No video

2007-2017 Ford 6F50 6 Speed Transmission Drivers Side Axle Seal Replacement **PLUS SOME GREAT NEWS**

  Рет қаралды 158,366

FordTechMakuloco

FordTechMakuloco

Күн бұрын

Come along as we take care of a leaking axle seal on a 2011 Ford Explorer. This general procedure applies to any vehicle with the 6F50 6F55 transmission including the Ford Explorer Flex, Edge, Taurus, MKT, MKS, and MKX.
These are the Parts and Tools needed-
Revised Seal (All Years)-
amzn.to/2iwX0Mc
Rust Penetrant-
amzn.to/2jjfuAV
Seal Puller-
amzn.to/2iTZstX
Medium Strength Loctite-
amzn.to/2iUaWNT
Caliper Hanger-
amzn.to/2jkwPcb
Mercon V (model year dependent)-
amzn.to/2jjabBB
Mercon LV (model year dependent)-
amzn.to/2ix2jLk
My Company BSG Automotive offers Auto Repair services in the greater Chicagoland area.
Website:
www.bsgautomoti...
Facebook:
/ bsgautomotive
Catch up with us on-
Facebook: / fordtechmakuloco
Twitter: / fordtechmak
Instagram: / fordtechmakuloco
My company KZfaq Channel- BSG Automotive providing repair advice on makes and models other than Ford: / bsgautomotive1
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and BSG Automotive (hereinafter “FordTechMakuloco”) makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. FordTechMakuloco shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by FordTechMakuloco and therefore, FordTechMakuloco does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge FordTechMakuloco or anyone affiliated with FordTechMakuloco, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

Пікірлер: 250
@harryjquackenbush2926
@harryjquackenbush2926 7 жыл бұрын
Brian, Not only have your videos kept my two Fords running, you also kept me entertained through a six month deployment. I think you help more people and in more ways than you realize.
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Thanks I know how boring it can be during downtime when deployed!
@johnb1121
@johnb1121 3 жыл бұрын
@@FordTechMakuloco what is the tool you used to drive the seal in please😍😍😍😍😍😍😍
@1luxuryliner440
@1luxuryliner440 3 жыл бұрын
Thank you for your service and protecting us
@kentsparrow8479
@kentsparrow8479 Жыл бұрын
that was one of the best tech videos ive ever seen ! you addressed all the difficult areas and i always wondered how to punch the axle back into the transmission. plunging it is excellent. was never sure if that would harm the joint or not but now i know. outstanding video and camera work too
@Raider5087
@Raider5087 Жыл бұрын
My wife's SUV was leaking transmission fluid, 1/2 quart per day. I saved myself a ton of money by watching this video and I did the job myself. It only took two hours working at a slow pace while being careful. Thanks for the video! You da man!
@virtouslist7980
@virtouslist7980 4 жыл бұрын
Just did this last night, awesome video man. Thanks!!! I used a short piece of 2x4 to pound my seal in and it worked great, and purchased the seal puller on amazon which also worked great. I drained the Trans fluid first through the drain plug, which usually ends up being around 5.5 quarts and nothing came out of the seal doing it that way. On a 2014 Limited the strut bolts were splined on the left side but just on the left side of the strut itself not in the spindle. With the seal and puller it was around $30, not including trans fluid. Took a couple hours, well worth doing.
@jr7441
@jr7441 7 жыл бұрын
Congratulations on the new home and shop. You deserve it bro. Your tour across America helping Ford owners that were in need says it all. Keep up the great work.
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Thanks!
@shawnlowder9810
@shawnlowder9810 5 жыл бұрын
Best video of of this job I have ever seen! And I have watched many. Your video gave me the confidence to fix my daughter's 2012 fusion. Many Thanks!
@andypfost
@andypfost 2 жыл бұрын
I’m seriously impressed with your explanation of this job. Ford wants 2300 for my 2015 explorer. No reason I can’t do this with your video!
@jhutchisonak
@jhutchisonak 6 жыл бұрын
Very thorough, best video on axle seal replacement. Usually I have to watch multiple videos to answer questions, after watching tutorials that lack instructions. You have left me with no questions, or the need to do further research on the subject. Thank you for taking pride in your work, and willing to share your knowledge. Awesome!!
@johnross6180
@johnross6180 9 ай бұрын
Thanks. Clear straight forward and methodical. Brian , you are a pro. I have learned so much from you.
@robertdavis6708
@robertdavis6708 7 жыл бұрын
Glad your doing fine Brian. Your and other repair videos on YT help myself tremendously. Keep them coming. coldbear.
@danjordan5827
@danjordan5827 7 жыл бұрын
Thank you for all your help. 2011f150ecoboost engine rattle @startup ,has been repaired,under warranty. your video saved my a**.
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
God to hear!
@GeezerGold
@GeezerGold 7 ай бұрын
Good video. I would recommend filling the transmission with fluid once you seat the axle into the transmission housing before reassembling it all to make sure there are no leaks, because you don't want to find out that the seal is still leaking after everything has been put back!
@rrmech11
@rrmech11 7 жыл бұрын
Brian congratulations on your new home. You deserve it. And yes a LIFT. SWEET
@captainkirkchevnomo
@captainkirkchevnomo Жыл бұрын
Excellent in every way. Thanks. I hope you and your family are safe and healthy six years later.
@denniswilkinson1118
@denniswilkinson1118 7 жыл бұрын
Great video Brian. Can't wait to see the new shop being built.
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Me too!
@brickpavingartificialturf247
@brickpavingartificialturf247 7 жыл бұрын
I'ma tell ya... You helped me get my truck on the road again when I was hit by this crazy economy... My F250 2006 4x4, 5.4 engine is running pretty good... From the solenoids, differential oil, to the stuck spark plugs (7 of them), serpentine belt, and cleaning out a/c unit with just blowing it while on the car from the engine wall, to knowing that I will need to change my phazers real soon. You are a champ! The best that I have seen explain it to the exact. I changed my rear wheels seals, too. Some day I can thank you better when I get back on my feet. A gift or something...
@sanity1977
@sanity1977 7 жыл бұрын
Congratulations on your upcoming move. Looking forward to seeing more repair videos on your new shop. Keep up the great work. You rock !
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Thanks it is definitely an exciting time!
@tremblingone4269
@tremblingone4269 7 жыл бұрын
I don't currently own a Ford but your video is very informative. I think I could do that myself now.
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Thanks!!
@CubasAutomotive
@CubasAutomotive 7 жыл бұрын
Congratulations on purchasing a new home, and the ability of building your own shop to your own liking! I hope to be doing similar one day! Of course, another great instructional video 😄
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Yeah I really feel lucky to be able to do it so quickly like this.
@webkinzlovers5351
@webkinzlovers5351 4 ай бұрын
Note to all: 2014 Ford Flex---those 2 strut bolts are pressed on and splined into knuckle. After nuts are removed, bolts are tough to get out without air hammer. I had to apply some heat to the bolt head and beat on opposite end with a 10 pound hammer (with nut on to prevent damage to threads). It took a while but finally broke free.
@arongrossman6494
@arongrossman6494 7 жыл бұрын
Love how your videos are so thorough and detailed. Would the passenger side on an AWD Taurus leaking from the seal with the ptu be much more complicated, or is it about the same procedure?
@brianskinner4328
@brianskinner4328 7 жыл бұрын
Awesome video Brian. I take it that you moved outside of Chicago and bought a plot of land for your shop and house. I just find it awesome how your businesses are going
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
We are only moving about 2 miles away we are already outside the city now but much more space.
@user-od1bs4yi6m
@user-od1bs4yi6m 4 ай бұрын
It amazes me that more people wouldn't wont to see this
@ryanmac7377
@ryanmac7377 7 жыл бұрын
oh man a dedicated shop with a lift, how awesome is that! congrats
@leegray6165
@leegray6165 Жыл бұрын
Great video. Will help me immensely on an up coming axle replacement job on the wife’s 16’ MKX. Thank you God bless.
@MichaelJames-je6cr
@MichaelJames-je6cr 7 жыл бұрын
On some of the Ford Escapes you also have to replace the half shaft due to mfg burrs that tear up the seal. I know from experience after having 3 seals put in.
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
+Michael James yup I have videos on that too for the 6F35 in the Escape and Fusion
@johnjones4096
@johnjones4096 5 жыл бұрын
congrats on the move to a new shop
@louloedepalma4302
@louloedepalma4302 7 жыл бұрын
Congratz on the new Hut FordTech! Much deserved!
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Thanks!
@haywardsautomotive6156
@haywardsautomotive6156 7 жыл бұрын
Nice video Brian & congratulations on the new house!
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Thanks it's gonna be great I still cannot believe this is all happening!
@haywardsautomotive6156
@haywardsautomotive6156 7 жыл бұрын
You put out great detailed videos with tons of info for your viewers so it's definitely well deserved. Enjoy the fruits of your labor and it's just going to get better!
@baxrok2.
@baxrok2. 7 жыл бұрын
I wish they all came out that easy! Thanks!
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
The only seals I have a problem with is the rear diff pinion and axle seals with the adhesive on them.
@scottscornerrd
@scottscornerrd 7 жыл бұрын
Great job Brian. Like the drones in the back ground!!
@jimmyfiggs6293
@jimmyfiggs6293 7 жыл бұрын
Not to many DIYers have that seal driver tool. You should have showed us how to install the seal with something we have around the garage.
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Good point that is why I mentioned in the video you can tap it into place with a hammer evenly around the perimeter of the seal these go in very easy. This was a customers vehicle so of course I was going to use the proper tool to get it set perfect for them.
@vg8606
@vg8606 Жыл бұрын
Excelent thank you very much i wanna replace drive axle and same time seal axle I didn’t know how hard was but now ..look easy thanks
@bigdog4574
@bigdog4574 Жыл бұрын
These days just rent from autozone!
@chrisryan5668
@chrisryan5668 7 жыл бұрын
Wow really looking forward to see the new shop! The repair videos you put out on the floor of your garage are about as good as they can get. With a lift in a shop they will be twice as good im sure. Really looking foreword to it
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Yup camera angles, lighting, space, shop equipment all is going to be much much better!
@billevans2400
@billevans2400 7 жыл бұрын
Great video Brian. I don't have an AWD Explorer, but still enjoy watching the very professional way you explain and perform these repairs. Hope someday you will do the repair on the drivers side third row seat actuator of 2006 Explorers. Seems to be a common problem. Look forward to seeing the new shop. Thanks......bill
@cruisepix
@cruisepix 7 жыл бұрын
Good luck at the new homestead, hope you get that new shop with a lift save your body!
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Me too it will be so nice.
@minneapolisfoxden528
@minneapolisfoxden528 7 жыл бұрын
great job as always. it is so great to see what I'm getting into before starting it myself.
@paulquitaldi8407
@paulquitaldi8407 7 жыл бұрын
Nice to have a new shop with a lift, that was always my dream, a lift.
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
It will be great the best part of it all.
@MrPami9899
@MrPami9899 7 жыл бұрын
it is crazy how ford did thst drastic change on the explorers,love the 3rd and 4th gen better
@thirtysixford
@thirtysixford 4 жыл бұрын
As always a nice video Brian. I noticed on my daughters 2012 Explorer the two large bolts holding the strut to the knuckle are splined for about an inch and a half or so from the head end and I had to use a brass hammer to get them out after removing the nuts. When reassembling, the bolts are a tight fit, I found it easier to use a wrench to screw them into the strut/knuckle until the splines contacted. Then I used the nuts to pull them all the way in. There was no play at all, so I don't believe there would be an alignment issue.
@thirtysixford
@thirtysixford 4 жыл бұрын
Did a little research, found the bolts were not splined from 11/1/2010 - 8/2/2011. The splined bolts were used after that. You dont need a backup wrench on the bolt head, the splines keep the bolt from rotating while removing the nut.. Also Ford says to not reuse these bolts.
@jeffbrown3963
@jeffbrown3963 4 жыл бұрын
Great video! You always cover everything in detail. Thanks.
@acelinthetimnehgreyparrot911
@acelinthetimnehgreyparrot911 7 жыл бұрын
right on Brian! that is awesome news!
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Definitely!
@brianskinner4328
@brianskinner4328 7 жыл бұрын
I hear ya there. Heck you can even performance vehicles as well as your daily drivers. Just ideas for future videos. I appreciate your videos
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
I may be doing as supercharger install on a Dodge Challenger this spring over on my BSG Automotive channel.
@brianskinner4328
@brianskinner4328 7 жыл бұрын
That's awesome! I'm hoping you can do performance stuff on ford's as well. Anything from mild to wild performance as well as your regular repairs
@rogerchevelle7231
@rogerchevelle7231 5 жыл бұрын
Great video...I'm replacing 2 axles in a Taurus now..Nice R/C collection..like the summits
@jamesr.schroensr8361
@jamesr.schroensr8361 Жыл бұрын
Congratulations. Can not wait. You have saved me alot of money following you. So i am going to subscribe to your page. Thank's .Jim
@abrahamo8934
@abrahamo8934 7 жыл бұрын
how do you know there is not a inner bearing causing problems as there were with other ford transmissions?
@josephtucci3666
@josephtucci3666 7 жыл бұрын
nice job man. GET THAT NEW SHOP DONE ! Joe
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
The faster the better I need to master plan it first.
@timothycc711
@timothycc711 5 жыл бұрын
Well done. I love your carefullness. You probably never add time to the job because you are so carefull.
@misterf150
@misterf150 7 жыл бұрын
2008 ford f-150 5.4 3v, had to grind the inner lip to interface the opening to remove the solenoid and screw, a 3/8's drill bit acts like a dremel tool. but it was a good start.
@hawaiianf1504
@hawaiianf1504 7 жыл бұрын
CONGRATS!! You all deserve this and so much more. We're all so excited and happy as heck for ya. A lift .... HOLY MOLY Batman you're getting a lift in your home garage. That fricken rocks for sure. I want one too! Who Wouldn't love a lift in their garage? You know Ole Scotty is gonna show up here. Bet He's gonna be a bit jealous.
@jorgesuarez1078
@jorgesuarez1078 8 ай бұрын
Add trans fluid to check for leaks before putting everything back.
@dezblyan5125
@dezblyan5125 7 жыл бұрын
way to go looks like you tube bought you a new home lol😄
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
+Desmond Blyan pretty much the wife works really hard too making this all happen.
@dezblyan5125
@dezblyan5125 7 жыл бұрын
Good stuff looks like you worked hard and deserve every bit
@petrocksgarage
@petrocksgarage 7 жыл бұрын
Great video. Very informative. Congrats on the new home. Can't wait to see it. Isn't blue lock-tite on the axle nut a little overkill? It will only add a require a little bit of extra torque to remove later, not a significant amount. 250 ft/lbs of torque should hold it on there pretty securely don't you think?
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
+Pet Rock's Garage it's never overkill when it comes to driveline and suspension fasteners. The amount of vibrations they endure is enough for me to put two dabs of loctite on yes.
@hectorrivera5230
@hectorrivera5230 3 жыл бұрын
great video on how to simplify something that looks kind of Rough.
@peralez2383
@peralez2383 3 жыл бұрын
if only all seals came out that easy
@Chris-Fennimore
@Chris-Fennimore 7 жыл бұрын
Great news on the dedicated shop. Oh yeah, the house too! LOL
@seanmccauley1446
@seanmccauley1446 6 жыл бұрын
Great video. This will help alot with replacing my axle seal on my 4x4 2008 Lincoln Navigator.
@campermike8879
@campermike8879 7 жыл бұрын
I see it's the same one your did the valve cover on. Actually noticed the stained air filter before the shiny clean cover.
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
+CamperMike Yup many problems on this one first year of the new generation Explorer
@mwp2295
@mwp2295 5 жыл бұрын
Do you have a video on replacing 6f50 transmission fluid? I didn't see one, but figured I would ask. Thanks for all your videos, they are very helpful.
@FordTechMakuloco
@FordTechMakuloco 5 жыл бұрын
You can just follow my 6f35 video they are quite similar.
@RobertKohut
@RobertKohut 7 жыл бұрын
Great job! Noticed there was no hub center cap, is there none on these vehicles? You look happy about your new shop, congrats!
@juliefrank8176
@juliefrank8176 2 жыл бұрын
My front tires don't have center hub caps. Maybe it's just a back tire thing.
@nick6834
@nick6834 5 жыл бұрын
Dude you’re awesome!
@shanekneeshaw3483
@shanekneeshaw3483 4 жыл бұрын
That seal was fine for a while i want to see mine talk about oil all over my drive way 😂😂😂
@fireyourrocketts
@fireyourrocketts 5 жыл бұрын
Doing the same for our Toyota Corolla 2004, I expended nearly 2 hours trying to get the seals in (both sides) I do have a seal tool from Harbor Freight, it fits the seals nicely but no matter what I did, always one side gets in the opposite side out, tapping around it did not help either, used 3 different hammers carefully, nothing, after 2 hours i decided to leave it and will try again tomorrow, my seals looks exactly like the one here and the seal tool very similar. I do not want to tap on the edges of the seal afraid I could destroy it, the position I am in to do this makes it even more difficult as i can only lift the car so much, kneel by the driver side allows me to kind of get in a comfortable position to tap the seal in but even like that i could not drive it in straight; top is in while bottom is completely out and now it doesn't even come out, the passenger side is worst (The engine is out of the bay, only transmission in) I can get my body inside the engine bay then kneel with the car raised to max as the jack allows me under the crossmember frame (two jacks support the car on both sides besides this one for safety) but then again no matter how I pound it in, if I tap hard the seal gets in one side and the other out and if I go gentle tapping nothing happens; this is very frustrating! tomorrow with daylight I will try again, this supposed to be easy!!
@Lsutton04_
@Lsutton04_ Жыл бұрын
Needing to do this for a 2011 MKZ awd I just but for the passenger rear axel seal. On the rear axel you can’t even get a slim 3/8 ratchet in to check the fill plug so I can see the level due to clearance issues.
@zied_alotaibi
@zied_alotaibi 7 жыл бұрын
Hello sir, First I would like to thanks to the beauty of your explanation, 'I am follower your channel from Kuwait
@zied_alotaibi
@zied_alotaibi 7 жыл бұрын
I own a 2010 Ford f150 specifications Canada, I have a problem in the mapping system can not download maps of the Middle East .. Do you help me you can repeat
@alejandrobarba1859
@alejandrobarba1859 7 жыл бұрын
thank you for your help and advice
@srlbotanical
@srlbotanical Жыл бұрын
Excellent video. Thank you.
@kevyythemechanic
@kevyythemechanic 8 ай бұрын
Thank you
@indiramedina2060
@indiramedina2060 3 жыл бұрын
Excellent video
@hansamsterdam2635
@hansamsterdam2635 7 жыл бұрын
Thank you for your help and advice, Good video Greetings from Amsterdam.
@Eric19781
@Eric19781 3 жыл бұрын
I have a 2013 escape awd that the drivers side cv shaft moves around in the transmission is there a bushing that I need to replace
@jamesmurphy609
@jamesmurphy609 3 жыл бұрын
heres another vid from him let me know if you fixed yours a different way.....kzfaq.info/get/bejne/hL-Fhq6Xy7q6oX0.html&ab_channel=FordTechMakuloco&fbclid=IwAR0hoeqmtdKeYN5gl68kxhizlK4CE4UXTlmEtiUHlGYPF-8m-yBkHRW1Bnk
@MrCROBosanceros
@MrCROBosanceros 2 жыл бұрын
Hi! Excellent video as always and I don't even own a Ford vehicle. I'm wondering you don't recommend rubbing any oil or grease on the outer surface of the seal that meets the metal. Do you?
@albertfaller9336
@albertfaller9336 2 жыл бұрын
Great video as always. I see the bearing behind the seal are you able to pull that bearing out as well if you want to replace it?
@leordo11
@leordo11 7 жыл бұрын
congratulations best wishes.
@camtheham13
@camtheham13 7 жыл бұрын
awesome, I am guessing you are looking forward to having a lift again
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
Yes big time!
@leonardoramos9114
@leonardoramos9114 5 жыл бұрын
Great job Brian!! Thank you!!
@BADD400
@BADD400 7 жыл бұрын
Good video thanks for sharing
@DeeJJamesJames
@DeeJJamesJames 10 ай бұрын
I just did this job and didn't have the right tool to install - if you have a 3d printer I designed a tool that will make this job 100000X easier - it's on printables "2004-2011 Ford Focus Output Shaft Seal Installer - CV Axle" Hope this helps someone out there.
@mr.rogerzneighborhood5602
@mr.rogerzneighborhood5602 9 ай бұрын
Thanks, Brian for the video. How much should a shop charge for labor for this job?
@jzjzman7569
@jzjzman7569 7 жыл бұрын
we have learned a lot from you and we appreciates that question what about the rear differencial oil on 2011 Taurus SHO when should it be changed? to be honest I have changed the ptu twice and this is my third one so for now I am changing the oil every 25,000 Kilometres for it but never touched the rear one but do I only add oil alone or put fraction fluid with it thanks
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
All you need is 80w-90 for the rear diff- amzn.to/2ip6Ukk
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
In reality these can go 60k miles before they should be changed out on the Taurus whereas on a truck that tows I would say every 30k miles.
@leo28a
@leo28a 7 жыл бұрын
FordTechMakuloco how many quarts for the rear diff. ??
@onebulletplease
@onebulletplease 6 жыл бұрын
Thanks for another great video.
@cjm5161
@cjm5161 4 жыл бұрын
This is why I buy toyotas and hondas
@srercrcr
@srercrcr 7 жыл бұрын
Congrats!!
@aron2perez311
@aron2perez311 2 жыл бұрын
Nice video
@wyrtwister4260
@wyrtwister4260 7 жыл бұрын
You used a sharpie to mark the original position of the knuckle to strut . Would it help accuracy when reassembling , to also mark that spot ( on the knuckle ) with a scribe ? Great video . ! God bless Wyr
@bigmikeLLCinc
@bigmikeLLCinc 3 жыл бұрын
My '08 ford explorer xlt has one front and one rear axle seal leak. I am wondering if it is worth it to replace CV axles or just the seals? Vehicle has 107k miles. Thanks and awesome video!
@amtpdb1
@amtpdb1 7 жыл бұрын
The bolts on these aren't like the ones on the trucks,one time only use? Thanks for the videos.
@zacharyreese9703
@zacharyreese9703 7 жыл бұрын
love the Ford videos, they have helped me in the past. I have a question, I have an 05 extended cab F-150 lariat the rear sliding window doesn't work. I've switched the rear window switch with a known good rear window switch and still nothing. any help would be appreciated. thanks again for the great videos
@leo28a
@leo28a 7 жыл бұрын
Great vid. Brian Do u remember how many quarts of lub. U did add to transmission. ?? And what kind of lub. ?? Regarding Abs wire, it doesn't exist in my 2012 explorer !! Strange indeed
@djr3485
@djr3485 7 жыл бұрын
On some vehicles there is also a seal on the steering knuckle which needs to be replaced whenever the cv joint is removed not sure if this Ford has one.
@user-br3ln5ub7w
@user-br3ln5ub7w 7 жыл бұрын
Hi! Will you tell me about the reliability of 6F35 to 2013 Ford Escape, please. And how often you used to change oil fluid in 6F35.
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
30k the first time and every 60k miles after.
@abiel.rodriguez
@abiel.rodriguez 7 жыл бұрын
Ok Ima be clear with your video. I liked most of it however, the main axle nut should never be tightened with an impact gun because you might have stripped threads but since its locked, noone would notice until the next teardown a few months/years later. It happened on a repair that I was performing, all necessary precausions were made to remove the nut but the previous guy had used an impact to run it thru and be done with it.....it could have been avoided by using a regular ratchet and tightening carefully, what "extra time" would it take? maybe 20-30 more seconds. I dont see the harm....So basically I ended up with a stripped axle and I had to take it to a machine shop to recreate the threads. Please dont use impact guns on the main axle nut....never ever.....Just spend 20 more seconds with a ratchet....its really not that difficult.
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
I have used a impact to run them down for 12 years now day in day out all you need to do is thread the nut on by hand until the nylon insert stops you then impact until it bottoms out and finalize with a torque wrench it's pretty simple and foolproof actually.
@abiel.rodriguez
@abiel.rodriguez 7 жыл бұрын
The main axle nut with nylon? The ones I know dont have nylon....and actually It may be fool proof for you, but common sense is not common for lots of people, the threads can be stripped but the high force applied initially. It is not a bad advise to run it manually with a ratchet until it bottoms and then use torque wrench. Like I said, maybe extra 20-30 secondsr that can save a lot of money in the long run.
@vicforster919
@vicforster919 7 жыл бұрын
Brian I watch your video's everyday, my Ford F150 has about a 100,00 miles on it.the gas milage is though the roof. whats the best way to get the most from my 5.4 3V its only a 2009?
@craiglamb9029
@craiglamb9029 7 жыл бұрын
Nice traxxas summit's!!!! 👌
@fadiz9190
@fadiz9190 14 күн бұрын
The axle came out about an inch and stopped.. it's just stuck won't pull out or go back in on the splines... any idea what's going on
@Mohammed.photographe
@Mohammed.photographe Жыл бұрын
Changed it last year and still leaks so my question is could the sound I hear while driving be the axle itself that’s worn out and causes the leak (sounds wobbly and louder as the speed goes up)
@leegray6165
@leegray6165 Жыл бұрын
Got a P/N for the seal tool? Thanks.
@jgouldsmith
@jgouldsmith 4 ай бұрын
I want to buy the correct seal install tool. But having problems finding exactly which one I need on Amazon. Would appreciate any help on which one I need to buy. The above link in video comments is not valid anymore for the seal install tool.
@alb12345672
@alb12345672 7 жыл бұрын
Ok to reuse the circlip? I know some shop manuals say to replace.
@FordTechMakuloco
@FordTechMakuloco 7 жыл бұрын
+alb12345672 perfectly fine we do it all the time
@montydaniels1054
@montydaniels1054 3 жыл бұрын
@FordTchMakuloco. Are the bushing puller tools like you used for the bushing even available to rent, or purchase? Looks like something to have in the tool chest..... Working on a 2010 Mercury Milan w/4cylnder with an automatic trans, left side is bad. I see that it's a dealer seal-kit so you have to go by VIN. For these vehicles, Ford built transmissions here in the US, plus they had transmission's shipped her from Asia. That's what turned it into having to call a Dealership for the correct Seal-kit.....
@olenaerhardt7725
@olenaerhardt7725 3 жыл бұрын
@ 16:15 If no grease on the seal (on rubber part inside), what grease to apply? I have automatic (2001 Saturn SL2). The seals I bought are Timken 4614N Seal and National 4613N Oil Seal. What Seal Installer was used? Is it fm/Amazon? Thank you for the great film, really the best on the project.
@StevenSugref
@StevenSugref 2 жыл бұрын
Thanks for the video. Is that amount of movement normal? (When you grabbed the mixed the inner cv after fitting).
Ford & Dana Axles Pinion Seal Replacement: Tricks of the Trade
35:45
FordTechMakuloco
Рет қаралды 1,2 МЛН
2007-2019 Ford 6F50/55 Six Speed Transmission: Fluid Exchange Procedure
11:48
КАКУЮ ДВЕРЬ ВЫБРАТЬ? 😂 #Shorts
00:45
НУБАСТЕР
Рет қаралды 3,1 МЛН
Son ❤️ #shorts by Leisi Show
00:41
Leisi Show
Рет қаралды 10 МЛН
My Cheetos🍕PIZZA #cooking #shorts
00:43
BANKII
Рет қаралды 26 МЛН
Kind Waiter's Gesture to Homeless Boy #shorts
00:32
I migliori trucchetti di Fabiosa
Рет қаралды 11 МЛН
Why Ford All-Wheel Drive Power Transfer Units Fail So Often
6:53
FordTechMakuloco
Рет қаралды 343 М.
How To Change A P.T.U On A Ford Edge. Without Dropping The Subframe!
28:19
RedNecks & DirtyHands
Рет қаралды 22 М.
Driveshaft seal- ford focus drivers side (2004 2017)
12:27
ALL THINGS JIM
Рет қаралды 69 М.
Ford Escape 6F35 Transmission LH Axle Seal Leak Repair
25:37
FordTechMakuloco
Рет қаралды 303 М.
2004 2015 toyota sienna driver side cv axle and axle seal replacement
14:47
Ford 6F35 Full Rebuild | 6 Speed Transmission 2009+
1:12:59
Big Ben's Cars & Cycles
Рет қаралды 8 М.
Passenger Side PTU Front Axle Seal Replacement on 2009 Taurus X AWD
11:38
КАКУЮ ДВЕРЬ ВЫБРАТЬ? 😂 #Shorts
00:45
НУБАСТЕР
Рет қаралды 3,1 МЛН