How To Replace Rear Axle Seals and Bearings 98-13 Ford F150 Truck

Рет қаралды 443,737

1A Auto: Repair Tips & Secrets Only Mechanics Know

Күн бұрын

1A Auto shows you how to repair, install, fix, change or replace a worn out rear axle and wheel bearing. This video is applicable to the 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13 Ford F150
Get more tips & tricks when you subscribe to our channel!
1aau.to/m/Subscribe
Buy Now at 1AAuto! 1aau.to/ia/1ASHS01077
Connect with us on social media!
1aau.to/m/Facebook
1aau.to/m/Twitter
1aau.to/m/Instagram
Check out this playlist for more great tips and tricks! • Tips & Secrets only Me...
#1AAuto
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 370

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@aguilasoutdoorimprovements2225 3 жыл бұрын

What are the parts number for this videos?

@aguilasoutdoorimprovements2225 3 жыл бұрын

Also great video

@chonagacutan9805 2 жыл бұрын

Rear axle removal on f150 93 Ford truck

@crewzero3586 3 жыл бұрын

How the heck do you guys do this without a single bad word or without calling the vehicle some nasty names?😂

@1AAuto 3 жыл бұрын

+Crew Zero Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@kylevangaalen Жыл бұрын

Editing 😜

@wesoneil6401 Жыл бұрын

This has been the best repair video I have ever watched! Every step necessary narrated in detail with good vision to every detail. Thank you Wes O'Neil

@johnealy6916 5 жыл бұрын

I love how u start from the complete beginning and end with doing the whole job thank you

@scubbarookie 3 жыл бұрын

Thank you Sue, you are one of the best technicians I've come across on youtube. If you were a teacher, I think most of your students would be great mechanics! From start to finish these videos are awesome! God bless you and your families! Take good care! 👍😷

@1AAuto 3 жыл бұрын

+scubbarookie Thank you very much for watching!

@aqeelsyed4614 Жыл бұрын

Come on down here we will hire you

@BeltransUTubeShow 4 жыл бұрын

This is how a professional tech works with great care and detail. Awesome job Sue!!!!!

@grantlafleur2965 Жыл бұрын

Just wanted to thank you so much for your video with all the details. I was able to follow your detailed instructions step by step. I was able to change my son's axle yesterday in 4 hours. Not bad for never doing that before. Grant

@overlandtate2426 5 жыл бұрын

Awesome video, mad respect for only using wrenches to get the job done.

@1AAuto 5 жыл бұрын

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Motorman Tate

@ilovemyevo556 2 жыл бұрын

she used a ratchet too.

@jodirt7501 3 жыл бұрын

Very detailed work done with professional step by step care. I especially like the last part about tipping of the axle at the end assuring the fluid made it to the bearings . The bearing removal looked a bit brutal having to use a slide hammer and all . That was a lot of work . Thank You for the training.

@1AAuto 3 жыл бұрын

+Jo Dirt Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@rubenluna3285 2 жыл бұрын

Your slow and precise showing, is what's needed for us, do it yourself Mechanic's.

@262LongRunner 2 жыл бұрын

Absolutely superb! Clear, logical, perfectly sequential and complete presentation. Thank you very much!

@jtpbuildz959 4 жыл бұрын

GREAT Vid, I've done this procedure 100+ times and you nailed every detail. Even taught me one, I have never sprayed the back of the hat for the park brakes! Awesome video!!

@avon3rd346 3 жыл бұрын

How much does something like this cost to get done for you? How much should i be paying a mechanic to do this ?

@douglasgoldstein8990 5 жыл бұрын

@7:02....I've never heard that before, and as long as you open the fill cap on top of the master cylinder to allow room for the fluid to expand from the cylinder being pushed, you're fine....even on ABS systems.

@dwayneholbrook4056 4 жыл бұрын

Do it all the time that way never had a problem

@johnrsherwood 3 жыл бұрын

Me as well, it's how I was taught back in the day...

@badgerwaxer1 3 жыл бұрын

@@dwayneholbrook4056 Ya, same here. used a C-clamp on the piston with the old pad or a thin strip of metal, nothing fancy.

@AnthonySvt_ 3 жыл бұрын

Personally I’ve never had issues with out removing the cap nor loosening the bleeder screw. I just push in the calipers slowly.

@FleetTech97 3 жыл бұрын

There’s no manufacturers that tell you to open it. Just open the master cylinder cap

@linalea7646 5 жыл бұрын

You are truly a professional. Excellent video. I'm very impressed with your verbal explanation and work. Kudos and much respect!

@1AAuto 5 жыл бұрын

+Lina Bline Thank you! We are happy we could help.

@cash04020402 5 жыл бұрын

Excellent video. Great explanation of the whole process. Thank you for creating this. With knowledgeable experts like this on your staff, I will be checking out your site.

@1AAuto 5 жыл бұрын

+cash04020402 Thank you for your feedback! We are happy we could help.

@aaronfranco1166 3 жыл бұрын

Always enjoy watching Andy or Sue explaining :Very professional!

@annazamberletti1253 2 жыл бұрын

Lady you are a very good instructor. I'm getting ready to do this on my 95 f150. Excellent instructions!!

@WildGhorgh 4 жыл бұрын

Absolutely wonderful teaching video. Thank you, best I have seen.

@LP-MeAndMyShadow 2 жыл бұрын

Excellent and professional. Informative and I like your attention to detail. Also enjoy seeing a mechanic working smarter not harder. Leverage is your friend along with proper tools. I wish all mechanics cleaned everything.

@nickking1510 2 жыл бұрын

That’s why do all my own work including body paint and oil undercoat

@CmfunkS197 2 жыл бұрын

Best detailed video I’ve seen completing this job.- Sue is a badass!!!

@miahcollins4945 4 жыл бұрын

Definitely an awesome video great job of explaining everything down to the T

@bam6465 2 жыл бұрын

Thank you for the very detailed video! it helped me change the rear axel bearings and seals and change the differential fluid on my 98' F150

@lewis84fan1965 4 жыл бұрын

You did great. Just wondering why you didnt change the pinion seal. Looked like it was leaking.

@poncetorres7110 4 жыл бұрын

Wooow😲 This women is incredibo never seen such detalles wish ther were more mechanics like this women. Very nice work awesome job ☺👏🏻👏🏻👏🏻👏🏻👏🏻👍🏻.

@mingthemerciless6855 5 жыл бұрын

Sue, you are a true professional. I've learned some good tips from you.

@1AAuto 5 жыл бұрын

+Mike Formichelli Thank you for your feedback!

@kerrysnyder9810 3 жыл бұрын

Is it safe to just use the slide hammer to remove the seal and bearing at the same time if they're both coming out anyway? Or is there a reason to remove them separately?

@nahnahidc4280 2 жыл бұрын

I took them both out with the slide hammer a lot quicker and no difference

@robertwriley 3 жыл бұрын

Good knowledge Sue. Your verbal skills and the camera work are much appreciated. I subscribed. Thanks

@eduardocanaveral3661 3 жыл бұрын

Im a DIYer from the Philippines..and i have watch countless videos on youtube how to fix cars...i never ever encounter THIS KIND OF VERY WELL EXPLAINED..VERY WELL SYSTEMATIC...VERY CLEARLY.....AND TO THINK THIS IS A MAN JOB....SHE'S THE GREATEST OF THE GREATEST....I REALLY SALUTE YOU MADAM FOR A VERY VERY VERY USEFUL TIPS AND PROCESS YOU'VE SHARED TO US DIYers.....TOTALLY 100% SHE NAILED IT TO THE POINT...NO FLAWS....

@1AAuto 3 жыл бұрын

+Eduardo Canaveral Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@mikeashford9240 4 жыл бұрын

I so love it when people use the correct tools not something I see much on you tube thank you so much great video .....

@frankvalencia9227 3 жыл бұрын

This is why I continue to buy from 1aauto...amazing customer service and how-to’s..forever customer here guys!!!...thanks !

@1AAuto 3 жыл бұрын

+Frank Valencia Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@nicholassherer8785 5 ай бұрын

Very knowledgeable and skilled. It did hurt me when you let that caliper hang though lol. I know it was only for a couple seconds but then older rusty trucks are dry rotting. All in all I would take my truck to you any day

@HeWearsGlasses 4 жыл бұрын

Thank you for your video, I was able to replace my seal today with your help! 👍🏼

@1AAuto 4 жыл бұрын

+Roel M. Mata Thanks for checking us out!

@inibrasiumthefirst2680 2 жыл бұрын

I respect the fact you don't use power tools. Would love to see yall do this with a floor jack

@1AAuto 2 жыл бұрын

+Inibrasium the first Thanks for checking us out! We will try to use a jack in the future. 1aau.to/m/Shop-1AAuto-c

@inibrasiumthefirst2680 2 жыл бұрын

@@1AAuto your welcome! I run an automotive repair shop and have my techs watch your videos first before starting a project

@BenG78 4 жыл бұрын

Did a great job on the one side you did, still I wonder if there's a different for the other side because of the big ring gear you have so how you take the axel out ? Help please... I know you say just do the same process for the other side but is there anything I should know before I try to pull the axel on the other side

@jaimesustaita285 5 жыл бұрын

another job well done, i could watch u work all day long, thks!!

@1AAuto 5 жыл бұрын

+Jaime Sustaita Thank you!

@davidburke1794 5 жыл бұрын

Best video, very complete. Even I can understand the process!

@1AAuto 5 жыл бұрын

+David Burke Thank you for your positive feedback!

@mehnlo 4 жыл бұрын

Your RTV around the bolt holes should go in the inner surrounding the hole not the outside, this will risk fluid leaving through the bolt holes.

@Paul1958R 2 жыл бұрын

Sue, Great video and job - thank you! I've seen many other repair videos you have done - you are the best! Paul (in MA)

@vinmaga6417 5 жыл бұрын

Clean and proper to do it, good job 👍

@oby-1607 2 жыл бұрын

Great work Sue. Very clear tutorial. That silicone in the axle was not a good thing, maybe even what took out the seal. Thanks again.

@owenwhitman6616 3 жыл бұрын

Well spoken and clearly knowledgeable and experienced. Have you considered taking a position as an instructor or taking on apprentices? Thanks for the walk-through.

@richguitar93 2 жыл бұрын

Better details than most I've watched. great job!

@bradwestphal1483 2 жыл бұрын

Great video. Very Specific anytime I need to learn something on vehicles 1a auto is the place to look. Thanks!!!

@christopherganster374 5 жыл бұрын

Great video, excellent work! Thank you

@1AAuto 5 жыл бұрын

@kamakazie-kronos668 Жыл бұрын

One of the best videos I have seen! Great job

@carloscamarena4923 3 жыл бұрын

Great mechanic, great tools and video, you make it look easy, and not even got your self dirty, earn yourself a new subscriber.

@1AAuto 3 жыл бұрын

+Carlos Camarena Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@paisley3518 Жыл бұрын

Nice detailed video. Great teaching moment. Thank you.

@joehurba9897 2 жыл бұрын

This was the most informative video I have come across so far, especially the tip on tilting the axle to get the oil to the new bearing and seal. I noticed wetness at the front of the diff where the pinion seal is, is this a difficult seal and or procedure to replace ?

@jefferyhoward9388 2 жыл бұрын

Good morning I'm Jeffery. I am new glad to have you here.

@1AAuto 2 жыл бұрын

+Jeffery Howard Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@miano07 Жыл бұрын

Awesome Video. Great professionalism ALL the way through. Makes me want to work on my car.

@louiegarcia7527 3 жыл бұрын

you are an excellent mechanic.very detailed.

@douglasphillips24 3 жыл бұрын

Definitely need the right tools & replace both bearing & seal while your in deep into that job. Good easy to understand instructions including mentioning the ABS module can be damaged by not bleeding the piston. Thanks . Now I get to do both of my 8.8 rear axle seal & bearings even though only one is leaking because I'd hate myself if I only did one side only later to have a bearing failure at highway speeds.

@ilovemyevo556 2 жыл бұрын

they don't really fail though.. they just get noisy

@jerryfrederick6610 2 жыл бұрын

Great complete detailed repair. Great Technician.

@EricWayneThomasMusic 3 жыл бұрын

Is loctite 243 acceptable for internal applications and compatible with friction modifiers? I'm asking because permatex makes a specific gasket maker sealant specifically for gearboxes that use friction modifiers.

@DeZzourzEd 3 жыл бұрын

Were can I get such a Slidehammer with the Adapter for the Bearing?

@joep8059 5 жыл бұрын

I have a 2009 F150 Fx4 with E-locker. looks like my seals are toast as well and I'm losing a little axle fluid over time. nothing major. I also, have a grinding noise at low speed 5mph-15mph. could that be my bearings in the rear too going bad?

@roc31539 Жыл бұрын

Excellent repair job. Super good narration. Thanks

@hammer627 5 жыл бұрын

Excellent job on the video! Now I know why the bearing jobs cost so much !

@1AAuto 5 жыл бұрын

+hammer Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@brandywhite5255 4 жыл бұрын

This Lady is very good and knowledgeable about the job!!

@1AAuto 4 жыл бұрын

+Brandy White Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto

@paulsum2496 5 жыл бұрын

Excellent instructional video !

@1AAuto 5 жыл бұрын

Thanks for checking us out. 1aauto.com +Paul Sum

@MrTurbo64 Жыл бұрын

Looks like you've done one or two in the past..great job and video!

@SmartHerSparty 2 жыл бұрын

Hey Sue. I appreciate the video. Quick question...do you HAVE to take the differential rod out to get to the bearing?

@mikemichaels1875 4 жыл бұрын

Nice job your a great teacher

@kristapatrick8937 4 жыл бұрын

Thank you for such an amazing video! Well done it was very helpful

@1AAuto 4 жыл бұрын

+Krista Patrick Thanks for the feedback!

@christhomas6103 4 жыл бұрын

This video helped me a great deal fixing my dodge durango wheel bearing. One point, I think most gasket maker brands suggest beading a full circle around the bolt holes. Permatex videos state that specifically.

@1AAuto 4 жыл бұрын

+Chris Thomas Thanks for checking us out!

@tadpoled3514 2 жыл бұрын

I'm about to embark on this job. Man a lift would make this much more enjoyable!

@dennisfengcanada 5 жыл бұрын

A+ professional, show my respect.

@1AAuto 5 жыл бұрын

Thanks for checking us out. 1aauto.com +Dennis Feng

@williampinson1125 4 жыл бұрын

Great video - very thorough, and well presented. Thanks!

@1AAuto 4 жыл бұрын

+William Pinson Thanks for checking us out! 1AAuto.com

@1AAuto 4 жыл бұрын

+William Pinson Thanks for checking us out! 1AAuto.com

@lukek6492 Ай бұрын

Very awesome video. Couple of things i disagree with. But they are minimal. Awesome video!!!

@hmroa3056 4 жыл бұрын

Thank you. Awesome instructions and information.

@1AAuto 4 жыл бұрын

+HM Roa Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@ahmedtouck8913 4 жыл бұрын

Amazing just amazing good to see women in the mechanical industry, cheers from Australia

@1AAuto 4 жыл бұрын

+Ahmed Touck Thanks for watching!

@andrewmiller7462 10 ай бұрын

great informative video, Only Question is what hold axle outward.?.? If it moves inward axle lock could come out due to centrifugal force. Thanks for valuable info

@thebestlaptime8669 3 жыл бұрын

That was a great video, very clear and helpful

@1AAuto 3 жыл бұрын

+The Best Lap Time Thanks for checking us out! 1AAuto.com

@rakkassan2187 5 жыл бұрын

5 star...excellent video, thank you.

@1AAuto 5 жыл бұрын

+James Delabar Thank you for your positive feedback! We are happy we could help.

@kylefeilmeier7261 4 жыл бұрын

Wow she knew exacly what she was taking about. Awesome video

@joehurba9897 2 жыл бұрын

I was wondering if it matters if the o-ring at the inner part of the axle is supposed to go inboard or outboard of the u clip? Also my o-ring does not have a snug fit to the axle groove. Kinda looks like the oil caused it to swell. I have seen black, green, and brown o-rings. Is there a part # for the Ford 9 3/4 diff?

@rickygarcia4559 Жыл бұрын

Outstanding!! I wish you were my tech! Great job!!

@BigAlWillis 8 ай бұрын

nice detail & informative video. only things I'd do a lil different is RTV on the inside of the cover bolt holes because if on the outside it still could seep through those openings, The way it is applied in the video the fluid would reach the bolts before the gasket seal. The other would be the scraper could gouge the rear end housing or cover resulting in a leak. I like to use a gasket remover wheel or razorblade. just my opinion. excellent video, thumbs up

@northcountryoutlaw9704 2 жыл бұрын

Do you have to replace bearings while changing axle seal on 2003 f150 2wd? Or does the whole hub come out in one piece when you pull the axle?

@avalencia90650 3 жыл бұрын

What do I need to watch out for to keep the spider gears from falling out?

@ianbaumann3678 5 жыл бұрын

Awesome video nice and complete also nice to learn from good mechanics thank you

@1AAuto 5 жыл бұрын

+ian baumann Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@jerrycarter1928 Жыл бұрын

VERY VERY good video with no skipped steps. One comment, I would probably not let the caliper hang by the hose.

@desertbound2005 3 жыл бұрын

Awesome instructional video

@robinmartinez644 Жыл бұрын

good video well explained very good instructor 👍🏻

@LuisHernandez-gf3jx 3 жыл бұрын

By far the best video

@user-jk9pm1lg9z 5 жыл бұрын

Good work Thank you for this informations

@1AAuto 5 жыл бұрын

+باسم رحيم Thank you!

@williamfoster4268 2 жыл бұрын

Does this also apply to the 2014 or was there some kind of last model year change?

@coreyhawkins25 2 жыл бұрын

Do you have to slide the axle out to change the rear bearings on the 2016 Colorado?

@michelemitchell8149 2 жыл бұрын

You go girl I learn so much I did not know that 2002 towncar had rear axle my tc is throwing a abs code all speed sensors have been replaced You are awesome,professional and confident in your trade hope to see more videos you do I have Andy change my rear diff oil now I will add anti slip I would want to change my rear axle I don’t have those tools to remove inner bearings and outer seals one fear I are the spider gear could one put a wood block between them to stabilize them from moving. May I email you for advice? Thank you very much I wish video were out light this you are Awesome thank You

@pl5624 5 жыл бұрын

Nice job...however never let the caliper hang off the hose.they sell colored hooks for that purpose.

@1AAuto 5 жыл бұрын

+P L Thank you for your feedback!

@ScottyCammac 4 жыл бұрын

Or brass clothes hangers

@johncalderon4108 3 ай бұрын

Beautiful video,thanks

@alankeck829 3 жыл бұрын

Excellent - great explanations, great camera work. One of the best DIY videos I've seen.

@mikeberry9584 3 жыл бұрын

Great video learned a lot.

@martinscanlon9423 Жыл бұрын

A bit late to the party here, but I have to say, that was another excellent video. I hope my technicians are as thorough as you are, and I feel better now about being charged for "shop supplies". Being ignorant, I looked it up and for anyone else like me, RTV is an abbreviation for, "Room Temperature Vulcanizing", Vulcanizing being the hardening of rubber, and Vulcan being the ancient Roman god of fire and other hot things.

@1AAuto Жыл бұрын

+Martin Scanlon Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c