2001 GMC Jimmy | Rough Country lift

  Рет қаралды 19,879

The Kcubed Story

The Kcubed Story

4 жыл бұрын

DISCLAIMER Content is aimed towards adults Rated PG
We bought a 2001 GMC Jimmy Diamond Edition for the wife a few months ago. she decided she wanted to lift it 6 inches. After digging through the interwebs we found a Touch Country 6in suspension lift kit. We made the purchase then put it on her Jimmy. This video shows most stops we took installing the kit. It ended up taking roughly 28 hours total. We ended up changing the front ball bearings and that took about 3-5 hours due to them being originals and being riveted in. All-in-all it was a fun learning experience and now she has her lifted vehicle that she loves!
Instagram: @kyrstynrheagoode
Facebook: / thekcubedstory
Twitter: @KyrstynGoode
Please don't forget to hit that Subscribe button if you want to be notified of upcoming videos. Give us a thumbs up if you enjoyed today's video and leave a comment letting us know what else you would like to see.

Пікірлер: 47
@nedaCFilms
@nedaCFilms Жыл бұрын
Awww, what a little cutie in the back lol.
@jeffklymman8609
@jeffklymman8609 4 жыл бұрын
Awesome job kyle! That car looks way better with those tires
@thekcubedstory940
@thekcubedstory940 4 жыл бұрын
It does! My friend did most of the work while I did the learning and replicate what he was doing on one side I did to the other.
@waltersteffensthezr2man431
@waltersteffensthezr2man431 3 жыл бұрын
Nice diamond edition 🙂 I put the same kit on my GMC Sonoma last year it took me about 16 total hours by myself!
@thekcubedstory940
@thekcubedstory940 3 жыл бұрын
Thanks! It took us more time due to not rushing and just taking our time.
@waltersteffensthezr2man431
@waltersteffensthezr2man431 3 жыл бұрын
Actually what took the most time for me was getting the correct cut on the diff the cooling fins had to keep taking it back out and putting it back in till I got it right LOL
@BENDOVER-xr8pc
@BENDOVER-xr8pc 2 жыл бұрын
@@waltersteffensthezr2man431 insta?
@thekcubedstory940
@thekcubedstory940 2 жыл бұрын
That was actually easy for us lol. Cut once lol
@blakebrass125
@blakebrass125 2 жыл бұрын
That looked like a shit ton of work lol. I like the end result. A little too high for my taste but it did look pretty nice in the end
@thekcubedstory940
@thekcubedstory940 2 жыл бұрын
It was a lot of work. But it wasn't too bad to be honest. The wife liked the look as well.
@OTLWReefer
@OTLWReefer 3 жыл бұрын
got a few jimmys i would get some 31s for it lot better off road
@baneblade48
@baneblade48 3 жыл бұрын
Awesome. Thanks for making the vid. I'm very tempted to do this on my 2001 Jimmy. It doesn't look half bad with those tires.
@explorationecho2366
@explorationecho2366 3 жыл бұрын
Where's the Jimmy clubs?
@scotquigley513
@scotquigley513 2 жыл бұрын
Great build, looks awesome! I really want to relocate my rear end under my leaf springs. What was the kit you used?
@xGSxPhatal
@xGSxPhatal 2 жыл бұрын
What bull bar do you have on there?
@BENDOVER-xr8pc
@BENDOVER-xr8pc 2 жыл бұрын
can this kit work with a blazer as well?
@thekcubedstory940
@thekcubedstory940 2 жыл бұрын
Check their webpage. I think they have something for the blazer. But it might be the same exact setup.
@sam20_02
@sam20_02 2 жыл бұрын
yes
@raulmarin8704
@raulmarin8704 2 жыл бұрын
How many miles in that
@mattbaker3861
@mattbaker3861 3 жыл бұрын
Did you have to put any brake line extensions in or anything like that? Driveshaft and axels still bolt up easily?
@thekcubedstory940
@thekcubedstory940 3 жыл бұрын
Had to put in break line extensions but they have with the kit. Everything else basically bolts back up.
@mattbaker3861
@mattbaker3861 3 жыл бұрын
@@thekcubedstory940 thanks buddy looking to do this to mine this winter! Any tips or heads up I should know about?
@thekcubedstory940
@thekcubedstory940 3 жыл бұрын
To be honest I didn't do much of the work. My buddy did. I was more or less there for support and learning. I am not mechanically inclined but thought it was pretty straightforward. As long as you have some inclination of how to work on cars you should be good.
@sanchezgeorge29
@sanchezgeorge29 2 жыл бұрын
How has the truck held up any issues with the gearing running the 33s daily?
@thekcubedstory940
@thekcubedstory940 2 жыл бұрын
We ended up selling it last December so not sure since then. But until we sold it, it held up well.
@billgoldenmusic
@billgoldenmusic 3 жыл бұрын
Nice, how are your doors so nice? My hinges are so messed up and I've already replaced them once. Bad design from factory.
@thekcubedstory940
@thekcubedstory940 3 жыл бұрын
We only ever had issues with the passenger side. But even then it wasn't bad at all.
@scotquigley513
@scotquigley513 2 жыл бұрын
I'm about to do mine for the third time, since I've owned the truck.
@MoodyDudey
@MoodyDudey 3 жыл бұрын
Y’all reused the factory control arms? You’re supposed to use after market ones from Rough Country because the older ones sit too low. There will be too much tension on the ball joints. How did it work out?
@thekcubedstory940
@thekcubedstory940 3 жыл бұрын
We did reuse them. However the kit comes with brackets that lower the mounting points for the factory control arms. It worked out great to be honest.
@soullesscat365
@soullesscat365 3 жыл бұрын
I personally own a 2000 diamond edition with no rust on it and 98k miles and i want pit new suspensions parts on to make it ride smoother but all i can find is people lifting them.
@ronreece89
@ronreece89 2 жыл бұрын
Putting this same lift on what tire size are you running
@thekcubedstory940
@thekcubedstory940 2 жыл бұрын
To be honest I can't remember if we did 32s or 33s. We sold the truck a few months ago otherwise I would like. Sorry!
@BigNerdLandon
@BigNerdLandon 3 жыл бұрын
Is the vehicle right hand drive or is the camera mirrored?
@thekcubedstory940
@thekcubedstory940 3 жыл бұрын
It is the normal American Left had drive vehicle.
@ReadingAreaRailfan
@ReadingAreaRailfan 2 жыл бұрын
Thank God they didn't do this to a square body s-15 jimmy
@victoracosta4020
@victoracosta4020 3 жыл бұрын
Where can I get that kit
@thekcubedstory940
@thekcubedstory940 3 жыл бұрын
It is a Rough Country Kit. Straight from Rough Country.
@hellcatrover7453
@hellcatrover7453 3 жыл бұрын
How long did this take I might do mine but idk yet
@thekcubedstory940
@thekcubedstory940 3 жыл бұрын
It took us about 28ish total hours. Probably could have done it quicker but we weren't trying to rush it.
@hellcatrover7453
@hellcatrover7453 3 жыл бұрын
@@thekcubedstory940 and I have one more question did you do a center console delete cuz your kid was walking around like it was a school bus 😂
@thekcubedstory940
@thekcubedstory940 3 жыл бұрын
Nah she was just crawling all over everything lol your typical 3 year old! Haha
@david95592
@david95592 Жыл бұрын
Nice job! Where are you located? I am in washington state. I need too do same my blazer! How much! Send me more info please.
@matthewcooney7713
@matthewcooney7713 3 жыл бұрын
I thought this was a video about lifting your truck I didn’t realize it was a video about a plumber. Buy longer shirts 👕
@08maybeoneday
@08maybeoneday 3 жыл бұрын
Consider it a bonus
@MoodyDudey
@MoodyDudey 3 жыл бұрын
😂😂🤣🤣
@JF-rf9fx
@JF-rf9fx 2 жыл бұрын
@@08maybeoneday blazer and booty what more could you ask for😌
6 inch rough country lift GMC Sonoma crew cab
3:41
Walt The ZR2 man
Рет қаралды 27 М.
Мы никогда не были так напуганы!
00:15
Аришнев
Рет қаралды 6 МЛН
Looks realistic #tiktok
00:22
Анастасия Тарасова
Рет қаралды 101 МЛН
THE POLICE TAKES ME! feat @PANDAGIRLOFFICIAL #shorts
00:31
PANDA BOI
Рет қаралды 25 МЛН
BEST TORSION KEY LIFT EVER!!
13:48
1ROAD
Рет қаралды 1 МЛН
The Blazer Lift Kit is Finished!
4:30
I AM CHEVY HAMPTON
Рет қаралды 22 М.
1995 GMC Jimmy SLE Review - A Lifelong Friend
10:24
Shooting Cars
Рет қаралды 8 М.
Why You Should Never JUST Install A Leveling Kit
19:46
Ratchet Wrenches
Рет қаралды 121 М.
1995 Chevy Blazer and GMC Jimmy | Retro Review
6:02
MotorWeek
Рет қаралды 50 М.
2000 Blazer Body Lift Install
16:30
OldSkoolSoldier
Рет қаралды 92 М.
Мы никогда не были так напуганы!
00:15
Аришнев
Рет қаралды 6 МЛН