Thanks! Your rubbing alcohol cleaning trick saved me at least $150.

I had an issue with the driver side door lock not engaging on my 2003 Escalade. Followed your steps and now works like a charm. You save me 179-200 dollars. Great Video!!

At 8:20 if you would, stress that the switch needs to snap in place . I didn't get mine right, and twice had to pull it. One side did click, but only made contact with the rear passenger window. This video saved me 150 bucks, THANKS!

John, just want to thank you again for this video. It did in fact cure the sporadic lazy master lock/unlock switch on the driver side. Just a suggestion to those who may be attempting this hack. I'd suggest that in spreading the sides of the switch enclosure to release the housing to get to the circuit boards that you might consider cutting some strips of thin corrugated cardboard (about 1/16 to 3/32 x 1/2 x 1 in.) one for each slot about 8 total. Insert a small flat tip screwdriver and slide the cardboard tab in next to the slot to keep the stays from preventing sliding the housing out. This should ensure that the housing will slide out easily. Remember...take your time...slowly ease the housing out...and be gentle in there !! :)

Great video thxs. You need to remove the door panel to unmount the control panel from the inside. There is a screw on the front that is accessible from inside the panel. I couldn’t lock my doors or control the passenger side window on my 2003 Chev Z71 but after following your instructions and cleaning up the contacts with alcohol wipes Voila she works again 👍

Great Video. My 2006 Yukon is very happy now with all the windows working and the door locks working. Thank You!

Same problem! This video literally saved me 130 dollars!

This fixed both my barely functional unlock switch and the loose/slow window switches. Both the rubber membrane and circuit board have to be cleaned very well. Thanks!

You made that look so easy!! I hope this fixes my issue with my window. Its gonna be scary to do but if it can save me 100 bucks on a new window switch ill do it.

Thank you John my lock button wasn't working. Took me a couple times doing it had to go back and make sure everything was on the board correctly. I put it on my 03 Chevy Avalanche. Your video saved me like $130 bucks. Thank you so much!!!!!

I was having problem of raising the front passenger window - works great now! Thank you!

Thanks for the video. Door locks and driver window wouldn't work properly. This video solved the problems.

Followed step by step. Works great now. Thank you so much!!

Good job. Very easy to follow comprehensive video. Thanks much!

Thanks, easy fix. I immediately saw the corrosion on the drivers window connection and also some minor corrosion on the other ones but they were working but probably not for long. Snapped it back together and viola! Up went the window!!!!

Just what I needed. Thanks!

Worked like a champ. Bro, you saved me some $$$

Thanks man, worked like a charm but I think I’ve dropped mine just about as many times as you did! Quality Motorola product they’re serviceable. 2003 Yukon is still king of the road.

Thank you for the instructional video. My 2003 Tahoe LT driver’s door lock switch wasn’t working. I took about 30 minutes to remove, fix as you described, and replaced. Works great! The forward plastic post which helps hold the assembly to the door panel was also snapped just as you suggested it wold be. Note: The assembly fits so snuggly into the door panel that that forward broken pin is actually redundant. Thanks again, sincerely, Dennis in Coeur d’Alene, ID

This work 4 me thanks man ur a lifesaver and cash saver!

Thanks! Saved me about $130 bucks, all the switches work great!!!!!!!

Thanks for showing me how, it worked well, saved me $$$....

Thank you....this was exactly the problem with my truck..

Thanks for the video!

Worked great thanks!

Dude thank you 🤝

Well done.

THANKS I HAVE 293 KI PROBABLY WILL FIX IT WITH YOUR INFO THANKS AGAIN DOC

Thank you

2003 avalanche, unlock not working on drivers side. Got it to program off pass side. Finicky thou. You have off-acc-run-start. I went hold unlock button, acc-run- acc -run let go unlock. doors auto lock-unlock. Hold down lock and unlock on fob till it works locks seem to take 30 seconds. it will erase all fobs that use to work so take next fob and hold lock-unlock till it starts working. Can program up to four fobs.May have try it a few times to get in program mode. Good luck.

I’m having problems with both unlocking at the door switch and the remote. Were you having problems from the remote as well? It’s hit and miss.

What is it call the white thing when you clip back in I broke me but I don't know what it's called

question...the plastic that's attached go door panel that plastic that's holds master switch in place mine is broke is that plastic piece replaceable thanx

I figured the screw out I just watched the video on how to get that one plug of with grey thing on it

That was easy... It's a shame 2001/2002 use a different switch... Impossible to take apart without breaking.

Please help!! I followed your instructions exactly. I even did the same thing on the passenger door. My passenger side windows still wont work. Any other suggestions?

WHY MUSIC GREAT INFO BUT CANT HEAR YOUR TEC MUSIC TO LOUD