Jeep Liberty: Lower Ball joint

Рет қаралды 241,517

3 жыл бұрын

In this video I show you the process I use to replace the front lower ball joints in a Jeep Liberty. It's a pretty straight forward process if you have the proper tools. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 792

@JudyDesrosiers-xq8op 14 күн бұрын

Best video in simply put instructions for the installation of a new ball joint for jeep liberty I've found

@hatfez 3 жыл бұрын

"When can you fix it?" "Let's see, today's Tuesday, I'll have it done Friday." "But it's a 10 minute job?" "I don't have 10 minutes today, I'll have 10 minutes on Friday!"

@markh.6687 3 жыл бұрын

Every time my dad said "I need your help; it's a 2, 5, 10-minute job", I tripled the estimate.

@ckm-mkc 3 жыл бұрын

@@markh.6687 Tripled, that's generous. If a customer says it's 5min, it's probably two hours book rate, 3 hours real time....

@roberttaylor5764 3 жыл бұрын

ck m M

@notajp 3 жыл бұрын

If you wanted it back tomorrow, you should have brought it in yesterday.

@bigboy999555444 3 жыл бұрын

Glad I'm not the only one that uses cutting wheels like that

@charlesmiller5078 3 жыл бұрын

Money does talk, while driving a F-600 concrete pump rig I blew a engine at around 3am, had it towed to a Really small dealership in Monticello Fl. The owner told me it would take at least 2 weeks to put another engine into it, said plenty of farm trucks ahead of me and that was his bread an butter. I totally understood, but my boss didnt. He told me to hand the phone to the owner, the job was done in 2 days. I asked him how he got them to repair so quick, he said well to start with I offered him 3 times the estimate, plus we overnight him a brand new engine. Plus the owner gave me a huge watermelon to take home with me. It was maybe the best watermelon I ever tasted ( 1971 ). Money dosent Talk, it Screams.

@Ivo-- 3 жыл бұрын

I don't even watch these for the automotive content anymore, I just enjoy the banter.

@SuperEoin09 3 жыл бұрын

Yeah, same here. Is it me, or is almost every word Eric says the name of a Pub/Bar?

@scottyakoubian9238 3 жыл бұрын

OMG!!! Trinity has grown so big!!!!! Dude- enjoy this time w your family. They grow up too fast.

@trybriguy1357 3 жыл бұрын

You know, people used to say that to me and I was like yea, I know. But you know what, times does go by so fast, and then you're left alone, they grow up, move out and your left with just pictures, videos, and the memories. So sad in a way, you so look forward to it and then, their gone, hold on Eric, and enjoy these wonderful days when she walks up and talks to you , you'll miss it one day!!!

@jazko 3 жыл бұрын

Exactly what I was thinking, she is adorable !

@LAactor 3 жыл бұрын

Forgot that was her name, although I heard him say it a few times. Just watched the one where he says he's named after Erik in CHiPs and one wonders, was she named after Trinity in the Matrix..

@SkiiMaskWay223 Жыл бұрын

😂 the safety police . I love this guy

@spelunkerd 3 жыл бұрын

Great to see another ball joint, another SMA video. Would be even better to see that dead Suburban, ha ha. Always nice to see emergencies, solved by a pro on the run.

@JeremiahCardin 3 жыл бұрын

Wish Eric had a aftermarket rant channel I would watch him rant

@calm4477 2 жыл бұрын

Ah, you made that look easy, I thought it was going to give you more problems than it did. Correct tools make life easy, DIY would've been a different story 😲

@chicagophoneguy 3 жыл бұрын

Early in the morning, wife and kids still sleeping, cup of coffee, and a new SMA video. Gonna be a good day...

@meabob 3 жыл бұрын

We did so many of these lower ball joints back when the recall was new we could do both front lowers in 20 to 25 minutes. My personal record was 18 minutes but everything went perfectly smooth which is unusual for a Jeep or a Chrysler in general.

@inspectorjavert5563 2 жыл бұрын

why was there a recall for the lower ball joints?

@eds3079 2 жыл бұрын

@@inspectorjavert5563 When its not serviceable, it has NO option but to fail sooner than a greasable part. Too many failed sooner than expected.

@williamcantalamessa5231 3 жыл бұрын

I always put ball joints in freezer for couple hours so they slip right in . Same with bearing races and bearings

@stevenreynolds2327 3 жыл бұрын

we keep our cylinder sleeves for commercial refrigeration compressors in a freezer

@jimparker7778 3 жыл бұрын

I used to know a guy who kept parts like that in his wife's panties drawer. Got 'em nice and cold.

@WhalerGA 3 жыл бұрын

I have to admit, I winced for just a second when I first started reading this.

@jimparker7778 3 жыл бұрын

@@WhalerGA In the first 30 seconds of the video Eric O. says "swollen nuts" twice without even taking a breath

@dtnel 3 жыл бұрын

Down in Australia I saw on TV that they actually take the bearing races and use liquid nitrogen in a tool built for that and then use a torch on the hubs. This is for the huge as mining equipment of course. That's how they get it done with no presses and they use a torch for removing the old races, sleeves, etc....

@g.fortin3228 3 жыл бұрын

It'l work as long as it works, until it doesn't ! YES ! Nice Job man.

@TerryDanley 3 жыл бұрын

Wow, those winters are brutal on vehicles!😩

@rbarger71 3 жыл бұрын

Always brightens up one's day when someone is willing to throw down some extra Benjamins to maybe expedite the fix.

@bobweaver4099 3 жыл бұрын

I moved to California from Ohio in 1970.. I had a 55 Chevy and could not believe how easy everything came apart.. no Rust... I loved it in Cal..

@jeffkalte2929 3 жыл бұрын

"we are not sending this into space" Legend!

@stevenreynolds2327 3 жыл бұрын

and if they were, I sure as hell wouldn't be in it.

@WhalerGA 3 жыл бұрын

My late father was adamant about using a torque wrench for a lot of things (but not everything). He spent most of his career in quality control for a NASA and military contractor so it makes perfect sense in light of his perspective.

@sesse6411 2 ай бұрын

Awesome work man thanks for showing it to us! It truly helped me very much

@doctorjohn-burgtekie 3 жыл бұрын

Glad the Moog ball joint not a sponsor comes with extra nuts, my wife took mine several years ago.

@keepingitcleanwithmrlee6696 3 жыл бұрын

Bought my 04 liberty for $500. Still running strong 💪

@throttlebottle5906 3 жыл бұрын

so about scrap price? maybe you got lucky and some sucker kept it in good shape mechanically ;)

@keepingitcleanwithmrlee6696 3 жыл бұрын

@@throttlebottle5906 it had absolutely no oil when I went to pick it up. But I got if right after about $250. Valve cover gaskets are a must on the 04 liberty with 3.7..

@elcheapo5302 3 жыл бұрын

You can tell Eric is a pro because he only drops the grease fitting once. I'd still be there fussing with it.

@shaneboggs2811 2 жыл бұрын

I really enjoyed watching this, I'm doing my wife's Liberty tomorrow morning.. Thank you so much!

@HouseCallAutoRepair 3 жыл бұрын

@ 0:15 "Now you can see there's a problem with our nuts... Some are swollen..." @ 8:10 None of us are going to complain when you "do whatcha gotta do" to get something occomplshed. I've used cut-off wheels to "polish" all sorts of stuff... @15:50 "... Pretty easy..." Yeah.... On a lift! Nice vid Eric!

@walterk1221 3 жыл бұрын

Eric, you forgot to show us the nifty OTC kit that keeps you from having to pick receiver cups, etc off the floor. Just kidding, I realize that with a backlog of appointment customers sometimes things just don't make it to video.

@throttletherapy9998 3 жыл бұрын

Going nuts trying to find out the OTC kit number, the snap on kit is like $800, I have the older OTC kit and it still works great but I would love a kit that the adapters stay in place

@philw8704 3 жыл бұрын

Walter K ; maybe Eric used the two minutes to take care of the drop-off in the parking lot before the Benjamins were blown away in the wind :-)

@fuckjewtube69 3 жыл бұрын

@@throttletherapy9998 The Snap On kit is worth it though. I have it and that thing will survive a direct nuclear blast.

@fomoco300k 3 жыл бұрын

Keith Morris, BJPXR9. Jim the car Guy has a “review” of it on you tube. It’s actually just an unboxing, but the video title says review.

@Wildturkey10121 3 жыл бұрын

Glad you are so busy, but I sure miss your videos they are a highlight of my day!

@thomasfischer6230 2 жыл бұрын

This technique worked great for me. Way better than the book saying to take the knuckle off. Thank you sir.

@TheSkipinatorVids 3 жыл бұрын

"That's just me being a wuss. I didn't even need my safety glasses." 30 seconds later... "Ow! Right in the eye!"

@troycarothers8254 3 жыл бұрын

3:58 Mowing the lawn, followed by the air compressor, the noon-time fire dept horn, Vinny, beep beep hey it's that guy, etc, etc. The sounds of SMA.

@throttlebottle5906 3 жыл бұрын

to clean the flat of knuckle/bore a few cup wire wheels with diameter close and oversize works well. put in small drill/right angle cordless, whichever fits best.

@nwalker8866 3 жыл бұрын

AKA the “rust never sleeps” channel!!

@bubbabentley3537 3 жыл бұрын

Thank you for helping me with my lbj job!!!

@2009jktj 3 жыл бұрын

Back in my dealership days, there was a recall for 02-06 Liberty lower ball joints. Water could get into the ball joint and cause it to fail. So a new ball joint that had a bead of silicone around the top was installed. Book time was 1.1 hours for a 4x4 and 1 hour for a 4x2. After a little practice, both sides could be done in 15 minutes.

@TheDude666dude666 3 жыл бұрын

Oh man was feelin bummed being in lockdown in Melbourne Australia, and within 2 minutes of watching you Eric I'm smiling thanks mate! And the neighbor with the mower hahahaha always

@crisprtalk6963 3 жыл бұрын

G'day mate!

@TheDude666dude666 3 жыл бұрын

@@crisprtalk6963 G'day mate right back bud! 😊

@InsideOfMyOwnMind 3 жыл бұрын

@@TheDude666dude666 That made my day. Some would get all bent like "everybody does tbat to me" but Aussie just takes it and gives it right back it's all good. Stay safe down there.

@leonardodavinci303 3 жыл бұрын

You have my sympathy in Melbourne Ozzieland!! Seems as tho you need to persuade some of your politicians to do a LONG walkabout....with surgically attached mask. Check out Dan Bongino podcast.

@TheDude666dude666 3 жыл бұрын

@@InsideOfMyOwnMind cheers mate 😉

@thejeepdoctor 2 жыл бұрын

I’m a retired Jeep tech. Next time you try to remove lower joint, just use you air chisel with round blunt tip about the size of your little finger. I just flip the stud over to one side and hammer on it. I never used a joint press. I still have the cup I used to press it back in with. Used short blunt tip to buzz it back in with. Jeep had a recall on these. I could do them in my sleep. 😁

@metoon3092 3 жыл бұрын

The neighbors Lawn Mower must receive a Bluetooth signal from your camera. Camera On - Mower On!

@theuppercut 3 жыл бұрын

Every blessed man has a blessed woman by their side. Mrs O is mad clutch for always making you lunch Mr. O. I need me a Mrs O :(, I remember once you were at the shop by yourself and you had to go to the gas station for a burrito special lol. Made me way happier when you showed us a video of her handing you a plate with a beautiful sandwich on it.. If that ain’t Love.. I don’t want it!

@rhonda1950 2 жыл бұрын

This guys is so great! Thanx you most of all for being a REAL person. God bless you and your's brother.

@IronMan-ml5yi 3 жыл бұрын

I love your un contemporary ways

@mattlonproctor7221 Жыл бұрын

Man why did you have to live so far! LOL I have the same Jeep same problem and I am not a mechanic I'm good at following directions but this is just too much for me. It is a great tutorial man I appreciate you and like I said I wish you lived in Connecticut! Take care keep doing your videos.

@llservice3376 3 жыл бұрын

You would be a great automotive vo tech teacher, I'm 74 and I still remember my auto class (thats when they had that class in High School) Of course you would probably go broke. But after all these years I still remember Mr Stellatella my teacher. Learn a lot from that man

@Sicktrickintuner 3 жыл бұрын

And Jeep must be watching? Had 2 jeep adverts while watching the video

@JohnIsett 3 жыл бұрын

I am so glad you dissed the "double clickers" whose insecurities and distrust of their own skills insist on not going with the first click. Well done, Eric, and it's why we love you!

@1013redoak 3 жыл бұрын

Thanks, hor another great video! I always enjoy seeing Mrs. O and her little mini-me as well! Your daughter is just precious!

@BMan100 3 жыл бұрын

" Bruh, You can't use a cut off wheel for a cleany uppy tool!".....my face is hurting from laughing so hard, it's just the way he said it.. that got me good..

@SouthMainAuto 3 жыл бұрын

😁

@charlesstull4582 3 жыл бұрын

U are by far the the best how to instructor person there is. Keep up the good work

@RichIsArrogant 3 жыл бұрын

I have done so many 04 jeep liberty ball joints. 2 of them after they failed while I was driving them. You're doing the mechanical lords work.

@ImAlwaysRightjustaskgoogle 8 ай бұрын

thanks bud, im doing this job middle of next week!!!! your info was amazing!

@cavemanstyle1376 3 жыл бұрын

Eric I appreciate you working on that crusty old garbage so I don't have to .

@tedmortensen5619 2 жыл бұрын

This guy is fantastic, just what I was looking for in my search.

@brianunangst4447 3 жыл бұрын

Anytime I see a balljoint video, I think of ETCG and his welder. Why no welder? Is it even in, if you haven’t welded it?

@miker1681 3 жыл бұрын

Oddly enough i found myself entertained but most importantly you gave good mechanical advice thanks for both

@hellcat1962 3 жыл бұрын

16 year old Jeep still on the road. Scotty would have a fit.

@tom535 3 жыл бұрын

LOL,, BUT True..

@five0pd310 3 жыл бұрын

Endless money pit. Rust doesn't grow on a Toyota! haha

@markh.6687 3 жыл бұрын

Scotty would be amazed it still runs, let alone is driveable. Rev up your scan tools!

@neilmurphy845 3 жыл бұрын

@@markh.6687 You forgot about the 5000 doller scan tool

@Tony_W45241 3 жыл бұрын

What click bait video title would Scotty come up with to talk about that?

@Shockedbywater 3 жыл бұрын

Not only do you have a real partner in life with Mrs O, she is beautiful too. Life is good.

@enriqueflores1461 3 жыл бұрын

Nice dress BTW! Luckey man Mr O!!!!

@markh.6687 3 жыл бұрын

She is "very easy on the eyes", as an old saying goes.

@steved7610 3 жыл бұрын

...and the look in her eyes when she looks at Eric.

@frankallenjr7251 3 жыл бұрын

Glad to see Im not the only one that has the air tool going in the wrong direction when doing a job.

@R_Wilkins_Sr 2 жыл бұрын

Good video brother! Doing my 07 same...lower ball joints

@TimMcArdle 3 жыл бұрын

Just got my new SMA shirt the other day! Thanks 👍

@Julian-rh5ge Ай бұрын

Excellent job, well instructed

@flaburgastedbunny 3 жыл бұрын

I have the same 06 liberty since I first learned to drive. I'm still riding in it for almost 7 years and it has almost 250k with virtually little maintenance. I'm really proud of this vehicle and I just now finally need new ball joints. Absolutely fantastic timing. I know jeeps get hate, but if you take care of it and you happen to live in the midwest or a rust belt state, this car can take a serious beating and I highly recommend it to all especially college commuters! They are cheap and most repairs are very easy. Thanks for the excellent tutorials as usual Eric and I hope everyone has a great week.

@davecaselli1957 3 жыл бұрын

Have an '02 Liberty (almost 180k miles now) Got it used at the end of '02 when the '03s came out. In its early life there was a recall I think twice to replace the lower ball joints. Recently I had the driver side replaced. It has that Moog with a grease fitting now. Most trouble i had has been with the radiator (replaced twice) and its cooling fan relay system. I recently opened up a passage to the engine compartment to wire in an override switch to run the fan on command. Paused for other work, and the garage is blocked with my table saw, but eventually I plan to get back to it. Now that I think about it, I replaced the upper control arm on the passenger side last year. It was supposed to have a grease fitting, but doesn't. Maybe some slick vendor from Rockauto swapped mine for the cheaper model ? Box label was correct.

@HebrewTHEO 2 жыл бұрын

Did you keep make a creaking noise when turnin the wheel ? Is that why you replace the ball joints ?

@flaburgastedbunny 2 жыл бұрын

@@HebrewTHEO it depends, best thing to do is to jack it up by the control arm so the weight is loaded on the vehicle and take a pry bar and put it under the wheel. Take your other hand and put it on the top of the tire, at the same time pry up on the tire with one hand and push in on the top of the tire with the other. If your ball joints are bad you will feel a pop when using this technique, it's good to have a buddy verify under the car to see what components of your front end actually have play. Another good test is wheel travel distance. When turning the wheel at low speeds, if you feel that it requires more force to move the wheel from one direction to the other it's most likely and indication that you have a ball joint that is binding.

@mikeafa1 3 жыл бұрын

Hey Eric, why the short videos? Missed the long ones and the typical day in the shop videos. Never a dull moment over there. Mike from Long Island, NY.

@SmittySmithsonite 3 жыл бұрын

KZfaq notifications down on my end! GRRR! 😡 That's a handy socket for the lugs. I always fumble with 3 sockets - one to pound on the swollen chrome, another for the good lugs, and yet another smaller one for the ones missing the chrome top! GM is famous for this problem, too, from the 80's all the way into the mid '00's. Gotta love it ... 😬 I noticed the new fancy BJ press! It actually holds all the spacers? Sweet! 👍🍻

@tomoakhill8825 3 жыл бұрын

Oh goody. Another video with wrenches. I love these! I could watch them all day long.

@unclebs4732 3 жыл бұрын

In 2003, and I worked at a D-C-J dealer and I change a few lower bj's on 2002 Liberty's, it was a recall. We got .9 to change both lowers and install heat shields, my best time was .8.

@ericvardin5304 3 жыл бұрын

It's unreal how much care you put in to cleaning up old surfaces and removing rust - it would be interesting to see how half assed this same job would be done at a lot of other shops.

@ImLivin6 3 жыл бұрын

Everything will work ... as long as it works! A positive approach is half of the battle.

@michaelgayford2439 Жыл бұрын

I like that you ask for criticism! I have none!

@qweef69 3 жыл бұрын

Jeep had a recall on these.lucky you

@andrewps84 3 ай бұрын

I’m doing my lower ball joint (other side was already done last summer); I don’t have the benefit of a lift so I had to remove the knuckle to do the rest off the car. I also found out that my upper ball joint is toast so another project. Thanks for sharing.

@johnstarkey5366 3 жыл бұрын

I liked the cutoff wheel trick to clean up the ball joint mounting location.

@chrystalwoosley5444 3 жыл бұрын

Thanks for sharing. Easier than pulling the whole thing apart..

@markchidester6239 3 жыл бұрын

Wow the kids are growing! Nice content, feel like we are watching them grow up! Mrs. O is looking lovely in her sun dress. Now that the important stuff is out of the way, I was screening "put the nut on the stud upside down then press it out!" Great video to have morning coffee with on a Saturday!

@davidfederau5958 3 жыл бұрын

I have a brother?!!

@MiamiZombie2012 3 жыл бұрын

Another great video to go with my coffee. I too just finished doing ball joints on my truck and took it in for an alignment. I did get the adjustments loose and bought the feller some donuts.

@samzauto 3 жыл бұрын

Very nicely done.

@xelaju8 2 жыл бұрын

Dont have a Jeep but it was interesting. Thanks for sharing.

@markcaldwell1245 3 жыл бұрын

Just an idea when trying to remove the ball joint. To line up the bolt and keep it from moving off the C clamp take a socket the can fit over the end of the clamps head and use either a 3/8 or 1/2 drive to keep the bolt centered and from sliding off. To give credit you are the one that made me start thinking that way. Another great job.

@johng1077 3 жыл бұрын

I thought you were doing a smoke show while taking off that first nut still trying to deal with my swollen nuts...glad to see safety glasses on now just a mask so all those particulates stay out of your lungs... You have all the cool tools Eric O!!

@onestepatatime2346 3 жыл бұрын

Learning lots from you sir. You da man

@rayjos0424 3 жыл бұрын

At 11:59, thought Mrs. O asked "any news on the bourbon", my kind of woman!😁😅😁

@crisprtalk6963 3 жыл бұрын

yeah its got 4 more years in the barrel!

@Mike_Engel 3 жыл бұрын

Really missed your wit and comments Eric.... Can't wait for the next video

@SouthMainAuto 3 жыл бұрын

More to come!

@danielsmith1892 2 жыл бұрын

when I worked at Jeep and we had to replace these under the recall, we got it down to about 20 minutes. I always used air hammer with small tip to get the old ball joint out rather then the ball joint remover, so much easier and faster.

@mem3656 3 жыл бұрын

was not aware you could repair mopar vehicles. huh learned something new..

@markh.6687 3 жыл бұрын

Just because you CAN do somthing, doesn't mean you SHOULD. :)

@donerickson1954 3 жыл бұрын

See now this is why I watch Eric's videos. I get to learn so many new ways to improperly use tools to get the job done.

@The58stupot 3 жыл бұрын

It looks easy when ya got all the right tools. Aint that the truth Eric. Greetings from England 🇺🇸🇬🇧

@salvadorgutierrezr5914 3 жыл бұрын

Great video , and thanks for teaching us🙏🙏🙏🙏🙏👍👍👍👍👍👍👍👍👍👍👍👍👍👍👌👋✌

@jackgreen412 3 жыл бұрын

Good video as usual.

@thomasshaffer8547 3 жыл бұрын

obviously some new tie-rod ends that I missed somewhere. I was worried about the wiz wheel for you!!! but great stuff as always.

@mikechiodetti4482 3 жыл бұрын

Good job. Hello to Mrs. O in summer uniform. Must be hot there. 103 yesterday here in Palmdale Ca, posed to be 107 to 108 today.

@michaelparker9886 3 жыл бұрын

I love the astro light you use bought one for myself best drop light ever

@kastooMcFry 3 жыл бұрын

Your daughter has gotten so big! She's adorable. Also like the cutoff wheel trick. Thanks, Eric.

@baxrok2. 3 жыл бұрын

Easy peasy for SMA. Thanks Dr. O!

@Yawwee 3 жыл бұрын

That was a nice straight forward job without any head aches !!!! Well done. Mrs. O. looks pretty today in her fashionable dress. She is flashing that big beautiful smile at you Eric !!! Looks to be in a good mood. Your daughter is cute with all them curly lengths of hair !!! Yes, with the right tools, it makes the job go so much smoother and faster !!!! Maximizes profits too !!!! : - )

@Uticagreens 3 жыл бұрын

You have got to have the brother of one of my neighbors who mow his lawn EVERY FLIPPEN DAY!

@fartnocker86 3 жыл бұрын

That has to be one of the easiest ball joints I've ever seen you do ( and I've seen a few) great video. Glad to see you putting stuff out again Eric

@meabob 3 жыл бұрын

Those are super easy ones even with 16 years of northern curd caked on them.

@j.o.a.t9718 3 жыл бұрын

i hate it too when i get all set up to use the impact on ball joint removal, only to have it in reverse. DOAH!

@lawrenceengel3330 3 жыл бұрын

Good solid quality real world fixes, that is why I love SMA 👍

@craigsmith8217 3 жыл бұрын

The extra nuts in the ball joint kit are part of the break plan. The gal packing the parts in the box puts in extra nuts so that she will run out sooner, causing the supervisor to pull out his hair and giving the gal some break time while he goes in search of more nuts and berates the supply guy for miscounting.

@gregdodd8894 4 ай бұрын

lock ring on top of ball joint but i like your get her done attitude

@matthewmattix 3 жыл бұрын

Good job on the lower ball joint replacement

@chickmagpunk 3 жыл бұрын

Thanks for the vid Mr.O! Hope you and fam staying safe.

@vadenkwin 3 жыл бұрын

I just replaced the lower ball joints and control arms on the wifes 2010 Charger RT. Had them all done at a shop 18 months ago only to find out they didn't change the lower ball joints which were about to disintegrate, didn't install the zerks and didn't lube anything. It was 113 in the garage that day and I pulled and pressed rusty ball joints with the Harbor Freight Earthquake XT 3/8" 20v and it moved those ball joints like a pro! Im glad your doing it and not me today!