How to Replace Serpentine Belt Tensioner 06-12 Nissan Altima

Рет қаралды 169,324

1A Auto: Repair Tips & Secrets Only Mechanics Know

5 жыл бұрын

Buy Now!
New Serpentine Belt Tensioner from 1AAuto.com 1aau.to/ia/1AEBT00070
1A Auto shows you how to repair, install, fix, change or replace a broken, noisy, squeaky, worn or groaning serpentine belt tensioner. This video is applicable to the 06, 07, 08, 09, 10, 11, 12, Nissan Altima
🔧 List of tools used:
• 13mm Socket 1aau.to/ovP/1AXAA00015
• 14mm Socket 1aau.to/ovP/1AXAA00015
• 21mm Socket 1aau.to/ogb/1AXAA00043
• Serpentine Belt Removal Tool 1aau.to/oo/1AXAA00019
• 1/2 Inch Breaker Bar 1aau.to/odu/1AXAA00078
• Ratchet 1aau.to/oA9/1AXAA00016
• Torque Wrench 1aau.to/oh6/1AXAA00044
For More Info visit us at 1aau.to/h/bEc/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 107

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@kellyalexander7222 21 күн бұрын

Your video was the first one I found that shows the challenges of putting the new tensioner back in place. This is my first time doing this. Helped calm me down.

@mugenfiji0327 4 жыл бұрын

He fails to mention that a lift makes this ten times easier

@marcsmith3881 3 жыл бұрын

I was just thinking the exact same thing. The way you have to contort your body on the ground is way different.

@bobbing5788 3 жыл бұрын

Upper bolt need special length. I used 3/8"drive adapter to 1/4" socket was good length. Mine not very tight.

@toddub 4 ай бұрын

For those of you without a Vehicle lift try this. Put a jack under the oil pan and loosen the 4 bolts on the top motor mount. Slowly lower the jack. This will lower the engine and give you an extra 1 - 2 inches of space to access the top tensioner mounting bolt. Don't remove the bolts. Leave them threaded in 1/4 - 1/2 inch. The bolts are pretty long and can give you the extra room you need to complete the job quicker and easier.

@traingunner Жыл бұрын

“You do you boo boo” Your great attitude makes these videos great 😂

@stevocs Жыл бұрын

As usual, great job. Some comments mentioned it's easier with a lift..... Duh. But backyard mechanics know how to deal with that. Love these videos. 😊

@VEN1 3 жыл бұрын

3rd hole upper right.. Roll tensioner to let off tension on belt and put a pin,allen wrench whatever thru upper right hole and in engine block and it'll hold the tensioner to take belt off.

@ing.yainerpenaalmarales16 4 жыл бұрын

Brother, God bless you, you are a excellent Mechanic. Thanks so much.

@1AAuto 4 жыл бұрын

+Ing. Yainer Peña Almarales Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@klejdirusta3643 5 ай бұрын

Perfect video Len! One thing worth mentioning is also to be careful not to spin the crankcase pulley on accident while doing this job because it will mess up the timing since the belt is off Other than that everything was on point! 👍

@ing.yainerpenaalmarales16 4 жыл бұрын

Thanks again Man, this video is very helpful. God bless you my friend.

@1AAuto 4 жыл бұрын

+Ing. Yainer Peña AlmaralThank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com es

@1RJW381 2 жыл бұрын

THANKS 1A- AUTO FOR REFFERENCE AND PART HELP THIS FIX DESCRIPTION HELPED A FAMILY MEMBER THANKS✅💯

@ignaciodominguez7289 2 жыл бұрын

Very cool an clear thank you I'm ready to put it in practice .

@glenvargas3233 Жыл бұрын

Awesome instruction. Thank you!

@sonofhebrews 5 жыл бұрын

Awesome e video man! This helped me tremendously

@1AAuto 5 жыл бұрын

+Lionel'sVoice Thank you for your feedback! We are happy we could help.

@alexcoats1456 4 жыл бұрын

great video thanks bro!

@rerun3d 3 жыл бұрын

I would address the fact that the car is running in salted roads or is showing heavy surface rust on metal parts. These bolts should never be put in dry. I would always use no-lock on the bolts when putting older ones back in or with new hardware. Your videos are of great quality but the mystery of taking things apart and the frustration of stuck bolts can be mitigated with no-lock. Another point is to use thread locker. It may be slightly more difficult to back them out but they will not rust or corrode.

@1AAuto 3 жыл бұрын

+rerun3d Thanks for the tip!

@BillSW Жыл бұрын

what is no-lock?

@israelesmeraldajr6054 4 жыл бұрын

Great video. I have the same model year 2010 and will be doing the same job. Please also post another video on how to remove the water pump. Only videos out there on KZfaq showing how to do it are for older models, nothing for the 2009 - 2012 generation Altimas. Thanks

@1AAuto 4 жыл бұрын

+Israel Esmeralda Jr We're always cycling through common cars. We'll add this repair to our list! 1AAuto.com

@kevineccleston8341 Жыл бұрын

Excellent how to vid. Covered all the key info and clear concise shots.

@biggs5864 Жыл бұрын

I would really appreciate if you could tell me the bolt size the bolts broke off in the street so I don't know what size to buy thank you 🤙🏼

@nicolcohen5532 4 жыл бұрын

Thank you so much for the video.... Very informative and tastefully entertaining 🥰 "Do u boo boo"😆... It did the trick!!

@1AAuto 4 жыл бұрын

+Nicol Cohen Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

@okidokidiego5783 3 жыл бұрын

Nice job,thank my men

@jaybee5794 Жыл бұрын

Excellent video! You instructions are easy to understand and follow. Thank you. Do you ever work on Altima SE R?

@nobytes2 3 жыл бұрын

What ratchet type, extension and socket you guys used? I had a 3/8 craftsman wrench with a stubby and a small 13mm and I was able to lose the top nut but then I got stuck. I couldn't find any other combination to get it off. Any suggestions on a wrench or ratchet? I see that you used the ratchet with an angle, is that the only one you used?

@anthonythomas1024 2 ай бұрын

You Rock Bruh. Thanks.

@stevewaclo167 4 жыл бұрын

Thanks for this! NE car, right? 😀

@bFORCe2003 Жыл бұрын

Shux, I wonder if it is easier attacking it from the top or would the top engine mount be in the way?

@mimumimimimimimimimimmim 4 жыл бұрын

i only had a stubby 14 mm wrench, making the tension an effing nightmare!

@poppaluv 3 жыл бұрын

Take another wrench and insert it sideways on the wrench for leverage.

@jamesrahn8339 2 жыл бұрын

I call B.S. on that top bolt!! Beware it's super hard to get a socket on there. The pulley for the water pump is in the way of getting a socket on there as well as a deep socket even with a ratchet that pivots. Also not enough clearance for a deep socket...it's a mofo! I had to use an extension with a swivel and barely got it loose and retightened!!! Had to use a wrench and get a small turn at a time till I could use my finger...it almost couldn't be done.

@rosebud92 Жыл бұрын

Ur the man

@isidronalbertoveloz4573 Жыл бұрын

Perfect...thanks...

@TheBergMan 3 жыл бұрын

Thank you, sir

@1AAuto 3 жыл бұрын

+BBHEEE Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@glensyse3810 2 жыл бұрын

Is that the front motor cover that the tensioner bolts on to because my bolt holes are broken

@FearGod_NotSpeeed 4 жыл бұрын

This the same steps for 2006 maxima ?

@jakelamarch99 Жыл бұрын

Is this for a 3.5L V6? Not sure if I missed it in the video.

@Christizsalvation316 6 ай бұрын

Can you make a video on how to replace a harmonic balancer on this specific car. Thanks len.

@meganandjonathankeough3671 2 жыл бұрын

What is the thread pitch for the 2 mounting bolts?

@____HEISENBERG____ 5 ай бұрын

Whats the torque wrench to install the new tensioner? I'm doing my 2011 nissan altima 2.5s right now.

@bigsmokenochoke4203 4 ай бұрын

@1AAuto The top mounting bolt for the tensioner pulley broke off.how do I go about getting that out

@roadstar499 Жыл бұрын

I may have to modify my mud shield by drilling a hole to get good access to that top bolt 😊..

@AJ-on-youtube 4 жыл бұрын

Changing the tensioner was much harder than I was led to believe. It took me forever to get the bolts out and back into the new one, working through that little hole in the wheel well, and one of the bolts broke so now I'm going to have to take it to the shop anyway. I might as well have brought it to the shop in the first place because it's not a very expensive job and it's a major PITA to do it yourself.

@CloseMyDoorMane 3 жыл бұрын

Mine just did the same thing today smh. I'm praying it's the bottom bolt that broke off I'm having it towed right now.

@jeffreystevens3917 Жыл бұрын

How did yall break the bolt? Tightening it?

@elvincuevas2335 3 жыл бұрын

What size bolt is it for the new part?

@lookfortrueonegodinislam.6830 4 жыл бұрын

Im trying to change the tensioner but the first bolt borken and i have no dea how to get it off, beside not enought room to drill it out. Any idea to help please? And ifcthere is a video will help .

@jaminshinkowski4477 3 жыл бұрын

I’m going through that struggle right now. Except mine sheared off both bolts smh

@seangore6349 2 жыл бұрын

@@jaminshinkowski4477 how did you get them out

@seangore6349 2 жыл бұрын

How did you get it out

@BillSW Жыл бұрын

how was it fixed?

@Atmarixx 2 жыл бұрын

Can you manage to reach the tensor from the top? I'm feeling adventurous after a snowstorm that just hit lol Laying on the ground is not exactly an option. Also, A1 auto be mad extra when replacing parts. They replace everything on the way to the damage part lol

@JMG2017 3 ай бұрын

I need to replace the 13mm bolts do you know were can i get them

@danielwillliams9669 2 жыл бұрын

What are the torque settings for those bolts?

@hamsolo1942 Жыл бұрын

If this tensioner fits for the 2006 it should fit the 2002-2006? Correct me if I’m wrong.

@gregmercil3968 6 ай бұрын

I have to replace this part on my wife’s 2011 2.5 Altima this weekend and I am really not looking forward to it. I’m an HVAC tech not a mechanic, dammit lol. Anyways, I replaced the water pump on this car about 3 and a half years ago so I already have an idea of what I’m up against.

@brendacalderon9445 Жыл бұрын

If taken to a shop, how much is this job, rough estimate with parts. I was told my one it would take 7 hours and he charges $60 a hour after the first $80 a hour. But he was mobile and he didn't want to do it that day smh. So how pong did it exactly take you, putting belt and everything on?

@chrisgarcia5462 Жыл бұрын

My rogue makes a squeaking noise when it's cold then it goes away after it warms when driving. Is the tensioner pully the problem.?

@tonycervantes4816 2 жыл бұрын

Sr can I change my tensioner without take of serpentine belt all off . ??

@camarorob124 5 жыл бұрын

This works for Nissan 2.5l 02 to 06 as well?

@1AAuto 5 жыл бұрын

The process is for 2006-2012 Altimas, but you should be able to use some of the steps for a 2002-2005 as well. Thanks for watching. +Robert Henderson

@alyssad.9440 Жыл бұрын

Will this work for 2014 Altima?

@rodriguez83124 Жыл бұрын

Are all bolts the same size

@rhall9880 2 жыл бұрын

Bolts holes that hold I n tensioner and pully broke off how to fix or is there way to bypass tnsioner pully

@BillSW Жыл бұрын

how did u fix it?

@kj475 2 жыл бұрын

Now imagine trying to do that 2 hand move to place the second bolt while you're laying on the ground. Without a lift, you're better off paying someone.

@John-jp3vt 3 жыл бұрын

So no torque specs for the tensioner?

@savagesooner4891 2 жыл бұрын

What if bolts had broken off inside when tension pulley fell off?

@seangore6349 2 жыл бұрын

Please answer this question

@evelinawheeler6493 5 жыл бұрын

Which wheel should we take off.

@1AAuto 5 жыл бұрын

+Evelina Wheeler The front passenger side wheel is removed to access the tensioner and belt. Thanks for checking us out. 1aauto.com

@jron5113 Жыл бұрын

What are the symptoms to let you know it’s bad?

@dacoyeowens1436 9 ай бұрын

Would this way work for Nissan versa

@1AAuto 9 ай бұрын

+Dacoye Owens We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@Mathiu_Truhile 3 жыл бұрын

Is this similar to a Maxima too?

@1AAuto 3 жыл бұрын

+Mathiu Truhile We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@ladodger0015 2 жыл бұрын

How about show a video on a 3.5l v6 engine

@1AAuto 2 жыл бұрын

+Luis Hernandez We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c

@carlosespinoza4375 5 жыл бұрын

This work on a 2006 Nissan Altima 3.5?

@1AAuto 5 жыл бұрын

The part is not listed to fit your vehicle due to the engine size, however, you should be able to use some of the steps in the video for your repair. The part for your vehicle, NSEBT00001 is currently out of stock. +Carlos Espinoza

@carlosespinoza4375 5 жыл бұрын

1A Auto Parts thanks man I really appreciate you replying and for the info

@chiefadanowa 8 ай бұрын

What was the bolt size?

@charlesacevedo9924 2 ай бұрын

Anyone have the torque specs ? For the tensioner?

@traxxastmax1 4 жыл бұрын

This is the 2.5 right

@xX_und_wv_d_x_Xx Жыл бұрын

Yes

@waltd888 Жыл бұрын

Nice place for the oil filter Nissan. 🤨

@Mushroom.Madness. Жыл бұрын

15:51

@Sroor2023 4 жыл бұрын

Why you Just removed the pulley, change the bearing and thats the fix

@hugofraga4075 4 жыл бұрын

Sometimes the spring goes out

@YeetxBoi 3 жыл бұрын

The manual specifically states to replace the entire assembly, you will not be able to get the right torque on the pulley bolt because it moves around and not enough space to do so.

@ridemfast7625 3 жыл бұрын

@@YeetxBoi Why cant the tensioner assy be removed and then replace the bearing only? I ordered the bearing and thats the plan. I read others have done it...

@akcidentakareke5390 3 жыл бұрын

Misleading title this doesn't apply to the coupes cause I'm having trouble with the top bolt it's located right behind the ps pump pulley which is a nightmare I've tried many times nothing seems to fit only other option I see is to remove the ps pulley but only issue is there's no bolt on it instead has a threaded opening not sure what tool I should use other problem is the limited space amount lll figure it out tho

@calebvincent8605 Жыл бұрын

This is the most crap design for a car I’ve ever seen. It’s almost impossible to get to the tensioner when you’re doing it on the ground. Had to take a sawzall and cut some of the inner fender out. I have dealt with the tensioner on my car all year. It broke the bolts off and came off the first time. Put it back on then it done the same thing again. Put a new tensioner on it this time and now the bolts have backed out of the tensioner and threw the belt again. No idea why it’s doing this

@HailAnts Жыл бұрын

NOTE: This does NOT apply to a 2006 Altima, at least not the 3.5 V6 model, as they have a manual, worm-gear tensioner not a spring-loaded one. Actually, after watching other videos, it seems sometimes the adjuster is automatic and sometimes it's manual, on various years and both I4 and the V6..

@dallaspilotcar9293 3 жыл бұрын

Not that easy on a freaking 2016

@davidcastillo1340 4 жыл бұрын

Great video except for the cringey "you do you booboo" comment

@CJWashington1 4 жыл бұрын

Yo I loved it when he said "you do you boo boo" 🤣💯👌🏾 absolutely love his character! Make light of things, you shouldn't have to be so serious all the time. His Personality showed in this video 💪🏾💯 let him make more videos please! 🤣 I'm not even done watching this video. I stopped after I heard this comment 🤣😭I wanted to see if ANYONE else laughed at this because that was great bro! 🤣🤣🤣💯 Alright now I'm going to finish the video haha