20$ Motorcycle Turn Signals from Amazon! - Yamaha FZ6 Street Fighter Build

Рет қаралды 31,924

3 жыл бұрын

I needed to pick up a set of turn signals for my FZ6, and found a set of super sweet sequential turn signals from Amazon for 20$! And they are actually pretty awesome for the price!
Sequential Signal Lights here - amzn.to/3KfB6cM
Follow my Socials:
/ tjwalt
/ wrecklessco
/ thaguyty

Пікірлер: 38

@obsgr1 Жыл бұрын

Great bike build. I had MotoGadget MBlaze Pin's at the front and an integrated brake/indicator on the rear that cleaned the back end up quite nicely!

@Beardchanics 3 жыл бұрын

They look really neat!

@smoke05s 2 жыл бұрын

What kind of exhaust tips are you going to put on there?

@TimGeersProductions 6 сағат бұрын

How did they hold up over 3 years?

@mateusznowakowski5895 11 ай бұрын

great video! how do these turn signals hold up over time? I'm thinking of buying them, but the reviews say they die very quickly

@johnycash769 3 ай бұрын

Hi ....I got the same signals for my zx6r 2023 .. everything was good but when I turn it off front an back signals are not working (not flashing at all) even is not flashing in the display ... do you think is because I didn't install a flash relay?

@jofke5591 4 ай бұрын

hi my turn signals dont go all the way, what can i do to make them work fully??

@sizzleweet 2 жыл бұрын

What do they look like in direct sun?

@unplastic880 Жыл бұрын

What size wire connectors is it??

@Taste_Budz 10 ай бұрын

Relay is recommended, the provided resistors get really hot

@JustinBarcroft 3 жыл бұрын

I went down on grass with my 05 and cracked/bent my fairing. I'll be doing a streetfighter conversion. Do you have solutions for mounting the speedo? I have the more round one. Also, what exhaust tips are you going to use?

@ThatGuyTyy 3 жыл бұрын

I didn’t actually do the conversion myself unfortunately so I don’t really have an solutions to offer. As for exhaust tips I haven’t really looked into any as I might need to get something custom as all slip on are gonna be too long/ too expensive for what I want to do.

@grosumihai9341 Жыл бұрын

hi I installed all 4 LED turn signals on my Yamaha yzf600r but all 4 turn signals light up when I chose left turn signal all 4 light up and the same when i chose right turn all 4 light up .. any idea how to fix ?? Thankyou.

@rowill-kx3zo Жыл бұрын

Hey I ran into the same issue, if your bike uses the same dash light for both the left and right. Current will reverse flow through the bulb and cut on the the opposite side. If you pull the bulb out it’ll work. Alternatively there’s 2 options, 1. Find a resistor and bridge the relay with the resistor 2. Easy option take a 4 prong led off Amazon and connect each print from the bulb to a positive node on the led then connect to ground and that should in theory fix it

@leonacheng1687 2 жыл бұрын

Any reason why the signal indicators and the signaling on the computer wouldn’t work when the bike is running?

@leonacheng1687 2 жыл бұрын

Im having this issue l, and am looking at replacing my lights. Unsure if I have a bigger issue!

@grosumihai9341 Жыл бұрын

hello i have a problem.. when i instal is flashing just first 2 leds not all 12 , but if i connect to the batery direct works full amd secvential .. why ??

@ThatGuyTyy Жыл бұрын

You need a hyper flash relay most likely

@grosumihai9341 Жыл бұрын

@@ThatGuyTyy i have relay : DC12V , can fm flaser , 50 c/m - 200 c/m , 21Wx2+3.4w but i did't conect yet

@Gunzoku 3 жыл бұрын

I literally have those exact same signals for my bike lmao

@ThatGuyTyy 3 жыл бұрын

like father like son

@chrisstokley7687 8 ай бұрын

i always bump/ break... so i got suzuki 650 /under the fender /omg.. no gets bumped! looks like 2 in 1 round 2 inches.. with a tag spot.. i luv em... front leds $199 china filled up with water /not sealed :>(

@BrunoTestes 2 жыл бұрын

great video, but I installed it on my bike and the light was flashing very fast, can you tell me why?

@ThatGuyTyy 2 жыл бұрын

Probably not the right signal relay for LED’s! I believe mine has an upgraded relay

@jawadulkarim9498 2 жыл бұрын

Look on the forums, get a turn signal resister for like 10-20 dollars

@bc-mr1si Жыл бұрын

fit a resistor to each indicator.👍

@Gtrjerry73 Жыл бұрын

White zip ties on black plastic.... in the open..

@oconnorskyler1 2 жыл бұрын

Down to the river side

@kristof3784 2 жыл бұрын

Hello, my problem is the led is flashing very fast

@James-nh3ge 2 жыл бұрын

You need a led relay. If your bike doesn't have led lights stock you need to switch out the relay for the timing.

@Noah-ht3bb 2 жыл бұрын

@@James-nh3ge hey, I have the same problem with my bike. Does it matter wich relay I buy, or do all relay for leds work?

@bc-mr1si Жыл бұрын

or fit resistors

@Xander-86 Жыл бұрын

Can you put them in the front?

@ThatGuyTyy Жыл бұрын

You could if you can make them fit I don’t see why not

@eg1789 Жыл бұрын

Tried those and theyre garbage. Not even bright.

@CHOPPER_TURK Жыл бұрын

did you use additional cable

@ThatGuyTyy Жыл бұрын

I did not need to no!

@marcenware0113 Жыл бұрын

American: Here is an iPhone for scale 🥲