Ah hope you see this! Did you respray your exterior plastic w a similar factory dark gray? If yes, could you provide the paint brand and code/color name if handy? Everyone just tells me “paint em black” but for my cars color I’d prefer the dark gray from factory. I like it.

Awesome to have another viewer from Ohio! Not so awesome about getting rear-ended.... Thanks for watching though, and good luck with your repairs!

That's great that your step pads came of without having to set them on fire like I had to, who thought of that design!? Thanks for watching!

Thank you very much! I'm glad you liked it, thanks for watching and for the Sub!

Glad the video could help! Thanks for watching!

Awesome! Thank you for watching.

Thank you very much, I'm glad you like the videos. Thanks for watching!

I never thought about these not having amber lighting until you mentioned it. I had to go back and see if the OEM ones did. Thanks for watching!

These are the 4 specialty clips - www.amazon.com/Liberty-Rocker-Panel-Bumper-Fascia/dp/B0040CX3HG/ref=sr_1_2?ie=UTF8&qid=1492701474&sr=8-2&keywords=jeep+bumper+clips These are the other clips if you break any - www.amazon.com/Chrysler-Fender-Moulding-Liberty-55157055AA/dp/B00B17E0SE/ref=pd_bxgy_263_img_2?_encoding=UTF8&pd_rd_i=B00B17E0SE&pd_rd_r=0KPZWRFBNTF4JEW3R9RE&pd_rd_w=8kB2D&pd_rd_wg=xqwCI&psc=1&refRID=0KPZWRFBNTF4JEW3R9RE I believe these are the plastic rivets - www.amazon.com/Nylon-Expansion-Rivets-Hole-Length/dp/B0040CZ3TW/ref=pd_sim_263_3?_encoding=UTF8&pd_rd_i=B0040CZ3TW&pd_rd_r=D75B2PS8A88XQQ81WFYH&pd_rd_w=aA7fC&pd_rd_wg=xWpAv&psc=1&refRID=D75B2PS8A88XQQ81WFYH The rear bumper cover came from Ebay, there are a few different ones depending on which version you have. They have the grey textured or the smooth one. I hope this helps you out, thanks for watching and don't forget to subscribe to keep up on all the new videos! Thanks again.

Yep, I believe it's episode 6. If I remember correctly it's mostly screws and bolts on the front with a few plastic rivets, but I'm not sure. It should all be in the video, I have all the Liberty repairs in a playlist called Project Renegade.

The "Christmas tree" style clips just push in. Unless we are talking about different types of clips.

That is a good alternative! I've had others recommend whatever this "shoe goo" stuff is, I've never seen or used it. Thanks for watching!

At around the 2:45 mark of the video I show you how to remove the tail lights. You would just need to remove the lights like I show in the video and inspect the little white plastic squares where the screws thread in. Make sure those aren't stripped out or missing, if they are you can get new ones at most auto parts stores. Or you can find bigger screws and run those in there. The opposite side of the lights kinda snap in as well, so you might check if they are snapped in all the way. I hope this helps you out, thanks for watching!

Rocky X TV i just bought some aftermarket ipcw led tail lights, but i am missing my plastic securing pins for the right side of the passenger tail light. Because of this, they do not snap in, therefore when i screw them in tightly, there is a rather large gap inbetween the light, and the jeep. Do you know where to buy these plastic things? Or do you at least know what they are called? I would even settle for a way to jerry rig the light in there. Thanks for the help!

I got them on Amazon, here's a link. www.amazon.com/gp/product/B00O83HM0Q/ref=od_aui_detailpages00?ie=UTF8&psc=1 Thanks for watching and don't forget to subscribe to keep up on all the new videos!

They were on the Jeep when I got it. I couldn't find another set anywhere, so I reused them. I'm still trying to find were to get new ones, but no luck so far. Thanks for watching!

Aquí hay un enlace a las luces. goo.gl/Pyt2vd y aquí hay un enlace a mi tienda de Amazon donde tengo otras partes de Liberty www.amazon.com/shop/rockyxtv

Y no vendes las puras protecciones de las luces traseras

Oh, las rejillas protectoras, pensé que estabas hablando de las luces traseras. Esos vinieron con el jeep cuando lo compré. Lo siento, no sé dónde comprar esos.

@@RockyXTV gracias amigo

Its has been a while but I believe I got them on Amazon.

Thanks.

I have a set that I can’t use in Australia 😂

In this video?... an old one! It's the stock exhaust in this video and the sound in the opening for these videos is also stock, just worn out. If you check out some of the new videos it sounds much better! It has an MBRP Performance cat-back system and a set of headers on it now. Thanks for watching and if you haven't already make sure to subscribe to keep up on all the new videos and products, thanks again!

Sure here are some links, these are the normal fender flare clips. www.amazon.com/Chrysler-Fender-Moulding-Liberty-55157055AA/dp/B00B17E0SE/ref=sr_1_2?ie=UTF8&qid=1469369166&sr=8-2&keywords=jeep+fender+clips and these are the four other style that I had to get. www.amazon.com/Liberty-Rocker-Panel-Bumper-Fascia/dp/B0040CX3HG/ref=pd_sim_263_2?ie=UTF8&dpID=41WwWgeXa%2BL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&psc=1&refRID=N8AENC3C64DPQA0GGXBK I hope this helps, don't forget to subscribe to keep up on all the new videos! Only if you want to that is, thanks for watching!

Thanks and wish me luck, Thank you very much with your video i got the confidence that i can do it, although the step pads will be a tough one to deal with since i dont have a torch..

John Jahsen Panes Yeah... those were a pain!

Are these the ones you are looking for? www.amazon.com/Liberty-Rocker-Panel-Bumper-Fascia/dp/B0040CX3HG/ref=sr_1_2?ie=UTF8&qid=1506531329&sr=8-2&keywords=jeep+bumper+clips

Yup those are it thank you so much

Rocky X TV also could I use and push rivets for the wheel well molding

I don't think it would hold, there are 2 or 3 spots that use the "Christmas tree" style push clips. I used plastic rivets that I got at harbor freight, they came with the rivet gun and everything for like 15$

Rocky X TV ok what size rivets do you think

There are so many and it was so long ago that I honestly don't remember what I used. I do have a list of some tools, parts, equipment, supplies and other stuff I use, there's a link in the description. Thanks for watching!

Rocky X TV do you remember where you got your wheel opening flares from m

The flares come factory like that on the Renegade and Rocky Mountain edition Liberty's.

Rocky X TV oh I thought you replaced them do u know a cheap place to get replacement flares also what’s the tool you used for securing the clips on the bumper an flares

Other than salvage yards I'm not sure where you could get the flares at a good price. The tool was a plastic rivet gun from Harbor freight.

Yeah, I have a big tub of Dielectric Grease but always forget to use it when filming LOL. I usually go back afterwards and do it, I forget Anti-Seize and LockTite most of the time during videos as well. Thanks for watching!