Digging this short format lads - very nice! ~r

I wish center stands were a more common manufacture option than they appear to be now. Great short video.

A note of important here. Lemmy comments that it's necessary to see the lowest hanging part on your bike, and uses a street glide as example. If you're like me and have something built on the Dyna platform, the lowest hanging part is NOT the frame, but the underside of the transmission case. The pads on a typical motorcycle lift aren't far enough apart to go to the frame on either side of the tranny case, so you have to find another option. HD sells frame supports that you can snap onto the frame which will then allow you to use a bike lift, or you can modify a the lift so the pads are wide enough to let the low bits dangle between the pads and lift on the frame. There are youtube vids around that show how to make the mods if you decide to go that way.

Thanks for all the super-helpful info, RZ... love Lem!

This was great, Lem. Enjoyed this.

Excellent video Bro. Keep it up.

looking forward to more of these short vids...good job Lemmy

Thanks a lot bro, I got a vintage from 1979 so I got to do most maintenance and repairs by myself, and I was split whether to get a lift or a jack, now o guess a jack is my go to since I always need to change fork oil, and take whole engine apart

2 mins in heaven with Lemmy The two lowest parts hanging off my Street Glide are my knuckles dragging....

Great tips, I'm currently looking for a new ride. I'm thinking old school bobber is a perfect fit for me.

Lemmy in ( honey I shrunk the bikes) coming to theater near you.

great short video with very useful information. revzilla rules

Wow great video. Educational and no extra words lol

Good use of the models. Go Lemmy!

Happy Valentines Day Lemmy, ya big, scruffy lovable oaf. 👍🏻

Lemmy mentions shock replacement. I used a $5 sawhorse bracket, some 2x4's and ratchet straps to make an A-frame to lift my bike from the subframe. Short of getting a $400 motorcycle lift, it's the best way.

Brilliant video!

Got my answer in 30 seconds. Thanks

Thanks mate

Lemmy you need your own Game Show! You're that good..ask for a raise Mate!

Great video and timely too just when I was looking to buy a stand for my Indian Chief Vintage. Any recommendations? Thanks

Sweet, good to know I made a sound decision. Now just gotta find a way to lift my bike from above

Do you have a video/tips showing the best way to lift sporty’s from above?

Good video. For most street users who aren't riding a cruiser the best stand is a Pit Bull.....built to last a lifetime and they come in various configurations.

I like lift stands for my dirt bike/dual sport as well - easier on the back!

Lem - Off topic here but hoping you see as this is a newer vid...your Road King video...one of the "dislikes" was the saddle...you mention something about having a LePera Maverick on an in house Street Glide I believe...how awesome is it? Been looking for something from them and or competitor...seats are tough to figure out as you cant really "test" them over a long ride. Any insight would be helpful...thanks

What about a lift for a Dyna? I know we have to have special adapters or something and because of that I haven't bought one yet

Do I need any other alternative stand for my naked Yamaha SZ-X which actually has a middle stand though?

I actually use ratchet straps and just hang it from my garage ceiling :D does not work with really big ones but it's pretty nice

Tnx dude 👍

Don't do major work with just the center stand. I took both wheels off my R1150R whilst it was on the stand, and you guessed it the balance changed and it tipped forward off the stand. Lucky the underside is tough and with two car jacks under the cylinders I was able to get it up again.

Have the rear paddock, what front stand is recommended for ZX-10R for tyre change? Can it be jacked if no front stand is available?

Man my dual sport (Kawi super sherpa is too big to lift on to a stand and too small for the front/rear stand option (I think). This is one mystery as a new Rider that continues to confuse me as to what I should try or order. I need something that gets both wheels up so I can take the wheels off, replace the chain, change the oil etc. A 5-gallon Home Depot bucket kind of does the trick but it's hard to get up and on and off. And damages the bucket.

What to buy scissor lift or rear stand Just to clean and lube chain.

Hi guys! Do you work with Bajaj Pulsars? I know they're not really famous in the US, but they are here in Latin America, I have one so it would be nice to see you talking about them

A few feet of scrap 2x6 and another bit of 2x4 and you can fashion a good cruiser lift

I bought a front paddock stand and I needed to remove the front wheel, only to find that the paddock stand had a support bracket which covered the wheel nut. That day saw a lot of heavy lifting and curse words

Where can I get cool little miniaturized bike models with miniaturized stands like Lemmy has in the video? You guys at Revzilla have all the cool toys 😅

can i get a paddock stand for a cruiser (vulcan 800)

Hi there, very nice video. Specifically, what type of stands is good enough for just changing engine oil of Honda 750 Shadow Aero? The second one in this video? Thanks.

I wish centre stands, even as accessories, were more common

I use jack stands under the pegs on my R6 when doing swingarm and shock maintenance ;)

Need a vid focusing on lifting standers and sportbikes.

because of MY short stature I'm getting a lowered F750GS that does not (I believe) have a center stand soI will have to use a paddock stand. Does REVZILLA carry them? Thanks

Center stands!

This is really simple, if you just ride your bike and have a mecanic and don’t work on your bike buy a piece of wood really to wood that thing from falling, if you work on your bike don’t go cheap on the lift or stand, yo need a stand that you can at leat stap one strap to secure it, thats it

Nice video but do you ship helmets to Mauritius? Or any other gear

very interested in where i can get a miniature kit stands included

I hate my bike for this, its a naked bike so it doesnt have a centre stand, the dust covers on the bottom cant support the weight of the bike and the designers didnt think to add any holes for the swingarm spools to go in.

I was considering bike jack, but I was worried about my exhaust. It seems I was right. ;]

What do you recommend for FZ-07?

Need more info for sport bikes

Supermoto: 1 & 3

Affirm denied me because of a typo, was gonna finance over $1000 worth of gear. I called and asked and they said they can't do anything about it. I'm sad RevZilla...

Nothing fits on my Rebel 500 ...

I think it's time to change the tired on the model sport bike they're bald xD

That was silly!!!

Every thing to do suspension work. You never showed how to

I usually just shove my fatboy over on it's side to get the wheels off. What's the worst that could happen?

Good job not explaining how to get the front end up to fix the forks on a naked bike that has no hole for a triple tree.

I disagree with all these options. Working on the ground sucks. Buy a lift table.

None of your examples will pick up my bike...