2 Things GUARANTEED to FAIL On Your HARLEY! MOD THIS NOW 👍

Рет қаралды 95,263

3 ай бұрын

It's not a question of when your stock Harley shifter linkage will fail, but when. And when that happens, you'll be left stranded, likely in the middle of nowhere. You need to get a good quality shift linkage that uses sturdy & reliable heim joints. We highly recommend Kuryakyn shift linkage as we've tested it for over 10 years and thousands of miles.
✅ GET KURYAKYN SHIFT LINKAGE FROM THE LAW ABIDING BIKER STORE ✅
➜ shop.lawabidingbiker.com/prod...
👕 GET A HOODIE AND OTHER SWAG 👕
shop.lawabidingbiker.com/coll...
✔ DETAILED KURYAKYN SHIFT LINKAGE INSTALL VIDEO ✔
➜ • Harley Shifter Linkage...
✔ SHIFTER SHAFT ARM VIDEO ✔
➜ • Harley Shifter Shaft, ...
🛠️ GET A CRUZ TOOLS RTH3 TRAVEL TOOL KIT FOR HARLEY OR METRIC 🛠️
➜ shop.lawabidingbiker.com/sear...
⚠️⚠️ YOU SHOULD REPLACE THIS SAFETY ITEM IMMEDIATELY ON YOUR HARLEY ⚠️⚠️
➜ • The FIRST SAFETY MOD I...
HELP SUPPORT US! JOIN THE BIKER REVOLUTION! #BikerRevolution #LawAbidingBiker #Bikaholics #RyanUrlacher
🛒 SHOP IN THE LAW ABIDING BIKER STORE 🛒
shop.lawabidingbiker.com
😎 BECOME A MEMBER AND GET BENEFITS 😎
/ lawabidingbiker
📹 GET PREMIUM MOTORCYCLE TUTORIAL VIDEOS 📹
www.lawabidingbiker.com/buyvi...
🎬 WATCH OUR MOTORCYCLE DOCUMENTARY FILMS HERE🎬
www.lawabidingbiker.com/motor...
💰LEAVE A FLAT DONATION 💰
www.lawabidingbiker.com/donate
📱SHOP AMAZON RECOMMENDED PRODUCTS 📱
www.amazon.com/shop/ryanurlacher
📺 SUBSCRIBE TO OUR KZfaq CHANNEL 📺
goo.gl/EtxUnW
🎙CHECK OUT THE WEEKLY PODCAST 🎙
www.lawabidingbiker.com/app
ⓕ FOLLOW US ON FACEBOOK ⓕ
/ lawabidingbiker
🐦 FOLLOW US ON TWITTER 🐦
/ lawabidingbiker
📷 FOLLOW US ON INSTAGRAM 📷
/ lawabidingbiker
🙈 FOLLOW US ON TIKTOK 🙈
/ lawabidingbiker

Пікірлер: 249

@RyanUrlacher 3 ай бұрын

SUPPORT US AND GET KURAYAKYN SHIFT LINKAGE IN OUR STORE 👉 shop.lawabidingbiker.com/products/kuryakyn-shift-linkage-for-harley-davidson-sculpted-gloss-black?variant=42108387262620 HELP SUPPORT US! JOIN THE BIKER REVOLUTION! #BikerRevolution #LawAbidingBiker #Bikaholics #RyanUrlacher 🛒 SHOP IN THE LAW ABIDING BIKER STORE 🛒 shop.lawabidingbiker.com 😎 BECOME A MEMBER AND GET BENEFITS 😎 www.patreon.com/lawabidingbiker 📹 GET PREMIUM MOTORCYCLE TUTORIAL VIDEOS 📹 www.lawabidingbiker.com/buyvideos 🎬 WATCH OUR MOTORCYCLE DOCUMENTARY FILMS HERE🎬 www.lawabidingbiker.com/motorcycle-documentary-films 💰LEAVE A FLAT DONATION 💰 www.lawabidingbiker.com/donate 📱SHOP AMAZON RECOMMENDED PRODUCTS 📱 www.amazon.com/shop/ryanurlacher 📺 SUBSCRIBE TO OUR KZfaq CHANNEL 📺 goo.gl/EtxUnW 🎙CHECK OUT THE WEEKLY PODCAST 🎙 www.lawabidingbiker.com/app ⓕ FOLLOW US ON FACEBOOK ⓕ facebook.com/lawabidingbiker 🐦 FOLLOW US ON TWITTER 🐦 twitter.com/LawAbidingBiker 📷 FOLLOW US ON INSTAGRAM 📷 instagram.com/LawAbidingBiker 🙈 FOLLOW US ON TIKTOK 🙈 www.tiktok.com/@lawabidingbiker

@ingemarnilsson5498 3 ай бұрын

I’ve riding Harley since 40 years back. I’ve never had any problem like this.

@MrChancebozey 3 ай бұрын

I too have never heard of shift linkage or arms coming loose or breaking in my 30 plus years of riding. Neither me nor anyone I have rode with ever had these problems you describe. Periodically check all your fasteners is good advice.

@RyanUrlacher 3 ай бұрын

Glad it hasn't happened to you yet. check out the overwhelming comments on this video of riders it's happened to over many years. It's a widespread issue ==> kzfaq.info/get/bejne/la16rcJ7na_LoX0.html

@docholiday1034 3 ай бұрын

88,000 on one evo never a problem. 74,000 on the twink never a problem. 67,000 on the 2017 m8 no problem. I have seen it happen on bikes not maintained. In my shop probably done 5 in 40 years. Guess your just lucky 🤣

@markhobson5628 3 ай бұрын

It’s happened to me in the middle of a ride

@johnholley7749 3 ай бұрын

Amen, proper maintenance and inspections of your ride, and she'll last you a lifetime.

@frankmarkovcijr5459 3 ай бұрын

I am so glad 😊 l have a great Sportster 883. I have had my Sportster for 25 years and 400,000 miles on the original engine and 37 back tires and 17 front ones and 3 belts in 25 years. She is my daily driver as I don't have a car. I have had my Triumph Tr-6 with a hard tail and magneto for 40 years. When she was 50 years old she needed new camshafts we split the cases and new ones and changed the sludge trap. Put her back together and now she is good for another 50 years. It's a shame that HD big twins have so many quality issues for such a expensive motorcycle 😢.

@DG-hb8rh 3 ай бұрын

Rock on sportsters ! , 94k + on my 02

@timblackburne77 2 ай бұрын

Ive got 135,000kms on my 09 Nightster, still mint

@mojo4376 3 ай бұрын

Uhhhhh….why doesn’t Harley fix these known problem things. They charge enough for the bike.

@RyanUrlacher 3 ай бұрын

I know, same as BMW and others. There are just some things like this that have to be changed. I certainly wish it were not the case.

@jamessouthworth1699 3 ай бұрын

This is another reason why I will never trade mine in for a new one. After replacing way too many parts on the one I have I don't ever want to start over from scratch...not at the premium price the Harley charges for unfinished bikes.

@pariah_Ftw 3 ай бұрын

Why don't they fix them?...$ that's why

@MrDoyle07 3 ай бұрын

How many motorcycles have you had that will last you your entires adut life? Let us call that 40 years. You pay 30,000 dollars for a pretty well loaded one. That is 750 dollars a year. I've had 12 or 14 metric bikes... not one of them has lasted even 8 years. They just wear out. Nearsighted people get to bothering the vibrations of life. Stop being a bad vibration.

@johndrake1966 3 ай бұрын

Defective water pump 700 bucks the m8 2017 -2019 defective oil pumps,cam chain tensioners ,eco cam bearings the list goes on 😢and on😂

@shep68 3 ай бұрын

Yep my OEM linkage failed riding down the highway. I got lucky and the nut and bolt came loose rather than the ball socket popping. So I hand tightened and made it home. Ended up swapping with a Heim joint linkage sold by Kustom Cycle Parts on Amazon. Company out of Nebraska I believe. Anodized billet aluminum. And they will engrave so you can customize. I also replaced the shift arm, shaft and those shaft bushings that require a special bearing tool. But the end result is much more stable and failure-proof. So if Kury stops making these, there are other options.

@toddthepanamericanbrooks888 3 ай бұрын

Thanks Ryan I bought two and the discount code is still good! I appreciate you and all you do for us Bikers!

@davidpelletier7409 3 ай бұрын

I had my shift linkage fail last summer half way through a 10 day ride. thankfully I did notice on my pre ride check i was getting some movement in the linkage before heading on on the ride. I recalled your video about this Ryan. on day 2 of the ride just happen to stop in a HD dealership to check things out. while there i checked with service department and picked up a new shifter linkage. Planning to swap it out once I got home. Well on around Day 5 of the ride it failed , and thankfully between myself an the buddies i was riding with , I was able to swap it out , and get back on the road in about 1/2 hour. Thanks Ryan love the videos. you save me some hardship and let me get back on my bike to enjoy the ride.

@RyanUrlacher 3 ай бұрын

Just awesome story. Thanks for sharing. That's my aim, is just to help bikers know about stuff like this, so they aren't stranded.

@heybruh3274 3 ай бұрын

That Kuryakyn shift linkage is a nice piece. I replaced my OEM shifter and also used the Thrashin Supply shift lever. A very nice setup!

@dpricher01 3 ай бұрын

Thanks, Brother !! Had not thought of that. Ordered it right away.

@RyanUrlacher 3 ай бұрын

Very cool!! Thx

@geoffluck 2 ай бұрын

Love your stuff here in the UK, this reminds me of my next task, I fabricate stuff like this just for myself, mines an 08 Dyna, suspension sorted, cammed, followers,oil pump etc,primary sorted throughout, these little things can be a big downer on a run, thank you😊

@CJCon885 3 ай бұрын

Thanks for the info. Just subscribed!!

@RyanUrlacher 3 ай бұрын

Thanks for the sub!

@garyehrhardt3136 3 ай бұрын

Great information ty 🇺🇸

@leewarry8641 3 ай бұрын

Did 100 k on evo not a problem with shifter rod but I grease it when doing service.same as my street bob 30 k & not a problem .just a tiny bit of grease does wonders .thats why I do all my own work shops skip the small things same as gear shifter & break peddles grease there pivot points .just like you should lube cables witch is another thing shops don’t do .

@Mark-mm1ke 3 ай бұрын

While it's never happened to me, more about the number of miles on the bikes, but it did to one of my riding buddies on a long ride. I've been thinking about changing it anyway just for fun and making my bike more personal. This decided it for me. Just ordered on. Thanks for the discount. Very appriciated.

@ricardopr54 3 ай бұрын

Thank you for this video. You helped me scratch Harley-Davidson off my new bike prospects.

@DG-hb8rh 3 ай бұрын

Was thinking of the shift shift linkage for a while now , just ben putting it off, was gonna buy factory but haven't seen one i liked and didn't know if one from the dealership would've ben same as one that came on my bike ? your video just reminded and convinced me seen one i liked. I just ordered one black and raw . thank you

@RyanUrlacher 3 ай бұрын

Rock on. Thanks for your support. I don't want anyone to be stranded like so many bikers are when this happens.

@twowheelcagefreeliving.5906 3 ай бұрын

Bought one from you and kicking myself for not doing this in the past. No lugging or clunking like OEM, what a freaking difference. Took 10 minutes to change out.

@glennhurst7659 3 ай бұрын

Just replaced mine a week ago with a billet Aluminum chrome plated one. Looks great and inspected the shift arm too all is good. 08 SG just turned 70K miles...

@firesquad0155 3 ай бұрын

I just ordered my linkage thanks looking forward to installing it soon

@RyanUrlacher 3 ай бұрын

Right on! Thx

@jameslyons1661 2 ай бұрын

Great info 💙🏁💙

@billyjones3787 3 ай бұрын

I replaced the rod ends with heim joints years ago but retained the stock pushrod. The rod is not the weak link, the rod ends are. I bought rod ends from McMaster Carr, a huge parts house for everything industrial. I keep one of the old stock rod ends in my tool pouch in case another rider has a stock one fail on the road. I had to replace my worn out rear shift arm last summer. On six speed bikes it’s an easy replacement, older 5 speeds requires the primary cases to be removed. Check the fasteners on front and back arms with a torque wrench at each fluid change.

@RyanUrlacher 3 ай бұрын

Correct. Pressed ball and socket/stock.

@erichaagen9973 3 ай бұрын

haven't had a failure yet, but Thanks for bringing this up so I don't have a failure out on the road.

@30pvfd 2 ай бұрын

I got mine in the mail today thanks 👍👍👍👍plus the two stickers bonus

@30pvfd 2 ай бұрын

Dam I missed out on that code

@twowheelcagefreeliving.5906 3 ай бұрын

Purchased one tonight from your store. Thank you for the discount.

@RyanUrlacher 3 ай бұрын

Absolutely. Thanks for your support.

@timothyfrankfother4108 3 ай бұрын

Iam so happy I just bought a 2002 Dyna Wide glid non running in really great shape chrome and paint really nice got it for 1300 on ebay auction. What I've found so far is broken cam gear on crankshaft got more to investigate of course but I have a good looking bike to work with.

@frankburdi1001 3 ай бұрын

I appreciate all the help that you give to people with big twins. With all the trouble with big twins across the board I just keep driving my trouble-free Evo Sportster. Amen

@RyanUrlacher 3 ай бұрын

Rock on.

@243wayne1 3 ай бұрын

@@RyanUrlacher Yes. Thank you for this very helpful video and tip Ryan!

@raymondwilliams5661 3 ай бұрын

Ride mate not driving.

@Greenjeans2020 3 ай бұрын

At the start of a long trip mine fell off. Tied it up with Para Cord and drove straight to the dealer. Install a Gimble bearing type and used it on my 2012 Ultra and now on my 2020 TriGlide.

@exexpat11 2 ай бұрын

Replaced mine when I moved my mid controls to forward. Also put some Loctite on the threads on (Sportster) the nuts don't back off during vibration. Shaft arm - other of a different design than that. Those linkages are very beefy! I like those! Cut out Roland Sands style.

@regorschneid5245 3 ай бұрын

Back in 2006 my shift rod failed 2400 miles from home at a stop sign. I packed along cable ties which worked to get me moving again. Replacement has always been the number one item for my Harleys since.

@rodx5571 3 ай бұрын

I feel you on the linkage failure. I zip tied my linkage in 2015, I replaced the zip tie last year 2023 in Nebraska (i run South Texas to Sturgis). No need for a shifter replacement. I just carry plenty of handcuff grade zip ties. Also bring black gorilla tape.

@nelsongn9 Ай бұрын

wow. did zipties really work?? i have a 2013 ultra, always concerned about breakdowns far from home

@rodx5571 Ай бұрын

@@nelsongn9 yep. Zip ties really held it together Nut came off on front of primary. slid out. I zip tied as an emergency. It held indefinitely. Then the pivot above that came apart, zip tied that too. Many years ago. Might replace it some day. I have 2000 FLHTCUI. Note: 70k on Magnetti Marelli electronics. No issues. EDIT: not every issue can be fixed on the road, but for the ones that can, gorilla tape, Zip ties, and superglue is worth every square inch it takes up in the saddle bag.

@carellim 3 ай бұрын

Haven't had the shift linkage fail but I have had the shifter shaft fail on a long ride. A lace from my wife's extra pair of boots worked find to upshift. I'd rev it, pull in the clutch and tell her to shift and she'd pull back on the shoe lace. Luckily it would still catch to down shift to get to the next dealer for repair. It's made a good story over the years!

@RyanUrlacher 3 ай бұрын

Yup I had the shifter shaft issues as tons of other bikers have. Check this out ==> kzfaq.info/get/bejne/la16rcJ7na_LoX0.html

@SCBiker58 3 ай бұрын

My first Harley was a 2003 Anniversary Road Glide and my wife and I were on a ride but headed home and was maybe 5 miles from home and that shift linkage broke. I was lucky I was in 2nd and we made it home. I have since had 2 new Harleys and it s one the first mods I make.

@freddie_ray1498 3 ай бұрын

I changed it on my 2012 FLHTK like 9 years ago. It didn't fail but it was a POS...As for the shift shaft arm, I carry a spare in my Cruz Tool Bag..

@maury8441 3 ай бұрын

Had mine fail on a trip to Sturgis, it stripped coming into Missoula in the evening. Rode it through the night to Billings HD and had it fixed under warranty. Had to shift by hand all the way to the dealership.

@RyanUrlacher 3 ай бұрын

Yeah bro, I've been there. Hand shifting to get to where you need to. LOL!! thanks for sharing.

@vics8873 3 ай бұрын

Love that toolkit!

@RyanUrlacher 3 ай бұрын

Rock on! We've used it on many long distance trips to get us back on the road.

@randycoons1808 3 ай бұрын

Just ordered mine up! Great imfo. Mine is good to go, but trying to be proactive, I'm getting mine while I can. Great video

@RyanUrlacher 3 ай бұрын

Totally, I bought a 2024 Street Glide 2 weeks ago and I'm replacing it tomorrow. NO reason to get stranded. THANKS FOR SHOPPING IN OUR STORE!

@rodgerbambauer123 3 ай бұрын

The ball & socket joints failed after 8 years on my Road King so I went to Ace Hardware and picked up 2 heim joints installed them on the stock shift rod. Shifts just fine. Cost ? $10.

@b2db.fisher 3 ай бұрын

I just went down to my local hardware store and bought two Heim joints with the same thread pitch. Sixteen dollars and done. Got a matching bolt for the rear.

@gvs1173 3 ай бұрын

Happened to me too, coincidentally on a long trip. Didn't have the tool kit, but the NAPA in the next town had bailing wire. 45 minutes later we were down the road

@RyanUrlacher 3 ай бұрын

Thanks for sharing!!

@johnholbrook2482 3 ай бұрын

I own a 2007 RG. My shift linkage is ALL stock. I have the bike since Memorial Day weekend 2007. I have over 103K miles on the bike. I clean and lube all pivot points at every service level. I have not had an issue with the shift linkage. I am now replacing inner primary seal and gasket. Also the shift shaft seal into tyranny. I will probably get a new linkage now and replace the stock one for astetics and prevent an issue this season. JRH

@petelaporte9475 3 ай бұрын

Tried to purchase a shift linkage from your store. Unfortunately you dont ship to UK. Luckily I found them available from ARH Customs in the UK.

@user-ru5oi7sc4w Ай бұрын

I had the stock one fail on me out in the middle of nowhere but I managed to zip tie it back together to get home so Yes get a better one asap

@billchaney9575 3 ай бұрын

Agreed. the stock linkage rods do fail. We always upgrade to custom rods with real Heim joints. However along with tools, I carry a complete (nearly new) stock linkage rod in the bottom of my bag.

@RyanUrlacher 3 ай бұрын

Roger that. We too carry an old linkage just as a backup. Thanks for watching.

@eddiebones20 3 ай бұрын

05 Softail and my linkage "fell off" thankfully while washing my bike in the driveway amd not at speed in LA traffic. Was really surprised how cheap amd janky this part is compared to the replacement. I guess its fine for the low mile donut shop rider, but not for a daily rider that will see many miles.

@randyvaught2842 3 ай бұрын

Yep mine failed going thru Ark . Ball joint came apart . Good thing was my boot laces were a little long so I cut about 10 in off my boot laces a tied it on. It got me back home in southeast Texas.

@RyanUrlacher 3 ай бұрын

Thanks for sharing!!

@Tryke_Ryder 3 ай бұрын

I changed mine to Heim joints before the first ride. I carry the stock joints in my kit in case someone needs them on the road.

@RT22-pb2pp 3 ай бұрын

Another harley fix the videos never end. What part on a harley does not need replacing to make it work right?

@Ray-ln7gx 3 ай бұрын

I just saw this video today. I have a 2023 Road glide. Do the 2023 Harley's have this same issues with these 2 parts, and if so approx what is amount of milage on the bike are we talking about that this problem may occur?

@CJ-Foygelo 3 ай бұрын

Oh boy are you right about the shifter shaft arm and the linkage going bad at the worst time. I had the shaft arm splines go bad on my ‘15 RG on my way to Laconia last year. Coming out of a toll booth it failed. I could only get into first and second gear. By the grace of god I was only a few miles from Manchester HD. I was able to ride to the dealer and change out the shaft arm and the linkage in the parking lot.

@RyanUrlacher 3 ай бұрын

Thanks for sharing.

@odnalro40 3 ай бұрын

Roosta from Chicago: My linkage went out while I was in Arkansas riding the Ozark mountains; took it to Pigtrail Harley Davidson for repair.

@trublupennstatefan1438 3 ай бұрын

Just bought one Ryan. Thanks for your video. Is the sticker shift bracket you also mention one from HD or aftermarket company? I have a 2014 SGS.

@RyanUrlacher 3 ай бұрын

The shifter shaft arm is OEM ==> kzfaq.info/get/bejne/la16rcJ7na_LoX0.html

@user-gv5ki2sf9m 3 ай бұрын

I have an 04 Electra and I'm going through the gear shafts annually. The teeth on the inside of the shaft (closest to the motor) keep getting stripped. This time around, I noticed the bolt threads are also chewed up, so I am replacing that too. I've done the blue loctite and checked everything else. I just cant figure out why this keeps happening. I've had to make it home with zip ties several times now and I'm looking for answers!

@jasonbreedlove495 3 ай бұрын

Quality parts for sure. It's one of the first thingsnI swap out. Softbrake has some good options as well. Awesome hoodie

@RyanUrlacher 3 ай бұрын

Right on

@RyanUrlacher 3 ай бұрын

shop.lawabidingbiker.com/collections/supportgear

@matthewheidenreich3401 3 ай бұрын

I just changed to heim joints. Went 80,100 miles on my 08 stock joints. Just sayn. But, the heim joint is more solid for sure.

@robdedgar 3 ай бұрын

Haven't had any issues with my 21 RG but purchased one to match my sexier floor boards :D

@RyanUrlacher 3 ай бұрын

Nice!! Now you won't have a problem for sure

@danieldenhart6525 3 ай бұрын

Thanks!

@RyanUrlacher 3 ай бұрын

Thanks so much for the donation!!!!!!!

@stephendrake8145 3 ай бұрын

Yup, this has been a problem with Harley for years, only the CVO's have the shift rod with Heim joints...

@RyanUrlacher 3 ай бұрын

Yup

@jimbo4260 3 ай бұрын

42k....I get helm joints. Lol

@joshnielsen6429 3 ай бұрын

I just replaced the heim joints on mine bought from Fleetfarm !!

@bothetinman772 3 ай бұрын

What if your Harley has mid controls with something like an S shaped linkage.

@oldmanbiker2 3 ай бұрын

Wouldn't the linkage start to feel sloppy before it fails if it's a wear issue?

@donaldmiller5416 2 ай бұрын

Looks like you are sold out of the Chrome linkage. Any chance you will have more of this one or is that it?

@hardluckharris 3 ай бұрын

Im on my fourth Harley. I've never had a shift linkage fail

@jimsheldonswe7846 2 ай бұрын

It’s good you share these valuable tips but makes you wonder why a bike that costs like a Harley would not fix all the known problems.

@Ride_0n 3 ай бұрын

I've got 75k on my '07 Road King and I've had no problems with the shifter parts. I'd have way more miles on it, but I gotta share the love with my other bikes. 🤷🏻‍♂

@patrickoddi9625 Ай бұрын

Do you have the arm to go with the linkage ?

@brendan_13 3 ай бұрын

I’ve never had a shifter link fail, but the OEM one is definitely one of the things that I change out because it looks cheap and crap.

@u.s.aarchangelforgod3679 3 ай бұрын

Solid TY

@RyanUrlacher 3 ай бұрын

U bethca

@petev.9357 3 ай бұрын

That looks exactly like a tie rod end on my MTD lawn tractor! I keep spares around, they let go all the time. Jeez, come from the same factory?

@1kzrider 3 ай бұрын

Yup My 03 failed on a trip. My 2018 SG I wouldn't take it home until they swapped that part.

@johnwillia339 3 ай бұрын

What about the trans lever ?

@glennbellman1100 3 ай бұрын

Made my shift linkage 2 years ago with heim rod ends.

@lawrencebrandt8448 3 ай бұрын

true that I have Brocken 2 on my bikes ,one went bad at only 5k miles .

@michaelbucci9196 2 ай бұрын

I am trying to puchase a sculpted chrome linkage, part #9677. Your store says "full stock", but only Groove black is available for purchase. Do you actually have these or are you still out of them? thank you

@patrickoddi9625 Ай бұрын

When your rth3 kit is in stock please let me know, I'm waiting. 😎✌

@PainterD54 3 ай бұрын

Looks like Locktite is your friend with those bikes!

@dansklenicka8403 3 ай бұрын

Happen to me shift lever came loose on a long trip “Iowa to Dallas” last 20-miles. Was Able to fix it and get home..

@RyanUrlacher 3 ай бұрын

Thanks for sharing

@michaelhill1107 3 ай бұрын

There's a shop called Baker Custom Inc that has a wide selection if needed... U.S based .. I want to say California.. they had a Vendor set up at Ohio Bike Week last year and were packing up when I stumbled across them ... They stopped and took the time to set me up for both my RG and the wife's Dyna ... If Kuryakin becomes unavailable.. might be a viable option., ... Ride em, don't hide em y'all

@SuperdogRW713 3 ай бұрын

Liked Kurayakyn, easy search, had a cart full of good chrome stuff. Tucker not so much.

@Tumble96 3 ай бұрын

What about the Harley shifters?

@Dorque19 3 ай бұрын

Thank you for reminding me to change these two items. I fixed one before on a friends bike and he had less than 8000 miles. My zip ties worked great. I’ve put over 73000 miles on my bike and everything has been replaced “except” these two items. 😂

@RyanUrlacher 3 ай бұрын

Rock on!! Thanks for the comments.

@johnra1269 3 ай бұрын

I purchased one online. Aluminum with Maltese cross, “ Ebay“. When I received it, I thought it was plastic, I did the bite test 😂, it was a very cheap “Chinese“ aluminum. While on a ride, it split in half. I Thank God I had the original in my side bag and was able to change it out quickly then catch up for the ride. I learned my lesson from online aftermarket bike parts.

@RyanUrlacher 3 ай бұрын

Yah, Amazon is a beast for sure. Advertising so much knock of stuff these days. I feel your pain.

@johnstrickland9545 3 ай бұрын

I'm just going to go ahead and purchase two of them and also shifter arms and everything the whole thing the whole mechanism for the shifting things I'm going to purchase two of them and put them in the trunk in in case

@RyanUrlacher 3 ай бұрын

Good call

@danielsouthern411 3 ай бұрын

Mine failed when I was 100 miles from home.. just took a string from my backpack and tied it together and got home thank goodness

@SaltyPatriotHD 3 ай бұрын

Need more ride docs!

@RyanUrlacher 3 ай бұрын

TONS OF DOCS/ALWAYS. Playlist on this very channel and you can search the channel. Always go here and check ==> www.lawabidingbiker.com/ride-now

@Kenny-iq6zv Ай бұрын

And wheel bearing is a major one. Everyone I know had to replace them right away or had them seized up.

@CloudyFlyerRowdyNiemira 2 ай бұрын

Head hoggers, has the only ultimate fix as far as I know. The free play comes from the bushing inside the bike. The kit will give you a printed bushing to completely remove the "play". Paired with a good shifter linkage it will be more solid than stock with zero play.

@jacksidney3907 3 ай бұрын

Got my Kurayakyn linkage (chrome) in this week from your store and got it mounted, very pleased. Well made very good quality. Got the order in after 3 days. Got the 10 percent off too! Thank you Ryan.

@johndean6226 2 ай бұрын

been riding HD's for 48 yrs. and never had any problems with shift linkage

@30pvfd 2 ай бұрын

Yep had two of them fail

@ronadamson4595 3 ай бұрын

Are you gonna have the linkage to fit a 99 EVO heritage softtail classic with the capability of a bend for the Samson true dual exhaust in chrome?

@RyanUrlacher 3 ай бұрын

Here is the linkage and fitment info ==> shop.lawabidingbiker.com/products/kuryakyn-shift-linkage-for-harley-davidson-sculpted-gloss-black?variant=42821840076956

@mike7197 2 ай бұрын

Nothing for the most popular HD on the road (dyna)?

@philpfirrmann7729 3 ай бұрын

You should never have to replace the linkage rod , you don't need to hammer on it to shift gears. Adding a drop or two of oil to each of the the heim joint when your changing the oil, will make a world of difference in longevity. If you have to change the front shift lever, this is a good time to drill and tap a hole for a zerk fitting. They used to have them on touring bikes, but I guess Harley decided to not install them anymore. And every oil change , put a wrench on the rear shift lever clamp on the transmission bolt. If that gets loose and rounds out, it's a pita tp replace. The whole primary has to come off to remove it.,,,

@RyanUrlacher 3 ай бұрын

The stock don't have heim joints. Pressed ball and socket. Glad it hasn't happened to you YET. So many have dealt with this over the years. Here's some comments and info to see how wide spread it its ==> kzfaq.info/get/bejne/nKiin9BjsL2ZiKM.html

@rickrouland5406 3 ай бұрын

Change the shift arm with trashin ez shift arm

@chiefjoseph8154 3 ай бұрын

I now ride the Polaris Challenger. In all honesty I really never had any issues with the HD I owned other than scheduled maintenance. My last HD had 68k when I traded it. Brand loyalty blinds some people. There is no perfect motorcycle.

@RyanUrlacher 3 ай бұрын

Correct, no perfect motorcycle. I'm still searching.

@stevemiller6734 3 ай бұрын

60,000 + miles never replaced either of these, no problems. Honestly never heard of this problem until now

@RyanUrlacher 3 ай бұрын

Yah, definitely wide spread. Glad you've been a lucky one. Tons of comments on this video and other shift linkage and shift arm videos on this channel. Plus, it's happened to those around me and while on trips. Some do and some don't. I don't take chances anymore and just replace it.

@williampowell2722 3 ай бұрын

are you going to buy a new roadglide since you make a lot of long distance rides?

@kevindelk 3 ай бұрын

Don't forget about the plastic clutch cable adjuster. Metal replacement from fat baggers

@keithrjohnson7028 3 ай бұрын

One of the first things I changed on my heritage

@RyanUrlacher 3 ай бұрын

Rock on. Me too!!

@randyfinn561 3 ай бұрын

Had shift linkage replaced

@myself7630 3 ай бұрын

Mine gave out. Goo thing for duct tape. Rode that way for a couple of weeks.

@RyanUrlacher 3 ай бұрын

Rock on!! Love duct tape

@Hoyt1911A1 3 ай бұрын

Never had either of these parts actually fail on any of my several Harleys (going back to 1976) but I have had them get loose after many miles stack up. I just found out recently after trying to order a Kuryakyn brake pedal that they do not exits any more. They got bought out by Tucker Powersports. I can't seem to find any listing for current products from them. Anyone else know more info about their situation?

@RyanUrlacher 3 ай бұрын

A little wrong on that. We sell the heck out of the Kuryakyn extended brake pedal. So many, it's hard to keep in stock right now. I just did a video two weeks ago on them on this channel. Turn 14 bought out Tucker Rocky. We sold for both. Turn 14 now has the Kuryakyn brand. We are in direct contact with them all the time. We carry those Kuryakyn brake pedals Right in our store here ==> shop.lawabidingbiker.com/products/kuryakyn-girder-extended-brake-pedal-for-harley-touring-2014-and-up?variant=43161770459292