How to Replace Serpentine Belt 06-12 Nissan Altima

No video

How to Replace Serpentine Belt 06-12 Nissan Altima

Рет қаралды 170,554

1A Auto: Repair Tips & Secrets Only Mechanics Know

Күн бұрын

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/192/a...
In the video, 1A Auto shows how to remove and replace a slipping, squeaking, or broken serpentine belt. The video is applicable to the 06, 07, 08, 09, 10, 11, 12, Nissan Altima
🔧 List of tools used:
• 14mm Socket 1aau.to/oYk/1AX...
• 21mm Socket 1aau.to/oqc/1AX...
• Serpentine Belt Removal Tool 1aau.to/oy/1AXA...
• 1/2 Inch Breaker Bar 1aau.to/ojP/1AX...
• Ratchet 1aau.to/oadt/1A...
• Socket Extensions 1aau.to/oYk/1AX...
• Torque Wrench 1aau.to/otK/1AX...
For More Info visit us at 1aau.to/h/bEd/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 70

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@Johnta2E Жыл бұрын

0ll

@sublime2craig 4 жыл бұрын

Thank you guys at 1A Auto Parts for these great How-to Vids! I have replaced on my 2010 Nissan Altima 2.5 S the Catalytic Converter Assembly (Bank 1 and Bank 2), all of 4 Motor Mounts, Spark Plugs, Bank 2 02 Sensor, Brake Pads and Rotors all around, Serpentine Belt 😜, PCV Valve, and a Transmission Flush! I used your videos for all to make sure I was doing the job the right way! And yes I got most of the parts from 1A Auto and I really love my new TRQ Drilled and Slotted Rotors and Ceramic Pads! Great quality OEM parts for really competitive prices! Saved hundreds going with you guys instead of going with the local large chain parts stores!

@1AAuto 4 жыл бұрын

+sublime2craig Thanks for checking us out!

@goldfishi5776 3 жыл бұрын

ATTENTION: Your belt might have a tight tolerance. You will not be able to slide the belt onto the ‘harmonic balancer’ last. You will slide it onto each accessory and slip it LAST onto the tensioner pulley. This pulley has no lip and will slip on with relative ease. Done ✅

@1AAuto 3 жыл бұрын

+Goldfish I Thanks for the tip!

@abeheath2648 5 ай бұрын

These guys use so many special tools that they don’t need to in their videos. it runs people off from buying parts from them or working on their vehicle by themselves

@alexhauptli4072 4 жыл бұрын

I found that by placing the belt on A/C last instead of the Harmonica Balancer, it was WAY easier. The HB has the belt seated farther back and much harder to get to last.

@vanhelsing8776 4 жыл бұрын

Alex thanks just changed belt on daughters Altima and could not get in on the harmonic balancer. I then put it on the balancer first like you said and it went right on around the AC compressor. Thanks for the tip.

@raulmorel1872 4 жыл бұрын

Hey that's the real way, I saw you comment late, it took like 2 hours, if I saw you comment early maybe it will take 1 hour.

@unorubbertoe 2 жыл бұрын

Did the same thing

@gregduda6839 Жыл бұрын

Great video, very thorough. I agree with the previous comment that sometimes the new belt is too tight to slide it over the crank pulley last so you will need to slide it over the tensioner last.

@stevenherd9799 3 жыл бұрын

The one thing I don't understand about your videos is why there's no cussing and swearing at the car in them!!lol💯🤣😭😂🤩😁

@mariomartinez1277 Жыл бұрын

😂😂

@RELOADINGandSHOOTING 4 жыл бұрын

8:43 “that’s what she said” 😅😅😅 Excellent illustration! TY TY TY!!!

@jefferylong4239 2 жыл бұрын

Wow! I've never seen such a clean wheel well! Musta pressure washed it and put a shiny new rotor on too!

@geot8622 3 жыл бұрын

I just did mine and ur video helps me. Thank you 😊

@MojoPup 3 жыл бұрын

One thing I liked about my 90's Buick Riviera was how easy it was to replace the serpentine belt from the top.

@casperthesavage22 4 жыл бұрын

4:33 ‘you do you BOO BOO?’ 😂😂

@casperthesavage22 4 жыл бұрын

7:31 it’s GOODnTIGHT

@carlosvelasquez331 Жыл бұрын

Ngl this was still pretty challenging. I wouldn't say hard cause it's a simple thing but getting it on there Maan. I was so ready to do it tomorrow and kept pressing and when it finally slipped on. I wasn't even relieved more like confused as why I did the same thing 20+ times and this was the time it worked.

@vanhelsing8776 4 жыл бұрын

I’m about to install one on my daughters car today, I will let you know how it goes.

@Elc4pitan 4 жыл бұрын

How’d it go

@icebreakers8378 3 жыл бұрын

Did it work

@jefferylong4239 2 жыл бұрын

Please do! We're all dying to hear!

@chutut65 4 жыл бұрын

Thanks to you, got this done in about 30 min. Thanks for putting this out, great job!

@1AAuto 4 жыл бұрын

+CT2165 Chuck Thank you for visiting us on KZfaq. 1aauto.com

@1AAuto 4 жыл бұрын

+CT2165 Chuck Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

@jorgejimenes6303 5 ай бұрын

Do you need to remove the tire in order to change the alternator??????

@bosweat75 3 жыл бұрын

Tried replacing one today on an 08 Altima. Couldn't get the belt on. Turned the tensioner as far as it would go.

@jesusurbina7343 3 жыл бұрын

I’m having the same issue, changed the alternator took it to a remanufacturer and had it redone put it in but now the belt won’t fit went and bought another belt they’re the exact same size and new one won’t fit either

@goldfishi5776 3 жыл бұрын

1: you bought the wrong belt. 2: slip the belt on to every pulley and press it over the tensioner pulley last. Mine also wouldn’t seat using his exact method. The lip on the balancer is too wide even with the tensioner pulled to its end. So the tensioner has no lip; so it can slip on last and done ✅

@brodawg0430 2 жыл бұрын

How did you end up fixing it? That’s what’s happening to me

@mickey-wq7lb 2 жыл бұрын

Do the tensioner last. It will save you time.

@adanpaniagua5210 2 жыл бұрын

Hey buddy thank you very much for information 👍🏼

@alexalfaro9230 7 ай бұрын

Mines to tight is there anyway the auto zone people gave me the wrong belt or is it to cold?

@arnhay 5 жыл бұрын

Awesome work buddy!!!!!

@mrzwade 4 жыл бұрын

What is the code on that serpentine belt used in this video? I have a 2013 nissian Altima 2.5l with electronic power steering I need a belt that fit

@cliby25 2 жыл бұрын

the EPS altima will use 6pk1430

@jefferylong4239 2 жыл бұрын

Go to the auto parts store, tell them what you need. They'll figure it out!

@dinodino6907 3 жыл бұрын

great video

@samirnovruzov9981 2 жыл бұрын

Thank you

@agsgsggsgbshheeh4725 4 жыл бұрын

thank you

@1AAuto 4 жыл бұрын

+Agsgsggsg Bshheeh Thanks for checking us out! 1AAuto.com

@JakeKumar 9 ай бұрын

Can you apply this video for the Altima 3.5 2010?

@1AAuto 9 ай бұрын

+Jake Kumar The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@xCARPx2014 Жыл бұрын

Is this the only belt on Altimas? My car is making a squealing noise & I want to see if it's this belt or if there are more.

@hellaflush49 3 жыл бұрын

Yessir perfect video thank u

@gustavelaughnowcrylater5309 3 жыл бұрын

Thanks my friend said a guy charging her $80 to put her belt on. I’m going to beat that mechanic with the belt. Before I put it on.

@iwalewa Жыл бұрын

How to set taming chain for benz MLS 2oo2

@pattyr1927 3 жыл бұрын

What if I can't get the tensioner to pull down to get the belt back on?

@perrysanders3555 2 жыл бұрын

Remake this video showing the belt going on the tensioner pulley last. (As many have said here.) I just lost 2 hours of my life because of this video. Watched a different video showing tensioner last and got it first try.

@HailAnts 3 жыл бұрын

This looks like a V6 (the slotted drilled rotor of an SE-R). Are the V6 and I4 the same?

@cliby25 2 жыл бұрын

v6 won't have hub caps. this is a base S

@amandabennett198 Жыл бұрын

🎉

@Tazmanian_mma 3 жыл бұрын

Nice! Is it the same for a 2013 Altima sv?

@genefoster8601 2 жыл бұрын

Tensioner different.

@kaneshaanderson3878 2 жыл бұрын

Wat is da price on something like dis

@jacobswaney9798 4 жыл бұрын

i replaced mine but now my car is shaking and throwing a p0300 misfire code could it be a bad pully?

@sincerehoopstar410 3 жыл бұрын

That’s a random multiple misfire

@bryaneller3657 3 жыл бұрын

No misfire

@SaintSevenTTV 3 жыл бұрын

Change the spark plugs or the ignition coils that turned off my check engine light

@Twobarpsi 3 жыл бұрын

Good video!

@jonathansiemonsma1906 Жыл бұрын

I work in a repair shop and we never torque the wheels with a torque wrench we just torque them in a cross pattern with the impact wrench

@jimmmmmypokemonplug206 Жыл бұрын

Can i start the nissan with out the serpentine belt?????

@brothadre76 3 жыл бұрын

U do u Boo-Boo? Lololol

@brothadre76 3 жыл бұрын

Nice job tho!

@robertneighbors5942 3 жыл бұрын

@TheGreatAmerican66 3 жыл бұрын

Thank you

@1AAuto 3 жыл бұрын

+Jeffery P Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c