1995-2011 Ford Ranger 2wd front brakes and bearing pack

Рет қаралды 41,747

4 жыл бұрын

How to pack bearings, and do a brake job on a Ford Ranger. Also the same rotors for 1995-2001 2wd Explorer, and Mercury Mountaineer.
Disclaimer:
Due to factors beyond the control of Rust Belt Auto, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Rust Belt Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this video at your own risk. Rust Belt Auto recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Rust Belt Auto, No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 41

@jasonsmith3726 4 ай бұрын

I was almost just one of them idiots that was about to order cross drilled slotted rotors for my ranger. My front brakes are toast right now and I wanted to put whatever brake setup is gonna be most cost effective for me and last the longest. Thank god I saw your video because I would be pushed if I had to replace my brakes in a year. I have a 2003 ford ranger edge 3.0 that I have kept bone stock but I keep it looking almost brand new. I may be crazy but the ranger is my dream truck. I have always loved them. It does everything I need and it’s not a complete gas hog because it’s a v6. I also love the way they look. I have what is considered the super cab which has the half ass folding back seats but no regular sized person is fitting back there. Anyway thank you for sharing your knowledge and fro saving me from wasting money and a future headache

@michaelaguirre1084 Жыл бұрын

Good job brother I like the way you talk and think. 5.27.2023 Ⓜ️✌️

@ThunderbirdRocket 2 ай бұрын

Extraordinary detail ! Super helpful !! I learned lots !!! Thanks mate . 👊🏼 🔥

@zman4539 3 жыл бұрын

Good to see a video with step by step and helpful hints from an experienced wrench bender! Getting ready to do brakes on my 08 Ranger sport and wanted a quick review - the vid was perfect!

@pg6417 3 жыл бұрын

really good job of showing the process--especially the cleaning of calipers and such. thx

@PhamVans 4 жыл бұрын

Spinning the wheel while micro tightening the bearing nut is key. You want the hub assembly to sit firm but obviously not pinched too tight to avoid burning out all the grease.

@Rolo-Tony 2 жыл бұрын

Nice and informative. To the point - thank you!

@RustBeltAuto 2 жыл бұрын

😁

@dirtydavesgarage8251 Жыл бұрын

Nice work, well done!

@catdakman1273 3 жыл бұрын

Excelent job of packing bearings.......!!!! Thumbs up !!!

@RustBeltAuto 3 жыл бұрын

This is something grandpa should have taught everyone.

@johntriplett5407 3 жыл бұрын

Enjoyed this video .......so helpful !

@mikedonovan7776 Жыл бұрын

Very good video ..

@Tcpjamr Жыл бұрын

The problem with the pad’s being chewed up isn’t the rotors it’s the pad those organic ones chew up easily the ceramic wear better with the drilled and slotted rotors

@tylerw1774 4 жыл бұрын

Great video!!!

@RustBeltAuto 4 жыл бұрын

I believe you.

@BarnStangz 4 жыл бұрын

.....Don't let anything hit the ground he says... But you're right man, get some grit in there and your bearings will be toast in now time... Some good tips for sure. Pretty funny how you see those pads on a bike ride. It's honestly amazing how many people neglect brakes on a car. I see orange rusty shit on the sides of cars all the time and I know it's because their brakes are ready to fly apart and kill someone... OKAY BYE!

@joseromero2392 3 жыл бұрын

first timer, very helpful!

@chadtuinman5743 3 жыл бұрын

very very good video. Funny guy too.

@renfredful 3 жыл бұрын

Thanks good video

@RustBeltAuto 3 жыл бұрын

Welcome! What little I can do.

@derekinbritishcolumbia1449 Жыл бұрын

Torque spec for the caliper carrier??

@dam4274 2 жыл бұрын

Finally found your video after seeing nothing but 4wd bids. You sped through the removal of the carrier bracket. Using a 1250ftlb Milwaukee impact the top bolt will not come out! Aren’t the bolts the same direction?

@RustBeltAuto 2 жыл бұрын

The caliper support bracket can be a bear sometimes. Might be time for 1/2" breaker bar, and a jack pole.

@BH-gh6qm 6 ай бұрын

how do you know if you need to do the bearing pack on top of new pads. Or do you do the bearing every time you change brakes ?

@RustBeltAuto 6 ай бұрын

You should. You really don't know if it needs to be done, until it is too late.

@BH-gh6qm 6 ай бұрын

ok thx@@RustBeltAuto

@CatNaps33 3 жыл бұрын

Thank you sir 🍻

@lucaswade6415 3 жыл бұрын

What size socket does it need?

@RustBeltAuto 3 жыл бұрын

If I didn't mention it in the video, I dont know.

@shaneatl 3 жыл бұрын

1 1/16" or 27mm. You can use the socket to seat the races if you replace them

@joephillips3472 3 жыл бұрын

220. 221. Whatever it takes

@johnovegas 9 ай бұрын

caliper hanging on the brake line like a Pro.

@RustBeltAuto 9 ай бұрын

It's built Ford tough.

@1Patient 3 жыл бұрын

LOL 9:43 "metric guys"

@jimakard5619 3 жыл бұрын

95 only 95 has rear wheel ABS only will that Exciter ring work on a 95 ABS sensor ring will that work on a 95?

@1Patient 3 жыл бұрын

@@jimakard5619 Thanks for info. Appreciate it.

@ultimajp 2 жыл бұрын

"these People" What does he mean by that ???

@RustBeltAuto 2 жыл бұрын

Different strokes for different folks.

@antoniovillarreal5756 2 жыл бұрын

Hay did he forget to install a grees seal

@RustBeltAuto 2 жыл бұрын

I did not forget.