2 Stroke Seadoo Buyer's Guide!

Рет қаралды 16,366

5 ай бұрын

With warm weather approaching and Seadoo's flooding marketplace we thought it might be helpful to give y'all some tips on what to watch out for so you don't get burned.
Hope this info helps some people out, see ya on the next one!
www.todaywewrench.com

Пікірлер: 66

@travishazelton1326 4 ай бұрын

Great information here, very thorough 👌. Keep it up guys, your videos were a huge help in getting my ski working properly.

@TodayWeWrench 4 ай бұрын

Thanks so much!

@dannyr6094 4 ай бұрын

Definitely a dope video appreciate the info!

@TodayWeWrench 4 ай бұрын

Glad you liked it!

@ExplainedOnline 4 ай бұрын

The best sea doo videos ever 🤟🏻

@TodayWeWrench 4 ай бұрын

Thanks man!

@toddreid7660 4 ай бұрын

Talk about a diamond in the ruff. That ski minty other than the spooge fuel lines.

@TodayWeWrench 4 ай бұрын

Yeah that things mint!

@gabeholbrook8427 3 ай бұрын

Just bought a 96 xp on marketplace for $200 bucks. It had been sitting but got it started right up. Few maintenance items but damn I'm excited for summer.

@TodayWeWrench 3 ай бұрын

Hell yeah!

@jamiematthew4986 4 ай бұрын

It must be nice to find low hours skis lol. Here in Florida they are all SBT'd, clapped out, high hours skis.

@user-mi2hg3fx1j 4 ай бұрын

What’s wrong with SBT?

@StefanMailey 4 ай бұрын

I always start the ski before I do anything. Iv seen sellers dump 2 stroke in the jugs to fake high compression numbers. I like to burn all that crap out. I then inspect around the crank seals and pump etc. Let the motor cool. Then compression test. I purchased a ski once...20 years ago. Tested compression in the guys driveway. 150 per hole. Got it home and retested 128,133. Life sucked. Also removed the flywheel cover and of course. Oil dribbled out. Crank seals were shot. Iv owned at least 60 skis in my time. That only happened to me once. Now I check all that stuff and 2 times out of 10. Same issues.

@TodayWeWrench 4 ай бұрын

You would see the fluid on the compression tester. I want it ice cold to see if seals leak and to see the compression.

@Tannerbaker3331 2 ай бұрын

Is 130 not good compression ?? Supposed to buy a 99 GTX with 130 compression

@boilk Ай бұрын

Thank you so much for this. I can't wait to watch it later today. I'm in the middle of a big decision process. Someone is selling both a 1995 GTS and a 1995 GTX. They are both well-cared for, and he let me ride them both out on the water, and both ran like a dream. New plugs and wear rings. And it's in about the only price range that I can afford. But, of course now, there is the dilemma of maintenance and 2-stroke engine...both from the perspective of breaking down and how much more pollution is it dropping into the lake vs. a 4-stroke. If you guys, or anyone else who may read this, has any advice on going with a 90s 2-stroke, or which of the above rides would be easier to maintain: GTS, or GTX, it would be much appreciated. I'm a total newb to this, if it isn't obviious.

@MrTheBigNoze Ай бұрын

It's a 90s 2-stroke, it's fun and you shouldn't care about pollution. Maintenance shouldn't be an issue either if you use the right oil and gas. Yes, eventually you will have to rebuild to reach peak performance again but honestly these Rotax 2-strokes are pretty robust and some of the best fun per dollar you can get on the water. Engine isn't any worse to work on than a lawnmower. Lots of great resources out there. Get em and rip!!

@xylol412 16 күн бұрын

IA tags and he had an ia shirt on. My home state! Now in TN.

@vintagemxer9165 Ай бұрын

Good advice for a newbie like me. Still deciding what to buy and how much to spend.

@TodayWeWrench Ай бұрын

Glad it was helpful!

@ultralightflyer1260 4 ай бұрын

🎉 he uploads

@TodayWeWrench 4 ай бұрын

LOL!

@RicksHomeHub 18 күн бұрын

I was able to obtain two 97 SPX’s from a friend for free. 1 currently runs but we believe has a small oil leak. The other one has some mods to the engine. It would turn on but didn’t sound right. We did a compression test per this video and 1 cylinder came back 125 (cheap compression tester from amazon) but the second cylinder completely dead no reading. Should I buy a new engine or is it worth having a professional go through it?

@tobyrempel8952 2 ай бұрын

That is one clean spx

@TodayWeWrench Ай бұрын

She's gutted now lol

@thomaspaccione7214 4 ай бұрын

The XPS synthetic oil from back in the day was green.

@TodayWeWrench 4 ай бұрын

It’s been red since 2007. If you have oil sitting in from 2007 it should be changed regardless. Heck if you have oil sitting from 2 years I’d put fresh in. Cheap insurance

@thomaspaccione7214 4 ай бұрын

I still have a quart or 2 of the brown DI specific XPS oil. :-)

@MarshallKeeler 24 күн бұрын

What is your opinion on Klotz oil vs XPS? Klotz is more available in my area and seems like a lot of guys love it

@TodayWeWrench 24 күн бұрын

I would recommend using XPS in the crank and in the pre-mix or oil injection system. The XPS is formulated not only for the rotary seals but to work cleanly with the rave valves. Its my go to and works well

@evanganske9240 24 күн бұрын

Super informative! I have a minty (even with high hours!) 96 Polaris SL780 but it sadly developed a crack in the hull. Interested in a 95+ Sea Doo. Not sure what i should be looking for as far as a motor- the 587, 657, 717, 787, or even a 951 in later models if the price is right. Any recommendations on which model/engine I should look for?

@TodayWeWrench 24 күн бұрын

For sure go with the 787 it is incredibly reliable, plenty of HP, and is easy to work on

@tyronetrump1612 Күн бұрын

800 motor all the way 96 XP or the 97 SPX

@HypersonicDog126 4 ай бұрын

How do you check the hours on X4 skis? I have a 95 and 96 XP and I'm curious.

@TodayWeWrench 4 ай бұрын

You would need a scanner

@TOMVUTHEPIMP 4 ай бұрын

Im not into Jet Ski and know nothing about them. Do MFGs still sell 2 stoke or everything 4 stroke now?

@TodayWeWrench 4 ай бұрын

Don’t think 😞

@hi2340 2 ай бұрын

What is a good compression tester? Which brand do you use?

@TodayWeWrench 2 ай бұрын

Mine is snap on

@grast5150 4 ай бұрын

I see this is an SPX. Do you have any recommendations for GTX DI's for hours? Thanks.

@risingembersgaming7740 4 ай бұрын

DI = Don’t invest

@TodayWeWrench 4 ай бұрын

BINGO!

@grast5150 4 ай бұрын

@@TodayWeWrench OK, so how many hours can you get out of an SPX before bottom end rebuild? How long till the crankshafts run before needing to be rebuilt or new? thanks.

@killerkork 4 ай бұрын

Great video as always !! On the 95/96 fuel tank recall...is the replacement free from the dealer? 😮

@TodayWeWrench 4 ай бұрын

Thank you!!! Yes but they are on a stop production. You wont likely find a dealer with them in stock

@killerkork 4 ай бұрын

@@TodayWeWrench got ya...just curious. Thanks!

@adamsanchez1410 Ай бұрын

Do these old Sea Doos have wearable wear rings the same as the new ones?

@TodayWeWrench Ай бұрын

Yes they do, we have a how to video on it

@Alex-tp8ku Ай бұрын

Please do a video on how to fix leaks. There is too much water inside in 15 minutes.

@TodayWeWrench Ай бұрын

Sure join our Patreon and request it www.patreon.com/TodayWeWrench

@slipknot3o2o 18 күн бұрын

What’s up with that healthy 787? 👀👀

@johnearnhardt4709 4 ай бұрын

I have noticed that you use carrier bearings on your skis and not the carbon seal. Is there a reason why, do you like them more?

@TodayWeWrench 4 ай бұрын

Yes I always do carrier bearings I like them better

@johnearnhardt4709 4 ай бұрын

@@TodayWeWrench why do you like them better, are there pros and cons? I thought being older tech, that it wasn't as good. Or did Sea-Doo cut cost and went to something cheaper. I have never used one, so I'm just asking. Are there any mods to make the swap?

@tyronetrump1612 Күн бұрын

@@johnearnhardt4709 seen many skis sink or the hull fills up with water ( sometimes water in engine) due to that shit carbon ring setup. Engine alignment , bent shaft, improper bellows installation usually are the causes for leakage and it gets worse if you jump the ski a lot or pound it. No one can ever figure out the thinking of the manufacturer when they come out with stupid ideas. Kinda like their great fix for the early 951s spraying water in the airbox ,,,,, lets just make a rubber diaper around the manifold joint and still continue to screw people and deny warranty claims because of "water ingestion "

@grast5150 4 ай бұрын

The XPS synthetic oil is 100% needed and the bomb. Do not skimp on oil. That is the number one reason for engine failure which is cheap oil which break down. As to the oil in hull, if you still have oil injection, plesae check the oil tank as in my opinion they can and will eventually leak. I always plan on a leak test or replacement or elimination of the oil tank. Later.

@TodayWeWrench 4 ай бұрын

Yeah I always do every line before riding

@tyronetrump1612 Күн бұрын

Don't fall into that BS cult that you need to run over priced seadoo XPS or your shit will grenade.... Rotax motors do just fine on any API-TC oil like Pennzoil or Quicksilver from Walmart. Oil breakdown is byproduct of high temps so regardless of oil brand that can happen outside of normal operating parameters - 8 out of 10 ski motors fail from water ingestion due to fat ass clowns tipping the ski over trying to get back on it and not running the ski hard and long enough after a water ingestion event or the old 951 motor that decides to make itself water injection via faulty manifold gaskets = rust on the crank bearings - after that it could be 20 or 200 hours till it grenades. Most other end up sticking a piston @ WOT from not paying attention to the motor and cooling system/temps

@theblishknovk 26 күн бұрын

$1700 for engone build? Is that in parts or do you mean parts and shop labor?

@TodayWeWrench 24 күн бұрын

No, thats in quality parts, good machine work, bead blasting, and painting. New crankshaft, rebuilt counter balance assembly, new top end with boring, machined RV cover back to OEM spec, gasket set, etc

@theblishknovk 24 күн бұрын

@@TodayWeWrench oh that makes sense.

@user-bt9sj1hd7q Ай бұрын

How much

@TodayWeWrench Ай бұрын

How much for what?

@georgemurphy9910 2 ай бұрын

Buy a new one Buy an older one expect to fix something on it👍👍

@TodayWeWrench 2 ай бұрын

15k vs 2500? Or are you talking about a junk Spark thats all plastic left over from plastic bottles?

@tyronetrump1612 Күн бұрын

@@TodayWeWrench hahahah thats funny as hell with the plastic thing... and very true. Besides no one is making anything challenging to ride anymore like the B1, HX and X4 hulls- everything is geared to fat and inexperienced people who want a couch to ride and their main trick is to go really fast in a straight line. At least they still make stand ups