2003 Toyota Corolla front suspension strut replacement - duralast suspension
Пікірлер: 28
@DarrenChen3 жыл бұрын
Well organized video! I like the prep-work that you did showing all of the needed tools.
@00Papyrus3 жыл бұрын
Man this video saved my @$$. Hitting those ruts on the highway at 130km/hour in the corolls royce and hearing the wheels eat away the inner wheel well lining...is ta thing of the past. Thanks Alan!
@markmorris2514 жыл бұрын
Nice job! I have a 2005 and need to do this to mine.
@rotax16993 жыл бұрын
Great job. I have on 06 and I’ll be doing it next weekend. Thanks much
@bobbybentley60383 жыл бұрын
What was the part number for the 2006?
@kemlogikal4240 Жыл бұрын
Toyota Corolla Front Strut Upper Nuts Torque Spec : 29 ft-lbs Toyota Corolla Front Strut Lower Bolts Torque Spec : 166 ft-lbs Toyota Corolla Front Stabilizer Endlink Torque Spec : 55 ft-lbs
@ZPDSurvival Жыл бұрын
Great Video. Anyone can do this. I replaced the lower control arm and balljoint plus the sway bar stabilizer and The rattling noise was still there. Needs a new strut. Thank You.
@georgedolmat4553 жыл бұрын
the music is annoying and makes it hard to follow but otherwise great video, thanks.
@dannysautorepair Жыл бұрын
Great video, I replaced mine on my Camry.
@glennphillips23933 жыл бұрын
You should loosen and retighten in a criss cross pattern on the wheels. I worked in a dealership for 13 years and that's how all the techs did it.
@freddyv75464 жыл бұрын
thanks, my Corolla has the same set up.
@jlin121210 ай бұрын
I wonder if you get an alignment afterward ? Or you can drive it as it is after the new struts ?
@Alans_Garage10 ай бұрын
You don't absolutely need to get an alignment if it isn't pulling to one side. It shouldn't because you're not changing the ride height or suspension geometry
@whats4dena19853 жыл бұрын
Any torque specs? Just hit it with an impact?
@kemlogikal4240 Жыл бұрын
Toyota Corolla Front Strut Upper Nuts Torque Spec : 29 ft-lbs Toyota Corolla Front Strut Lower Bolts Torque Spec : 166 ft-lbs Toyota Corolla Front Stabilizer Endlink Torque Spec : 55 ft-lbs
@bobbybentley60383 жыл бұрын
What was the part number for the struts with the duralast?
@abhirajgandhi29733 жыл бұрын
Hi, i have toyota corolla h2 1.8e 2004 model (same as video) model. How much costing of this suspension unit?
@Alans_Garage3 жыл бұрын
I don't remember the exact price but I think I got the suspension from advance auto
@sanBastian12310 ай бұрын
i wonder how that aftermarket autozone strut lasted. non oem, aftermarket i installed lasted just 30 months. How did u do?
@Alans_Garage10 ай бұрын
So far 4 years and going...
@txxvictorious4120 Жыл бұрын
Sway bar links def do not come undone that easy lol
@ericd8674 Жыл бұрын
He definitely didn’t have to make a run to Harbor Freight for that 1.5 ton racing jack and Flex Head Ratcheting Breaker Bar ahahaha
@corvuskurotori64842 жыл бұрын
I knew a guy named Tsai in the Navy. I can't tell if you're him or not by your voice and your picture is small on my screen. Were you ever a Hospital Corpsman?
@Alans_Garage2 жыл бұрын
No, I haven't served in the navy before
@subcool1762 Жыл бұрын
👍🏼👍🏼
@kctsp66314 жыл бұрын
Good video but very poor lighting also could have done it without the music, other then that good job.
@pauljohnson51163 жыл бұрын
I use floor jacks feel safer props to you using a factory jack lol