1971 Honda CB350 Leaky Carb Fixed & Ride

Рет қаралды 3,298

7 ай бұрын

1971 Honda CB350 Leaky Carb Fixed & Ride
In this episode we finish the 1971 Honda CB350 and take it for a ride. We fix the pesky leaky carb. Ut wasn't the usual suspects. Then we give it a tune-up. Adjust the cam chain tensioner, check the valve clearances and set the ignition timing. After all that we change the leaky rear tube then take it for a ride.
Don’t forget to like, comment, and subscribe for more updates on this build and other motorcycle adventures. Let's get rolling!
⬇️Get your Motorcycle Rewind Gear Here ⬇️
be40a4-4.myshopify.com
Buy ANPUDS Torque Wrench
tinyurl.com/33nf8kh2
Join us on our social media channels:
Facebook: motorcyclerewind
Instagram: motorcyclerewind
Sponsorships opportunities: If you would like to sponsor our channel on contact us at motorcyclerewind@gmail.com and put the word "Sponsorship" in the subject line.
All music by Bensound
Two Wheels and Deals
www.twowheelsanddeals.com
For Aftermarket Parts
www.speedmotoco.com
For OEM parts for your Vintage Motorcycle
www.cmsnl.com
In southeast US and need service or parts visit
www.hurricanevintagecyclework...
Viking Bags Motorcycle Luggage
www.vikingbags.com
F40 Jump Pack
www.jfegwo.com/products/f40-4...
Use Coupon Code - REWIND and save 10%

Пікірлер: 44

@davebarrowcliffe1289 7 ай бұрын

1969 Owners Manual tells you how to set the valve gaps. 2023 Owners Manual tells you not to drink the battery acid...

@motorcyclerewind 7 ай бұрын

Dave that is so funny😂 and unfortunately true 🤷‍♂️. Thanks for watching.

@MaryK4242 Ай бұрын

Rewatching this. Now that I just disassemble my very first cab I now know what / where retainer clip is. 👍🏻

@motorcyclerewind Ай бұрын

Are you talking about number 5 in this pic. images.cmsnl.com/img/partslists/honda-cb350-general-export-e-17-18-carburetor-keihin_big3IMG01175067_1d46.gif

@Mike-cp3xr 5 ай бұрын

Had this exact bike. Rode it every day. Miss it.

@motorcyclerewind 5 ай бұрын

Such great motorcycles. Thanks for watching.

@abdulazizsaleh8650 5 ай бұрын

Buy one again..and enjoy it 😊👍🏻

@bigrockauto 7 ай бұрын

360 camera is great!!

@motorcyclerewind 7 ай бұрын

It’s a GoPro Max I love it. Thanks for watching.

@yomommaahotoo264 4 ай бұрын

Helluva lot easier adjusting valves on those than most modern bikes for sure.

@motorcyclerewind 4 ай бұрын

You are so right.

@ganzillareactions9825 6 ай бұрын

lol I bought my first Harley 1993 FatBoy and had it serviced and ready for a poker run. I filled up to start the run and probably 100 miles into the run I ran out of gas 🙄 I just filled it up, I remember when I was filling up I went to open the left fuel tank and I went to open it and it would just click. Thinking this must be a dummy cap!!! lol Come to find out it had left handed threads. Pretty stupid I know!!! We live and learn!!! Keep it on two wheels and love the wind therapy brother

@motorcyclerewind 6 ай бұрын

Sometimes it’s the little things. Thanks for sharing.

@TheRattyBiker 7 ай бұрын

"A" way can often be "the" way 👍 Love watching your troubleshooting posts, glad the carb was just an upside down clip 👍

@motorcyclerewind 7 ай бұрын

Me too!!! You can see how this could easily be overlooked. Thanks for watching.

@grahamwright9897 7 ай бұрын

Awesome as always

@motorcyclerewind 7 ай бұрын

Thanks Graham. Really appreciate you watching.

@jefftuckercfii 7 ай бұрын

If there's multiple ways to get something done, that's great! Just more tools for your toolbox. And you don't need to 'splain accidentally throwing out something, even a wiring harness. Done the same thing myself, more than once. That's why I don't throw anything out that came from a vehicle of any kind that I've worked on. You never know what you can use in the future.

@motorcyclerewind 7 ай бұрын

Agreed. Stuff just happens at time. Thanks for watching.

@mabarbe9545 7 ай бұрын

Great sound!

@motorcyclerewind 7 ай бұрын

Stock pipes are a great sound. Thanks for watching

@markhinde6187 7 ай бұрын

Another great informative post, love the positivity when sorting all the niggles out on these older bikes..

@motorcyclerewind 7 ай бұрын

Absolutely!👍 thanks for watching.

@Warrior6504 7 ай бұрын

I did the same thing with the clip upside down on my 1986 Kawasaki el250 I also fitted a fuel filter and it runs great now.

@motorcyclerewind 7 ай бұрын

I think it’s an easy mix up. Glad you got your el250 sorted. Thanks for watching

@billyparrott1995 7 ай бұрын

As always Eric Awesomr informative,great video Love your work..

@motorcyclerewind 7 ай бұрын

Billy, thanks for watching.

@Ethanh-fd7hv 7 ай бұрын

I messaged you on Facebook about the Cl350

@Ethanh-fd7hv 7 ай бұрын

Please let me know something I'd like to check it out this week if possible

@topwaterwes2339 7 ай бұрын

👊

@motorcyclerewind 7 ай бұрын

Thanks for watching.

@FightFilms 7 ай бұрын

Why dis they put cooling fina on the pipe next to the cylinder? Or, why is it beneficial to cool that small section of the exhaust?

@motorcyclerewind 7 ай бұрын

Those are the exhaust clamps. Who knows why the put fins on them. Thanks for watching

@cletisec30 5 ай бұрын

What stick/mount are you using for your camera on the bike? I'd love to get some footage like that

@motorcyclerewind 5 ай бұрын

The camera is a GoPro Max and this mount. amzn.to/4bdiHJh the pole I made from a Swifter mop handle. It’s about 30 inches long.

@darkcustomxxx7252 7 ай бұрын

The beauty of older bikes, we can fix them with the minimum of tools anywhere and at least get home. Modern bikes, just leave them on the side of the road and walk away because you have no hope in hell of sorting out some stupid CPU without a NASA facility in tow. Don't worry about it being stolen, thieves can't get them going either.....

@motorcyclerewind 7 ай бұрын

Agreed. I will take a set of pints and drum brakes any day. Love stuff I can fix in the side of the road. Thanks for watching.

@johnl5974 5 ай бұрын

How hard and expensive is it to find parts for decades old motorcycles? I was a p/t bike mechanic for a few years. My boss said he could get (expensive) Honda parts but Yamaha didn't support spare parts for their machines after about 10 years.

@motorcyclerewind 5 ай бұрын

It is not as difficult as you might think. Plenty of reproduction parts and still lots of NOS parts out there. Not to mention used parts. It really depends on the model. Thanks for watching.

@davebarrowcliffe1289 7 ай бұрын

"He-Man": Worst. Haircut. Evar.

@motorcyclerewind 7 ай бұрын

😂😂😂😂 his barber did not have the power.

@davebarrowcliffe1289 7 ай бұрын

@@motorcyclerewind He had the power to make him look like a 'big puff,' as we say in my part of the world... 🤣 😂 🤣

@bananabrooks3836 7 ай бұрын

Some drivel spoken here. 2,3,4,5 thou, who cares what the manual stipulates when it's all 'super simple'. Throwing away looms you've spent money on?Super simple is, as super simple does.

@motorcyclerewind 7 ай бұрын

Thanks for watching.