I suppose it’s sharing how things really are in reality if there wasn’t a camera around.

Ab Normal at least you got it done pal🎉🥳... did you replace the DMF as well

Yes i did. Didn't want to do "incomplete" job. 🤓

@@WMCS might as well replace the cv axle boots or whole axle, struts, bearing, and rotors at the same time too

Just started doing this today ugggggg --

jamie211983 thanks for the feedback. More vids to come.

Hope the video comes in handy.

@@WMCS I already know it will! The engine is simple, the wiring harness unplugs and can come out with the engine and then be transferred with all the accessories. There's lots off room in the engine bay, I'm gonna drop the engine out the bottom.

@@magradrift6271what no video ?

Thanks for the thumbs up., really appreciate the support

Thanks for the kind gesture. It’s been well received and very much appreciated. 🍻

@@WMCS Cheers man! 🍻

Val Tson thanks for the feedback

Simon We you’re welcome. Glad you found it helpful..thanks.

Hiya. Have a look on the channel. I’m sure there’s a V70 repair. Let me know your thoughts.

Hi Daniel. It’s exactly the same.

@@WMCS Perfect! Thank you! 👍

Kalid Sahal thank you for the review... and for visiting the channel

I’m not sure. Depends on how the driver rides it. I only replace them. 😁

Erik Olsson i did do a video but took it down... it’s a bit risky to be displaying tools in a van 😊

Erik Olsson there one gearbox upper mount and one gearbox lower mount as shown in the vid ... then there is one engine mount in the engine side.

semen drinker 247 I always use the marking on the body where the subframe attaches.... be sure to undo the steering column attachment that links into the steering rack. From the footwell by means of a 10mm bolt. ... take caution that the steering wheel is locked. If the steering wheel spins freely you’ll have a problem with the angle sensor. ... once the column is detached you should be safe to lower one side of the subframe without tugging on the steering side. That rack itself can stay in situ.

@@WMCS thanks, great stuff!

@@WMCS Is this part (disconnecting the steering column from the subframe) featured in the video? Thanks!

Bah à part le centreur... J'ai fais la même sur ma Focus même moteur même boîte même châssis...la loose la dépose du berceau...

S60 a lot easier.. watch this weeks upload there’s one on there.

Yes almost exactly the same. Apart from the gear linkage attachments

Maybe it’s rubbing against something. Check the brake shield also.

jaewoo kevin Yes they share the same gearbox.

.

I like them all..,, but a bit restricted working outside ...

lg lg definitely the same box... how did you get on..? Was it on a ramp you got yours done ...

@@WMCS Sorry, I would to ask if it is same job for mine V70F

lg lg oh sorry mate😁.... yes it’s the same gearbox. But slightly different attachment on the gear linkage.

@@WMCS but I think I have some frame below which I have to take down. I wonder if the motor stay on this frame and how to do to keep it on place?

lg lg I’ve gone back and check with regards to the V70.. there are two different models. What year is yours. The earlier model. The whole engine and gearbox is resting in the subframe. And that will require some major surgery. If it’s the later one then it should resemble this one. Maybe you’ll have to slightly drop one side of the subframe. But let me know the year of your car.

Pálinkás Zoltán 10000km.

@@WMCS you mean 100k not 10k?that's like 7000 miles or 1.5 oil changes

🍻🍻well done ✅

@@WMCS 😊 1st clutch for me...certainly the last To hard...but since 2 Years it work perfectly. This engine is very good ans solid Only change thermostat was stay open. Sorry for my english im french

Vaux_Wolf All volvos uses ford gearbox. Some of them uses the whole ford engines and gearbox.

Its normal because its the P1 platform ...

I was gonna say yes..,, 😁🍻

Jordan Walker not quite.