2004-2020 F150 Mammoth 2.5 Inch Front Leveling Kit Review & Install

Рет қаралды 143,719

4 жыл бұрын

Shop this Mammoth 2.5" Front Leveling Kit: amtrucks.at/2Qof8s7
Subscribe for Daily Ford Truck Videos: bit.ly/2pReEeg
Raise the front of your 2004-2020 Ford F-150 by 2.50 inches, to eliminate the original factory rake, with a Mammoth Front Leveling Kit. This Mammoth Kit will not only level out your F-150, but it will also increase the front end ground clearance as well.
These Mammoth Strut Spacers have been CNC-machined from aircraft grade billet aluminum for superior strength and durability. Mammoth then completes its Leveling spacers in a durable, black-anodized finish for good looks and long-lasting corrosion resistance.
Mammoth designed its Front Leveling Kit to be a straight forward, bolt-on install with no cutting or drilling required. With all the necessary hardware included, this Leveling Kit can be installed in about 2 hours time. amtrucks.at/2Qof8s7
Item T542566
----------------------------------------------------------------
🎞Subscribe for Daily Ford Truck Videos: bit.ly/2pReEeg
Stay in the loop for other truck content:
Instagram: bit.ly/2pReXWs
Facebook: bit.ly/2pBz6AC
AmericanTrucks.com is your home for everything Ford F150! We offer the top mods, price-matching, and have a team of the best Ford truck experts around.
💥 muscle.am/YTShopNow 💥

Пікірлер: 99

@DS_92 4 жыл бұрын

"carefully tap the rotor to dislodge it" Then proceeds to beat the remaining life out of the rotor lol

@MeZzZzZzZzZzZzZzZzZ 3 жыл бұрын

Firmmmmmmmly grasp it....FIRMLY GRASP IT!!

@ToughCowboy 3 жыл бұрын

High quality video - love at @3:26 in the video how you go through ALL the required AND optional but highly suggested tools used to do the job. Kudos and THANK YOU, wished every KZfaq video did this - and quality of KZfaq content would go even further up on helpful bar.

@percarlson927 Жыл бұрын

Such a detailed step-by-step and perfectly angeled video, never did I doubt where and how it was done! Thank you A+

@americantrucks Жыл бұрын

Thanks for watching! -Zach

@brotodile9740 4 жыл бұрын

"Carefully tap the rotor to dislodge it." - Ol Boy winds up like Babe Ruth.

@danielkustra9071 4 жыл бұрын

you literally took the words outta my mouth lmao. I paused the video to comment that and i seen your comment up top xD

@americantrucks 4 жыл бұрын

Sometimes you don't get the results you need when you ask it nicely. -Adam

@goakum3240 4 жыл бұрын

@@americantrucks Lol Adam you're a much better mechanic than a carpenter, like the old saying " You're like lightning , never hit the same spot twice". keep up the good work and I do appreciate your vids...

@ayopan4652 4 жыл бұрын

Nice Content

@benmcghan9207 3 жыл бұрын

F-150 all the way boys

@PeterEyamie 4 жыл бұрын

I just installed this myself on my 16 f150 xtr 4X. Have a little grinding noise which I’m hoping is just dirty on my rotors.

@el-hp1lj 3 жыл бұрын

jesus thats a ton of work for some spacers lol. if imma spend all day might as well change the struts completely to a better set

@NickG_14flhxs 2 жыл бұрын

Would strongly encourage watching the install for the Motofab mounts posted by American trucks if doing any leveling kit. This video missed a few key steps that are covered in the other video. Also many of the nut sizes are different.

@benmcghan9207 3 жыл бұрын

That dark blue Ford with chrome bumpers on it chrome wheels that's the one I want all the 5.08.

@benmcghan9207 3 жыл бұрын

5.0 Coyote engine is the one I would want my new Ford pickup truck

@benmcghan9207 3 жыл бұрын

Give me some chrome wheels on that new Ford pickup truck and a coyote engine in it that's a real Ford right there

@benmcghan9207 3 жыл бұрын

I drive an old Ford pickup truck with a 5.0 boss in it

@kjw882 3 жыл бұрын

So many unnecessary parts removed for these kits. I’ve done full coilover and coilover spacer leveling kits and never had to do half the stuff done in this video. None of my installs had any issues or caused any issues either.

@yeeeehaaawbuddy 2 ай бұрын

I agree. I didn't even use the pressure thing. WTF?

@mitchell8697 3 жыл бұрын

Do I need to install adjustable caster and camber bolts when I do this?

@justinrhymer7524 3 жыл бұрын

What is the difference in steps if your truck is 2 wheel drive? Just removing the rotor but skip vacuum stuff?

@greg925911 4 жыл бұрын

Just had mine done, the 2.5 was just little to much on my 2018 F150, remember one has to have a Wheel alignment after, I'll have to buy some Firestone Air Bags to level it out

@Sdm07120 4 жыл бұрын

So your saying you need to add to the rear after installing the 2.5 up front? Maybe like another 1'' or 1.5'' in the rear?

@my-names-justin987 2 жыл бұрын

so do u think it’s too much for the 2015 f150?

@ernestcote2836 3 жыл бұрын

Wait can you go back to step one? I got lost after the second step

@gabrielspencer2951 4 жыл бұрын

Can I fit a 22x12 -51 with a 33x21.5 setup with this?

@scottjohnson3570 4 жыл бұрын

Worth noting: if you have a two wheel drive there's a large locking nut for the rotor that is not reusable. Almost $20 each last time I did mine

@richardromero8909 Жыл бұрын

I have a 2023 f150 Tremor with this 2.5 inch lift (factory installed). When making a full turn or u-turn, the front end makes a single pop sound (during the turn) (sounds like a tie rod pop). Any idea why?

@my-names-justin987 2 жыл бұрын

will this fit on a 2015 f150 i don’t want this to be too much and have the front end stick up more then the baxk

@GhostshooterGames 2 жыл бұрын

I have 33x12.5R20 tires. The front of my truck measures 43 inches. How much would it be lifted?

@Danny-wt5xf 3 жыл бұрын

is it really needed to take off the brake caliper? Seems like you're adding alot more unneeded steps. Ive seen guys do it on the same year truck without removing brake caliper

@Travide 3 жыл бұрын

I have 33x12.5 stock height no running

@79dogface 3 жыл бұрын

Is the rust normal ?

@zeussantos2394 4 жыл бұрын

Do you guys have auto body shop around?

@TheGamingNation44 2 жыл бұрын

Anyone know what those rims are called?

@JamesJohnson-em9pc Жыл бұрын

How does that compare to the bds kit?

@teop7887 2 жыл бұрын

No rubbing?

@christianmartinez9741 3 жыл бұрын

What size are those tires?

@user-lo3dl1ew7o 3 жыл бұрын

What is the difference between both the 2.5 mammoth leveling kits on your site? This one runs around 40 while the other runs around 100. Is it just the difference in materials?

@teop7887 2 жыл бұрын

Correct.

@user-lo3dl1ew7o 3 жыл бұрын

What tires were those? Duratracs?

@charlie_5918 3 жыл бұрын

are 34s a safe bet with this level?

@joshcrosland8733 2 жыл бұрын

you failed to mention that you have to compress the coil and spin it to align with the offset of the spacer studs.

@murphygaven1 10 ай бұрын

Or you can swap the strut side to side same part

@moesobh245 3 жыл бұрын

Do I need to use a block in the back if I’m doing 2.5 levelling Kit in the front (Mammoth Kit)? No Haul at all. Thanks

@matthewcanavan8275 3 жыл бұрын

I bet that you do

@danwick237 2 жыл бұрын

I swwar that calipee looked straight back at me, twice!

@AiBilly 4 жыл бұрын

Not one of these how to`s have torque settings !!! I have looked everywhere for them. Anyone know where they are ?

@fallu2 3 жыл бұрын

look at 1a autos coil spring replacement video, they say it in there

@cw5205 3 жыл бұрын

What’s the labor estimate on something like this if you’re having it done at a local shop. I think it’s a little out of my league for DIY

@lookoutnow4996 3 жыл бұрын

I need to know, because this is definitely out of my league. Especially with the kind of luck that I have...

@rdsii64 3 жыл бұрын

I would like to see how well a truck leveled with this kit does off road. Nothing crazy just the normal stuff done with full sized trucks.

@respawnedlife 3 жыл бұрын

Well I bought my truck with a 3 inch leveling kit. Had to replace a bunch of stuff including the spacer. When I went to have the alignment done they couldn't get the camber correct. The tech said they see it all the time. He told me unless you're changing to an upgraded knuckle you're wasting your time and money.

@davidochoa651 3 жыл бұрын

Why does that truck not look leveled. Has more of a rake look in my opinion

@robertw1871 3 жыл бұрын

Look at all that rust, definitely a Ford

@drewplunket4779 3 жыл бұрын

This question may have already been asked but is there a reason why some leveling kits (or strut spacers) are $40 where others are $90 or even $100?

@teop7887 2 жыл бұрын

Material (steel vs aluminum) and build quality

@rclegends5557 4 жыл бұрын

Do you need to remove the knuckle to install the strut spacer?

@joshcrosland8733 2 жыл бұрын

no lol

@ch4390 4 жыл бұрын

Looking for a leveling kit 2.5 for my 2018 f-150 XLT any idea on what brand to get ?

@americantrucks 4 жыл бұрын

Rough Country, Mammoth, and Supreme Suspension are all solid choices for leveling spacers! -Zach

@nikkchandarlis9342 2 жыл бұрын

How much would this job cost at your shop?

@PrincipalityofZeon 9 ай бұрын

Smack the piss out of that inner tie rod At least you adjusted to the knuckle tho

@MrBullya 2 жыл бұрын

I seen the ford guy remove the strut just by removing the lower ball joint

@danielapolinar3067 3 жыл бұрын

If anyone is reading this. I have fully stock 2013 f150. I bought the leveling kit (2.5 inch) exactly the same ones from the video. Im have a concern. After installing it, my upper control arm is rubbing on the coil spring. I’m not sure why. Am I supposed to upgrade upper control arms too? Can anyone point towards the right direction.

@dylanhadeka9348 2 жыл бұрын

Did u ever figure out how to fix this cause this just happens to me after install and I have no clue what’s wrong or where to even start to fix it

@danielapolinar3067 2 жыл бұрын

@@dylanhadeka9348 no I haven’t. The black rubber boot popped

@OldManGoatHair.6985 4 жыл бұрын

Be safe kids, never reuse an old cotter pin. Always replace it with a new one.

@cap12206 3 жыл бұрын

What’s a cotter pin? He calls it a “retainer pin” lol. He also didn’t torque anything down, but gave a warning at the end for everything to be torqued. Kinda hard to do with a “retainer pin” installed and everything blasted back on with a 1/2” impact.

@Lugare2011 3 жыл бұрын

@@cap12206 First off this was a demonstration, it wasn't meant to be perfect, just to show you the process on how to do the work. He did bring up torqueing everything per specs for your vehicle at the end. Second, you don't torque castle nuts. The purpose of the cotter pin is to hold the nut and keep it from loosening up. The proper way to tighten a castle nut is to seat the joint with the castle nut until it's snugged firmly but not overly tight. Then look and see where the hole in the stud is in orientation to the slots in the castle nut. If you do not see the hole, loosen(never tighten) the castle nut slowly until you see the hole line up with a slot in the castle nut. The amount you loosen the nut will be very minimal and won't make a difference. Once lined up install the cotter pin. Bend the part sticking through around the nut or over the end of the stud. This prevents the cotter pin from falling out from vibrations. Also cotter pins are safe to reuse at least once but should be replaced after that unless it becomes weak or breaks after bending the pin to remove it.

@cap12206 3 жыл бұрын

@@Lugare2011 I’ve been a licensed airframe & power plant mechanic for over 20 years. EVERYTHING has a torque rating, cotter pins are NEVER reused, I’m fully aware how a castle nut works. And it’s not good practice to assemble front end suspension and steering parts with a half inch impact. This is why I rarely if ever allow an automotive “mechanic” to touch my vehicles. In my industry if I did something so blatantly wrong and caused an accident I’d go to jail. I’m also required to fill out a maintenance log and specify the approved repair method used(by citing a repair manual), hardware used, torque specs used, s/n and cal date of any calibrated tools used, and a sign off by a licensed inspector.

@Lugare2011 3 жыл бұрын

@@cap12206 Blah blah blah I'm a licensed blah blah blah. It's funny how everyone on KZfaq is a licensed or professional whatever lmao. Oh and cotter pins ARE reused.

@super6954 2 жыл бұрын

@@Lugare2011 I work on Ag equipment and deal with the re used mangled up cotter pins on customer jobs that are a bitch to get out sometimes. If a customer or other mechanic are too cheap to replace a few cent up to a dollar for some of the larger cotter pins. I question what else a guys trying to save money on when they worked on something before I had to sort the mess out when it failed again. I've even seen guys use a construction nail bent over, if they didn't have the a new pin when the old one broke the ends off, but hey at least they tried to stop it falling apart doing it .

@IanT_KilleenBonsai 4 жыл бұрын

So I used this kit and want to go with 35's. I don't want my truck all wide like the mall crawlers that never see dirt. I would also like to stay with my stock 20" rims. Any idea of what size tires I could fit under my truck without too much modification?

@daltonandroli146 4 жыл бұрын

What year do you have?

@kattchasers3412 3 жыл бұрын

Depends a lot on offset also.

@andryjcisneros2334 Жыл бұрын

33/12/50/R20

@andryjcisneros2334 Жыл бұрын

305/55/R20 the best choice bud

@nebevorgneerg2241 3 жыл бұрын

Anyone running 33x12.5 on a leveling kit?!

@tannertillman8577 3 жыл бұрын

On newer models (2015+) does this leveling kit ACTUALLY make it level?

@jackpixley3696 3 жыл бұрын

im wondering if I should do a 2 inch or 2.5 I want mine sitting level, not raised up in the front or down I have a 2017

@my-names-justin987 2 жыл бұрын

yea i’m wondering. i just bought this one and now i’m skeptical ab it bc i don’t want it being too much

@coreykolenosky5974 4 жыл бұрын

How will a 35" on 2.5 " kit react off-road if you hit a hole and bottom suspension? RUB?

@kattchasers3412 3 жыл бұрын

rub, depending on how hard you hit destroy a tire maybe a fender or all. I would run a 33 if off roading. leveling isn't for off roading.

@samandjen1 4 жыл бұрын

You say its $30 but when you go to buy its actually $50. WTF

@proudtennessean6152 4 жыл бұрын

So I just added what I’m guessing is the last version of the mammoth 2.5” lift to my truck. The offset triangle looking kit? Is there a difference between that version and this version? In quality or in life? I know I spent $99 on that kit so $30 kinda stings especially since it’s been less than two months since I purchased it.

@kattchasers3412 3 жыл бұрын

No differance just how they upgraded the design to look more factory. My son has the triangles and I have the solid spacer. Does the exact same thing. Oh We both run 35 x 12.5 x 20- rims and tires.

@stevenokrancy1608 11 ай бұрын

Great video, but i think ive been convinced to not try this 😂

@americantrucks 11 ай бұрын

We are here to keep it real and show you what it's about! Glad you enjoyed the video!!

@dilrajshergill9323 3 жыл бұрын

Does this effect the towing and hauling after adding the leveling kit?

@galvanizedcity4981 3 жыл бұрын

Yes the factory rake is for when you have weight in the bed or a heavy tongue weight it will keep the truck level when the rear squats. With the truck leveled with no weight in the bed or hitch then add weight the front rises rear squats

@kattchasers3412 3 жыл бұрын

Buy a set of nice quality air bags for hauling it will save on wear and ride like a dream.