger cub which I bought in 63 on leave from the merchant navy,it was a great little bike.

@meyawabdulaziz3863 Жыл бұрын

its beautiful even in its decayed shape

@fabfafa Жыл бұрын

Excellent work 👏👏🇨🇵

@ALONGDAFY Жыл бұрын

Good job brother , your my inspiration 😎💪😍

@masbrodaddyoutube4481 Жыл бұрын

Do what you love, and love what you do....wawww awesome bro...,,

@Mo_G Жыл бұрын

Good job

@technicalmiller Жыл бұрын

You did such a great job! Keep posting more videos.

@hooman8191 Жыл бұрын

cool motorbike

@akhtarkhankhan3207 Жыл бұрын

Triumph motorcycle one of the best bike on that' time it's used in Army's porpoise you guys I like your work well done 👍

@muhammadsajjad7356 Жыл бұрын

niceeeee❤️❤️

@MySteaming Жыл бұрын

I remember the Cub well. Although only 200cc, it produced a great bark from the exhaust. However, physically it was a tiny bike & anybody over 5' 8" riding it looked like a Circus Clown riding one of the tiny 2 wheel miniature bicycles.

@441rider Жыл бұрын

Just did a BSA fender the opposite direction LOL!

@highdownmartin Жыл бұрын

Dragged out a pond by the looks of it. !

@davebarrowcliffe1289 Жыл бұрын

Great project! Lovely bike!

@AbdulHafeez-cq6oo Жыл бұрын

good

@grammybear4226 Жыл бұрын

🐼 Big Panda Bear Hugs from a 69 yr old grandma in Texas, USA. 🐼 ❤ 🎀 👍 🧚‍♂ 🐈 🧚 🍀 💐

@internetpeople6113 Жыл бұрын

I wished I had your skill

@bobstevens9040 Жыл бұрын

Great job Sir! I used to have one of those. Great little motorbike , well worth restoring.

@stonerdoom3481 Жыл бұрын

Fantastic, im looking forward to the next episode,i have been considering doing a full restoration on a triumph tiger cub,or a bsa bantam,something easy,to do on my days im not at work.

@pault8470 Жыл бұрын

Brilliant

@mrsmith4662 Жыл бұрын

What a super rare find. Most of these have been well gone for over 40 years, at least. This is going to be a gem and worth restoring (dare I say not all are worth the time, effort and expense, e.g. some common, old, small capacity Japanese bikes).

@bruceg.6282 Жыл бұрын

One of my friends had a Kawasaki KZ 900 back in the mid 70s and it was so big and fast I was scared of it 😳.

@MotoProject353 Жыл бұрын

I leave likes and subscriptions 👍💪

@jasonjordan1936 Жыл бұрын

good job

@hefy2jefy Жыл бұрын

My first motorcycle, I was 16. I have owned many motor cycles since 1965, I am sorry to say that my Tiger Cub was the worst bike I ever owned, the electrics were dreadful, it kept wearing out big end bearings, and it leaked oil all over the place, just like almost every British bike of that era. Great video though! Thanks!

@howiekeegan8804 Жыл бұрын

Me too, bought a touring cub in 1969 and that lasted 6 months before the big ends went. My local motorbike shop had an old trials cub going for £25 which was cheaper than getting the ends done so I basically bought that and swapped the number plates over. The trials Cub was great with a 54 tooth rear sprocket - great for fast getaways but only a top speed of about 60! Great fun, had the mushroom points which you could turn whilst driving!!.

@shehryarhassan Жыл бұрын

♥️♥️♥️♥️💐💐💐💐♥️♥️♥️♥️

@Ungal_nanban_Harish Жыл бұрын

Ur back bro after a long time

@framolon3708 Жыл бұрын

no primer on the bare metal?

@joegardiner4220 Жыл бұрын

Ocean find

@carrestore Жыл бұрын

good job 👍

@bryanduncan1640 Жыл бұрын

At last, a restoration job where the finished project stands a chance of being worth more than the cost of the spares that it took to rebuild it!

@bb-ballistics1706 Жыл бұрын

Most people don't restore stuff to make money or turn a profit. They do it for the fun and satisfaction..it's also a great way to get to know your bike inside and out.

@irzanhaziq0674 Жыл бұрын

Part 2 please

@woutersere7796 Жыл бұрын

Awesome vid, love the restoration but also how you did the video. What makes you decide between powder coat or paint job ?

@pintokitkat Жыл бұрын

I had a Cub in 1971. I think it was from 1959 registration MRA123. It was unreliable and I didn't have the money, skill or intelligence to fix it properly, but I loved that bike.

@JR-bj3uf Жыл бұрын

I would never have the courage to restore a bike that had caught fire.

@austin12ascot Жыл бұрын

How about some undercoat?

@blackjohnson561 Жыл бұрын

Painting directly without primer ?

@w4ln414 Жыл бұрын

Next part 2 and final

@djfoxalaska Жыл бұрын

I had a 1960 Tiger Cub scrambler. 16 hp and 200 cc. Had a lot of fun riding it, but the Honda 150 cc was faster.

@swansong007 Жыл бұрын

Great video. Enjoyed tremendously. How often will you be posting videos on the project.

@jez6208 Жыл бұрын

No primer?

@smilymanoj Жыл бұрын

AFTER LONG WAITING THE VIDEO IS BACKK ❤️❤️❤️

@mjspice100 Жыл бұрын

I love watching these videos but two things stand out.. first you use chemical paint stripper rather than sand blasting which seems to me to be quite an inefficient way to do it. Second you seem to have spray painted directly onto the bare metal of the frame without a coat of primer?

@MotoGera Жыл бұрын

Кислотный грунт? Не, не знаем😳😳😳

@NickVass1000 Жыл бұрын

why are you using metric spanners?

@MotoProject353 Жыл бұрын

Great movie and great project. Work done at a high level 😉. Try to apply putty on the base, not on bare metal, as the putty has no anti-corrosion properties. I am also trying to restore something and record it. Can you tell with what you record movies?

@martinfortune9988 Жыл бұрын

Right I’ve just started watching this and it’s proper not possible . I’m watching closely

@bonniechops1 Жыл бұрын

Where is part 3 final build?

@denu80 Жыл бұрын

I was literally thinking that the old owner of this bike did burnouts!

@MichaelandCathy1999 Жыл бұрын

NO PRIMER before painting?! That won’t take long to rust again.

@igniscarn19 Жыл бұрын

how do you know the complete engine build? did you graduate from any special mechanical school?

@RobbieRocksWell Жыл бұрын

What final cost would you say to do this restoration?

@andrewneeds8189 Жыл бұрын

Takes me back, forever trying to fix the leaky pushrod tube…

@ZygmuntKiliszewski Жыл бұрын

Professional and precise work, congratulations 👌.

@ZygmuntKiliszewski Жыл бұрын

Thank you 😀. I replied by e-mail to the question (12.10.2022).

@sauravverma7642 Жыл бұрын

@@ZygmuntKiliszewski sir where are you from?

@ZygmuntKiliszewski Жыл бұрын

@@sauravverma7642 Poland, also look KZfaq!

@frankmarkovcijr5459 Жыл бұрын

It cost just as much to restore a small bike as it is a big one. Therefore you will not gain your initial investment back with a smaller bike. Still it's nice to see one brought back from the dead.

@davebarrowcliffe1289 Жыл бұрын

That's a bike worth restoring. It's not always about the money, amirite? ☺

@keithmoore5224 Жыл бұрын

@@davebarrowcliffe1289 iv said the same for years i restored a honda cb 500 twin adout 20 plus years ago new old stock parts were available my friends said a waste of time and money i got the bike for nothing take it away 4 years ago i got my money back plus used it on sunny days just saying it’s something worth waiting

@thomascatford2627 Жыл бұрын

How to stretch a video three times the length it could have been😂😂

@pradeepramesh7702 Жыл бұрын

Bro can u please tell me your location that i can restore my bike, I just stunned of ur vdos!!

@somiali7122 Жыл бұрын

@rcreynolds6186 7 ай бұрын

No primer on the frame?🤔

@devalkeyes Жыл бұрын

Why the use of metric spanners and no primmer with the paint

@peterduxbury927 Жыл бұрын

In 1964, I owned two Triumph Tiger Cubs, and both of them were runners - of sorts! These bikes with the Unit Construction engine - just had to be the worst machine that Triumph sold in the UK! The Alloy Casings could not remain tight (or even oiltight). Threads in the Alloy Crank Case (both sides) became stripped - out!! When one Cub broke down, I had a 'second' machine, and simply switched over the number plates. It was the only way that I could get to work, always on tenterhooks wondering if I would make it home again. They just had to go...........

@andrewkerr3836 Жыл бұрын

Where's the video of the finished bike? 🤔

@adgjhdcfbh8028 Жыл бұрын

Will you sell it

@pannelal2536 3 ай бұрын

Bhai yek hame gari chahiye

@michaelnelson9140 Жыл бұрын

What type of paint stripper did you use?

@michaelnelson9140 Жыл бұрын

No, not a thumbs up! I want to know, what type of paint stripper did you use?

@steveburton2806 Жыл бұрын

Why would you paint before a dry build?

@jumpfortyfour9965 Жыл бұрын

ware is part 2 on utube

@davidatkinson3887 Жыл бұрын

Can't believe that once the wire wheel was used , there was no sign of primer or undercoat, just bare metal nor was it shown the inside of the fork shrouds/ inside of front and rear spring coils been cleaned.?. Otherwise nice resto.