1997 - 2000 Dodge Dakota/Durango Radio Install
Рет қаралды 153,223
7 жыл бұрынParts linked in the description below!
Watch a full tutorial as a 2000 Dodge Dakota (with or without the Infinity System) will have a Kenwood KDC-400U Single Din Radio installed. Please note this installation is identical to a Dodge Durango SUV.
This video applies to Dodge Dakota / Durango models for years 1997, 1998, 1999, and 2000. This video also includes dash trim and stereo removal, complete installation, wiring, and testing.
Click here for the front door speaker install on this Dakota:
• 1997 - 2000 Dodge Dako...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Other Parts Used (Amazon Associate Paid Links):
*Kenwood KDC-400U Single Din Radio
*Metra 70-1817 Wiring Harness Adapter: amzn.to/2T2NSnu
*Metra 99-6229 Stereo Dash Kit Adapter: amzn.to/3zCafjh
*Metra Axxess ASWC-1 Steering Wheel Control Module: amzn.to/3ilRprp
Disclosure: As an Amazon Associate I earn from qualifying purchases
@ProvoBeastAudio 2 жыл бұрын
Parts linked in the description of the video!
@elite9519 5 жыл бұрын
Very helpful video thank you. The close up on the black and green ground was all I really needed. There are common forums online where people wire they're grounds to the dimmer which causes light issues in the cab. Had no idea that was the factory ground. Thank you
@d_dizzie_druck5753 4 жыл бұрын
Glad i watched this before tearing into mine, i would have thought there for sure would be screws in the bottom of that dash bezzle😂
@TheHamilton66 5 жыл бұрын
You guys made it so easy for me!!! Thanks so much for the help with this!!!
@chrisearley3765 25 күн бұрын
THANK YOU COULD NOT FIGURE OUT THE GROUND WIRE, THE OL DODGE IS ROCKIN. WOOOOOOOOOOO
@ninjapanda857 4 жыл бұрын
Thanks for this it help me understand how to wire my 96 dodge ram
@sunlikemedicinec.w.b8141 3 жыл бұрын
I bought my buddy's 98 dakota off his mom after he passed in 2012 just now finally getting to restore it. It's hard to find body parts in good shape at a decent price
@urielhernandez4269 5 жыл бұрын
Can you please tell me which cable is the one for the swc behind the original radio ?
@solarflare4259 Жыл бұрын
Great video! Thanks for sharing. Have any idea how to remove the 36670 Infinity power amplifier? I have a defective one installed in my '99 Dakota. After removing its 2 bottom mounting screws it is still attached to the frame by its top hook but I still cannot remove it...
@YoureDoneZo 4 жыл бұрын
Is this harness for that specific stereo or can I use it for any brand stereo ?
@reidkingiii1616 4 жыл бұрын
I have a 99 dodge dakota slt and I have installed a aftermarket radio in it and my dash lights quit working,any idea what it might be.
@candacerutter6707 3 жыл бұрын
What is the third White clip on the cars harness that has purple wire and black and white wire?
@ThatREDNECK666 2 жыл бұрын
What is the wire that’s clipped into far right of the wires that’s slid onto tab of the radio bracket
@fox32288 4 жыл бұрын
Just need some clarification you say in the video all you need coming out of the aswc-1 is power (red) ground (black which is tied in with radio ground) and control wire (pink). But then it's looks like you add that you need the (white/green) wire for controls as well is that correct? Thanks
@adonisgoldtooth334 5 ай бұрын
Is it different wiring if I have a security system too?
@tiger21x 2 ай бұрын
So the volume is programed but does that also cover the radio channel buttons too?
@dirtrider4life50 4 жыл бұрын
What is the pink wire? I have a jvc I'm trying to hook up
@TmP45 2 ай бұрын
So there no acc mode for the radio? Like for it to stay on when car is off?
@GamemovieportalChGMP 2 жыл бұрын
I have installed my new Car Hifi Radio Din 1 and it works well, but I have now the two wires left, in violet and white, which are pluged-in at the original radio p04704383ah from Chrysler at the left side (white plug-in). You can see it at 4:04 on the videoclip. What are those two wires in violet and white for? I also have left the brown and black wire, which are on a black plug-in, also see at 4:04 on top, fixed on the metall. I guess those are to ground it. Right?
@KoKopuffs6 3 жыл бұрын
So the pink wire goes into them two wires that had the white plug on it that you cut cuz I have a 99 Durango and that's where I'm getting confused at cuz I don't have a pink wire I got the blue wire coming up to aftermarket radio that turns the amp on so what I connect that blue wire to both the wires
@helenwilliams8191 Жыл бұрын
the stereo works fine on accessories or when ignition is on, but will you start engine the radio starts losing its signal, what could be causing this ? Reply
@jasonhiggins6236 2 ай бұрын
Are the 2 wires on the separate clip .... Not the factory ground but the 2 single that plug in.. are those the steering wheel control wires? If I'm not hooking that in do I just leave them alone?
@cesarmaterazzi1857 4 жыл бұрын
Tengo una Durango 98 y duda tengo el rosa pink va con el amarillo yellow.?
@angelcabrera8630 3 жыл бұрын
How do you just install the Bluetooth radio I got a 1999 Dodge Durango 5.2 l
@gertmcmahan8390 Жыл бұрын
I got a blood and white and blue and the yellow radio in a 97 Dodge Dakota hornaday go where do they
@fireman194 Жыл бұрын
Can you put in a double din stereo in that slot?
@BigMan7o0 5 жыл бұрын
ok, so I have the kit and a head unit (no steering wheel controls though) my question is as follows: for replacing my factory 2000 Dakota head unit do I take both wire sets from the kit and literally just color match with the piece that came with my head unit, or is there anything else I need to do. I just want to be 100% sure that I dont fuck something up. also, I dont have an external amp right now, but I would *like* to essentially bypass the current subs and wire it to my own sub running off of whatever power it gives it stock, since one of the stock subs is mostly blown. is that at all possible or will that just cause havoc? EDIT: and yes I know these are probably dumb questions, but I dont know much about actually wiring this stuff, and I am 18 I cant afford to fuck something big up somehow
@robertmonahan9787 4 жыл бұрын
Thank you
@elenalyonsfan 7 жыл бұрын
Do think of the SWI-X interface might work? It says it will work with aftermarket radios that don't have the blue/yellow wire but do have a remote control which this Raptor does. By the way, in your video did you hook up the orange illumination wire to anything or the dimmer wire to anything? There were those and 1 other wire that didn't match up to anything on the Raptor's wiring harness. If all this doesn't work out I plan on getting the factory unit fully refurbished.
@ProvoBeastAudio 7 жыл бұрын
The SWI-X module works as long as your Raptor came with an aftermarket report for the radio. Worth a shot. If your radio didn't have the orange or orange / white wire, just tape them off.
@unkelfester3249 6 жыл бұрын
Thanks for the great video! I have a 99 Durango and I'm trying to install a JVC single din And just need to know exactly what color is the factory infinity Amp wire? Can't seem to find it on line!
@ProvoBeastAudio 6 жыл бұрын
www.modifiedlife.com/1999-dodge-durango-car-radio-wiring-diagram/ Factory Amp trigger wire color should be green.
@dirtrider4life50 4 жыл бұрын
Green with red stripe
@j_rock-ghostface6520 Жыл бұрын
Hi I’m in desperate need of some help. I’ve watched you video and it helped my a lot. But I have everything hooked up but can’t seem to get the sound to work
@user-iy1be6gj3k Жыл бұрын
I have the same problem with mine no sound
@K-Rivs 6 жыл бұрын
Did you get the metra aswc to retain the factory steering wheel controls? I've heard that only the PAC modules work with Chrysler's 2 wire CCD system.
@ProvoBeastAudio 6 жыл бұрын
We've gotten a good handful of Chrysler products to work with the ASWC-1. Just depends on the year and model. Metra's website will list what does and doesn't work.
@JohnNorris411 6 жыл бұрын
If I put a newer radio in my 99 durango, will I have to rewire a harness? Or is that just because you maybe used a different DIN type? I was looking to get a new radio but was hoping it would just be a quick plug and play.
@ProvoBeastAudio 6 жыл бұрын
Unless it's OEM, you will be required to wire as we did in the video.
@angelrotzell9452 6 жыл бұрын
What wires are speaker wires
@Petland101 6 жыл бұрын
My Kenmore didn't come with the metal bracket around it with the triangle mounts, just the encasement. What are the specs of that metal bracket so I can mount the dash kit onto it?
@ProvoBeastAudio 6 жыл бұрын
Head over to any car audio shop or best buy, they all have extras. They may charge you like 5 bucks for them
@richardholtel2695 5 жыл бұрын
What is that green and black wire that slides on the factory radio do you need that I need to know if I need to take that off or not cuz I'm not getting power to my radio at all
@daniellewebb7922 3 жыл бұрын
I know this was posted 2 years ago but did you figure out your issue? I have zero power going to my radio and I can not figure it out
@elenalyonsfan 7 жыл бұрын
I just added a Raptor RP-CDM3 cd player to my 1999 Dodge Dakota R/T with the original Infinity sound system. It sounds good but I didn't remember there was a separate plug for the steering wheel controls so mine aren't working. The plug that came with the Raptor CD player only had red,black,yellow,blue,white,white/black,grey,grey/black,green,green/black,violet,violet/black and there was a brown wire that wasn't used in the connector to the original radio plug as well as a couple other. Will the ASWC1 still hook up to this CD player? I hate not having my steering wheel controls.
@ProvoBeastAudio 7 жыл бұрын
As far as i can tell, your Raptor radio is not steering wheel control compatible. Unfortunately, you would have to upgrade your radio to one compatible with the ASWC-1.
@traviszimbelman9544 6 жыл бұрын
So I just finished the install, using all the same components as you have in video, but different model Kenwood with all same features. Only issue I am having is no matter how many times I calibrate the aswc-1 the steering wheel controller just won't work. And ideas? They did work with factory sterio. 99 Durango
@ProvoBeastAudio 6 жыл бұрын
Not sure, you may have to take it to an audio to diagnose. You could also try the PAC version too www.sonicelectronix.com/item_34668_PAC-SWI-RC.html coupon code ProvoBeast
@kingtony234 6 жыл бұрын
I have a 99 Dodge Durango when I install my after market radio my front left and right rear speakers only have sound coming thru. I took my time a wired it all correct. I didn’t see the problem. Any suggestions??
@ProvoBeastAudio 6 жыл бұрын
If you had the factory amplified system, sometimes when removing the factory radio, you have to be sure your balance and fader are set to center. You could have bad speakers, there still may be a wiring issue, etc. It could be a few things.
@dereklambertson8017 2 жыл бұрын
I tried to do in my dodge Dakota but it doesn't work for me
@j_rock-ghostface6520 Жыл бұрын
Hi. So I have the same brand stereo and same wiring harness but when I hook up my stereo to my existing wiring harness I get no sound what so ever.
@user-iy1be6gj3k Жыл бұрын
I have the same problem no sound
@Strange3ntertainment 6 жыл бұрын
What wiring harness would you use in a 1992 Dakota for an aftermarket radio
@ProvoBeastAudio 6 жыл бұрын
Head over to sonic electronix and use their vehicle fit guide, that will give you a list of all parts needed.
@DontDodgeIt...RamIt...Dammit. 5 жыл бұрын
Quick question. I have a a 2000 Club Cab. Now that I've got this stereo in, it plays pretty good for a while but then the deck basically restarts...like it loses power for a second. Some days it will do nothing but flash on and off. This Dakota has a factory equipped Infinity system in it. What can I do to fix this or what may I be doing wrong. Thanks in advance.
@DontDodgeIt...RamIt...Dammit. 5 жыл бұрын
I guess I should have put more details in there. All the factory wiring is still intact. The deck is a Pioneer X5710HD with the adapter harness. Although the harness didn't mention Infinity. But I read a trick on the internet to get sound through the system I had to twist 2 of the wires together. I'd had have to look to see which 2. But Along with the factory system I also have an amp and sub of my own in the back. It all seems to work fine until the deck reboots. I feel like I'm overloading something somewhere. Thanks.
@impalabigdog 11 ай бұрын
Hi I followed everything to the tee but I'm not getting any sound how do I bypass the factory amp
@ProvoBeastAudio 11 ай бұрын
amzn.to/3Q7yPEc
@thephantomrain 7 жыл бұрын
i added a kenwood into my 2000 dakota but only the radio works, no usb/cd or anything, is there something im missing that has to do with the blue and white wire?
@ProvoBeastAudio 7 жыл бұрын
Sounds like you have the factory amplified system, you need to hook up the blue solid wire on the wiring harness adapter to the blue/white wire on your radio. This will trigger the factory amp to be on all the time, regardless of the input source you are using.
@xx_reddawn_xx9346 6 жыл бұрын
What do,I do with the amp wire? Connect it to the ignition/acc wire?
@ProvoBeastAudio 6 жыл бұрын
The amp remote turn on wire connect it to the radio's blue / white wire. If not available, you can connect it into the Red ignition wire.
@bassblaster505 6 жыл бұрын
Oooooooo, White V6 5 speed, JEALOUS.
@Maniakofficial45 5 жыл бұрын
I am in need of some help. I have a 1998 Dodge Durango and I stupidly/carelessly cut off the factory wire harness and just tried putting wire to wire but the color of wires are sooo different and now im just waaay stuck. would i be able to do it like this still? and if so can you help?
@ProvoBeastAudio 5 жыл бұрын
Solder back on the original harness, or pull a stereo wiring diagram and start from scratch.
@FredFlintbedrockz Жыл бұрын
Is there a possibility you would be able to show what wires coming from the dorango going to the stereo, a little more detailed
@ProvoBeastAudio Жыл бұрын
Not a personal vehicle, and this video was from years ago! For better wiring diagram help, use this video: kzfaq.info/get/bejne/ptKRkpOH1a64pqc.html
@onefirst3752 6 жыл бұрын
Do i still need the harness adapter if im using a different radio system? EDIT: The stereo i'm using has iso connectors and obviously won't work with the 8pin wire harness. Is there a different wiring kit needed other than the wires that came with the stereo?
@ProvoBeastAudio 6 жыл бұрын
Yes and you generally would wire it just as we did in the video, matching wires up color for color.
@ProvoBeastAudio 6 жыл бұрын
Some companies will build one too if you can source one: www.amazon.com/Wiring-Harness-Adapter-Dodge-Stereo/dp/B00ZFVEXXE/ref=sr_1_14?ie=UTF8&qid=1528135530&sr=8-14&keywords=ISO+Stereo+Wiring+Harness+to+Dodge
@mattbartle6409 6 жыл бұрын
i have an orange wire that is for "illumination" but i dont see where i am supposed to wire it in any help i have a boss audio 611uab stereo and a a raptor aw-whcr wiring harness the harness has the orange wire and im unsure on where to wire it
@ProvoBeastAudio 6 жыл бұрын
Your boss radio isn't compatible with the illumination wire, just cap it off.
@mattbartle6409 6 жыл бұрын
Provo Beast Audio Installation thanks youve helped me a ton and i really appreciate it
@ProvoBeastAudio 6 жыл бұрын
Subscribe!
@kelceymckinley9555 3 жыл бұрын
I have a 2000 dodge durango I've wired up a dual radio but everytime I turn my headlights on at night my dash light go out and so do my brake lights and so do my headlights
@thomastrumigneault8918 3 жыл бұрын
you wired a the orange one which is a dimmer an u dont need that
@holacarnal 6 жыл бұрын
because when you do the video you do not show where each cable goes, one by one, step by step they teach, but I think you do not want to teach how they connect I have a Durango 2000 I installed one of those but it does not work, it only stays solid red and it does not work
@jorgetexier 4 жыл бұрын
Saludos a provo Utah
@wisconsinoutdoors3655 6 жыл бұрын
How do you know what the fuller plate is supposed to be? I want to put a new one in my 2002 that’s why I’m asking
@ProvoBeastAudio 6 жыл бұрын
fuller plate?
@wisconsinoutdoors3655 6 жыл бұрын
The plate so there’s no gap between the radio and the dash so it looks good
@ProvoBeastAudio 6 жыл бұрын
Dash kit is what you need. See the description for parts used in this install and the part number to the dash kit.
@eancola6111 4 жыл бұрын
Hey, mine turned on and played for about a minute, then died and won’t turn back on
@zr0d5 6 жыл бұрын
Where does the amp turn on wire go?
@ProvoBeastAudio 6 жыл бұрын
to the blue wire if you have the amplified system. If not, just cap it off.
@scottjensen618 7 жыл бұрын
What does the orange wire connect to
@ProvoBeastAudio 7 жыл бұрын
Orange wire is generally the illumination / Dimmer wire. If your radio does not have it equipped, just tape it off.
@johnm.primavera4660 7 жыл бұрын
Where does the ground wire from the harness connect?
@ProvoBeastAudio 7 жыл бұрын
See 4:12
@johnm.primavera4660 7 жыл бұрын
Where did the black green wire come from?
@johnm.primavera4660 7 жыл бұрын
It's a 2000 dodge Durango
@ProvoBeastAudio 7 жыл бұрын
It is a separate wire with a small plug connected directly to the back of the factory radio.
@ProvoBeastAudio 7 жыл бұрын
See 4:04, you can see the wire with a black connector by itself connected to the back of the factory radio. That is the ground.
@adammalott4244 6 жыл бұрын
So that one small black wire that was hooked to the metal case. What is that for and where would you wire it too.
@ProvoBeastAudio 6 жыл бұрын
Thats your ground Adam, make sure you connect your Radio's black wire to that wire.
@adammalott4244 6 жыл бұрын
Provo Beast Audio Installation I did what you said and it works perfect now. Next is to figure how to run a sub off the original amp😁
@ProvoBeastAudio 6 жыл бұрын
I wouldn't run a sub off the factory amplifier, just pick up an aftermarket one cheap and install it to ensure you can provide the power required by your aftermarket subwoofer.
@adammalott4244 6 жыл бұрын
Provo Beast Audio Installation well I already bought a box with a built in amp but when it arrived it has a spot for a harness which it didn't come with. Also I have no idea how I would run wire to it without the harness
@ProvoBeastAudio 6 жыл бұрын
check ebay for that harness
@rennmartin3579 6 жыл бұрын
I plug everything in and hear speaker feedback but the display doesn't light up? Is there anyway to make sure my headunit isn't fried?
@ProvoBeastAudio 6 жыл бұрын
Recheck all your connections again, test with another radio, etc.
@rennmartin3579 6 жыл бұрын
I put a new headunit in, it lights up correctly and everything, but theres no sound unless the radio cord isn't plugged in. In that case, it just buzzes.
@ProvoBeastAudio 6 жыл бұрын
You may have the amplified version or the infinity version. Be sure the blue wire in your wiring harness adapter is hooked up to your radio's blue / white wire.
@rennmartin3579 6 жыл бұрын
My radio only has a blue wire that is labeled power antenna
@ProvoBeastAudio 6 жыл бұрын
then tie in the wiring harness blue wire to your radio's red wire.
@scottjensen618 7 жыл бұрын
did you not need a antenna adapter?
@ProvoBeastAudio 7 жыл бұрын
Nope! not on this year Dakota.
@onefirst3752 5 жыл бұрын
For some reason, the sound is only going through my subwoofer now that everything is hooked up. It no longer goes through the car speakers. Any help?
@ProvoBeastAudio 5 жыл бұрын
Sounds like you have the amplified system. Be sure the blue wire on your harness adapter is connected to the radio's blue/white wire.
@onefirst3752 5 жыл бұрын
Provo Beast Audio Installation I'm using a harness adapter because I'm not good at wiring. The blue wire on the adapter is in a different position than the blue/white wire on the radio plug in.
@onefirst3752 5 жыл бұрын
Provo Beast Audio Installation it's an iso converter wiring harness
@onefirst3752 5 жыл бұрын
Provo Beast Audio Installation the wiring layout is all wrong for my adapter, and I'm not sure what to do about that
@coronaryjoker2 7 жыл бұрын
what about a install on a 2004 chevy trailblazer ext LS
@ProvoBeastAudio 7 жыл бұрын
Don't have one at the moment, but i do have a S10 which is similar: kzfaq.info/get/bejne/rp2DgZp32t_Ij2w.html
@davecarrow5348 5 жыл бұрын
What the wires on the back of the radio
@ProvoBeastAudio 5 жыл бұрын
Lots of them...Are you referring to the aftermarket or factory radio?
@michaelh6248 6 жыл бұрын
What did you do with the orange wire on the gray plug in adapter?
@ProvoBeastAudio 6 жыл бұрын
That is generally either illumination wire or dimmer wire. If your radio doesn't have an orange or orange / white wire, just cap that off, it wont be needed.
@michaelh6248 6 жыл бұрын
Provo Beast Audio Installation we cant the thing to get it to work something is wrong
@ProvoBeastAudio 6 жыл бұрын
Sounds like a wiring issue. I would use a multi-meter and test to make sure you have a good ground (black), constant power (yellow), and switched power (red)
@michaelh6248 6 жыл бұрын
Okay now my old radio hooked back up wont run so I am gonna look at it with my friend who knows it or take it to a shop
@ProvoBeastAudio 6 жыл бұрын
Sounds like you blew a fuse. Check your radio fuse in the fuse box
@michaelh6248 6 жыл бұрын
Is that a kit with the deck that helps it fit?. I just got my pioneer deck and It doesn't fit and I am unsure about what to use. Conversion kit?.
@ProvoBeastAudio 6 жыл бұрын
All the parts we used are listed in the description. The Metra Kit we used fits all single din stereos.
@michaelh6248 6 жыл бұрын
Provo Beast Audio Installation this is what I got.B00029X1O6/ref=psdcmw_15729901_t1_B000281X6U
@ProvoBeastAudio 6 жыл бұрын
That link didn't work
@michaelh6248 6 жыл бұрын
Provo Beast Audio Installation all I get when I search it is a metra 30 6228
@ProvoBeastAudio 6 жыл бұрын
Well, you will need the Metra 99-6229 Stereo Dash Kit Adapter
@charleshayes3393 6 жыл бұрын
How did you by pass the amp
@ProvoBeastAudio 6 жыл бұрын
We didn't, we retained it.
@troubledsouls574 6 жыл бұрын
I have everything connected, but no power, no nothing. I have voltage, but I'm not sure about my ground.
@ProvoBeastAudio 6 жыл бұрын
Use the continuity setting on your multi-meter to see if your ground is good.
@Jbrown99th 6 жыл бұрын
I have no sound, where does the blue amp wire from radio harness go to
@ProvoBeastAudio 6 жыл бұрын
That blue wire needs to be hooked up to the blue / white wire on the radio. This triggers the factory amp to turn on.
@Jbrown99th 6 жыл бұрын
Provo Beast Audio Installation that's what I thought, I connect the blue wire from the harness adapter to the blue wire from the radio harness and I still have no sound at all, the radio power up and everything, and old radio works fine. My car is equipped with the infinity system if that makes a difference
@ProvoBeastAudio 6 жыл бұрын
on the wiring harness adapter (that connects into the car), find the blue or blue white wire. Connect that wire and tie it into the red wire (ignition). This will activate the factory amplifier.
@ProvoBeastAudio 6 жыл бұрын
Sometimes the blue wire on the radio is teh amplified antenna and only is on when on the radio setting. changing that wiring configuration will fix your issue.
@Jbrown99th 6 жыл бұрын
Provo Beast Audio Installation this is really a pain, I don't have sound on any function of the radio, the blue wire from the harness adapter is connected to the blue of radio harness, I've even tried put the blue from the black harness adapter to the red acc and still nothing. Is it possible for me to jump the amp relay pin 87 with another acc fuse
@sunlikemedicinec.w.b8141 3 жыл бұрын
I love how dodge put the red velvet sticky things behind the bezel
@heroincrabb8157 5 жыл бұрын
What color wire is the hot one
@ProvoBeastAudio 5 жыл бұрын
Constant 12v is yellow, switched 12v accessory is red.
@heroincrabb8157 5 жыл бұрын
Provo Beast Audio Installation there is two plugs and a small plug I'm stuck
@thomastrumigneault8918 3 жыл бұрын
bro same wheel as mine doesnt have sound control
@michaelstraughn3465 Жыл бұрын
Remember Kids, there is a tab, on the upper right, so you don't do like me and wonder why the radio don't fit, when the thing is up-side-down..
@thomastrumigneault8918 3 жыл бұрын
how u have a whole video an didnt show the damn steering wheel once??
@squirrelkilla7371 6 жыл бұрын
Um....these trucks only came with cruise control on the steering wheel, not stereo controls. You just installed something the truck does not have.
@ProvoBeastAudio 6 жыл бұрын
Haha, okay, even though literally there are volume / track controls on the backside of the steering wheel.
@colbypacholko3812 5 жыл бұрын
Squirrel Killa exactly mine was fully loaded and no radio controls on streering eheel
@colbypacholko3812 5 жыл бұрын
Wheel*
@nickfryer6940 5 жыл бұрын
Nope, my 1999 RT has radio controls on the back of the steering wheel
@colbypacholko3812 5 жыл бұрын
Nick Fryer my is the sport one with everything thing what do they look like on the back maybe I'm just blind ?
@xthexgentx 6 жыл бұрын
I got power but no sound idk what the fk i messd up on it color coded
@xthexgentx 6 жыл бұрын
Plz help
@xthexgentx 6 жыл бұрын
I have the infinity sound ... so factory amp ???
@ProvoBeastAudio 6 жыл бұрын
Sounds like you may have the factory amplified version which in that cause, you need to hook up the amplifier turn on wire to trigger the factory amp to boot up. If you use a wiring harness adapter, you will need to connect the solid blue wire on the adapter to your radio's blue/white wire.
@ProvoBeastAudio 6 жыл бұрын
Yes, you will need to hook up the solid blue wire to either the radio's blue/white wire or the red wire. This will trigger the amp to turn on .
@xthexgentx 6 жыл бұрын
Balls to the wall man thank you so much 💯💯💯
@SAH.MARQUETTE 4 жыл бұрын
Not for 2nd generation Durango.
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 641 М.
The Gas Tap
Рет қаралды 33 М.
SaveMoney DIY
Рет қаралды 633 М.
RusMovies
Рет қаралды 5 МЛН
Thoy Chomnan
Рет қаралды 12 МЛН