Hello there! Sorry! It's on Episode 2 with the original wheels, and on Episode 3 when we mounted the new bigger wheels. Check out all Episodes on our channel. Thanks for watching and commenting!

Very welcome! Thanks for your comment and for watching our CRV Upgrade videos!

Certainly! Let’s explore the tire size compatibility for a 2005-2006 Honda CRV. Stock Tire Sizes: The original tire size for the 2005-2006 CRV is 215/65/16. If you’re considering larger tires, it’s essential to ensure they fit without rubbing against the fenders or suspension components. Larger Tire Options: Based on user experiences and discussions in forums, here are some options: 215/75/15: Some users have successfully used this size without any issues on stock rims. These tires are taller and wider than the stock ones. 225/70/16: This size should fit without problems on a 2004 CRV, which is similar to the 2005-2006 models. 225/75/16: While this size might fit, it could potentially rub when loaded or during tight turns. Considerations: Keep in mind that increasing tire width also affects the overall height/diameter. If you decide to go with larger tires, ensure proper clearance by checking the wheel offset and backspacing. Remember that CRVs have relatively low torque/HP ratings, so going too large may impact performance. In summary, while 225/75/16 might fit, it’s essential to verify clearance and consider the trade-offs. If you’re unsure, consulting a tire professional can help you make an informed decision. Our local Discount Tire store let us test fit our new wheels and tires before we purchased them. You could try to do the same. Thanks for watching, commenting, and subscribing to our KZfaq cannel! Enjoy your CRV modifications! 🚗🔧

Couldn't expect a more detailed answer. Thank you for taking the time i appreciate it!

Hello there! We have found that it is best to test the spacer with the new rim before ordering the full set. Discount Tire allowed us to do that before ordering the new rims, they had a 'dummy' test rim there. (We ordered the rims from Discount Tire.) Based on our test, I believe 5mm may not be enough additional space for the new wheel to clear the calipers. But test it to be sure. Thanks for watching, commenting, and subscribing to our channel!

Hello there. The rims that we used in our upgrade are posted in the description of episode 3. If you keep the stock rims, you do not need wheel spacers. Wheel spacers are only required on rims that have a different profile than the stock rims. A lift does not impact whether you need wheel spacers, only the type of new rims impacts it. Thanks for watching and commenting.

Hey there, absolutely, you can use wheel spacers on stock rims. Thanks for watching and commenting!

Hello there! The new wheels are shown on Episode 3 on our KZfaq channel. The complete specs for them are written in the Episode 3 description section. Thanks for watching and for commenting!!

Hello there! Thanks for the comment and good suggestion. You kind of see an after picture in episodes 2 and 3, but a side by side before and after would have been nice. Thanks for watching, commenting and subscribing to our channel!

thanks my guy💯

Hey there! I believe your physics theory may be correct! However, the purpose of lifting a Sports Utility Vehicle is for better off-road performance over rough terrain, not to attain better handling on paved roads. I don't think a lowered Honda CRV with even smaller wheels would do very well over rocky, uneven, off-road trails (the intended purpose of this lift). However, thanks for commenting and watching!

Rotational size or wheel size? Because 16 inch rims with a /45 would look stupid. To fill the arches well rim and/or tyre would need to grow.

Hello there! Factory studs are easily replaced with new. Very reversible. You would be surprised how often studs break while a tire shop is replacing tires, the studs are replaced without the customer even knowing. Thanks for watching and commenting!

I’m running a BFG k02 LT235/75/15 with stock 200k suspension and it does not rub on big bumps or turns I have a 02 fwd crv