2007 Chevy Silverado shifter stuck in park. Spring in shift handle pops out, bends from wear .

Рет қаралды 119,186

5 жыл бұрын

Shifter stuck in park., small spring in shifter handle bends out blocking the shifter from engaging. I trimmed mine just a bit, with wire cutters. Works great.

Пікірлер: 28

@antoniotorres3000 3 жыл бұрын

My mother in law bought a 99 sierra for cheap from neighbor and I had to unhook from trans just to move next door..Checked all fuses and also swapped 2 different shift brake solenoids from junk yard and nothing.After watching your video went out removed the 3 screws and part and found the pin was bent and not sliding back down,and pretty sure the spring was gone also. I'll just go back to the junk yard to look for parts. Anyway,I was so hyped to find the problem that I felt I had to leave this long @$$ comment.Thanks man.

@ronfox5519 Жыл бұрын

Very nice. This is what mine feels liike. I havent had it apart yet, but this will be the first place i look. Thanks a bunch

@agaplus01 3 жыл бұрын

This solution worked for my 2007 Chevy! Thanks for sharing!!!

@cpkkustomscpkkustoms3088 4 жыл бұрын

Thanks helped a bunch it was my spring grate vid

@bigwill0946 3 жыл бұрын

Sorry viewers, I was on my way to work when this happened. I wasn't prepared to film this at that time. The SHIFT LEVER that puts the vehicle in gear has a small spring, " kind of like on a push pen" the spring is what pushes your lever when engaged. If you look on the side of the lever you can see it, some times it bends and come out of place so it gets in the way of pulling the lever torward you. If pushed back in place you will be able to engage the shifter. You can trim the spring if its not to damaged or you can replace it. Its bends into the area like a (L) shape so the spring need to be strained out straight ( l) to allow you to engage.

@johniredale912 4 жыл бұрын

yup excellent video! now I have a perfect working knowledge of....your keys.....

@timpage9195 11 ай бұрын

Hello my friend, i had this problem, so i started watching videos last week, most of them pointed to the brake sensor mechanism, they said take that off and you can overide it and it will go into gear,,i did that, didnt work, so they were saying next replace the shifter cables, so i was like, wow thats gonna be a job, so as i was looking at those videos and im at the point im gonna just take it to a shop and spend 500 dollars, including tow, i came across your video, with my hopes down i got in my truck, didnt even have to take that top steering wheel cover off, i saw the spring, i stuck a flathead screwdriver in there wiggled it around a little bit, it was tight,,but a little piece, about a 1/4 inch long came off, i thought i broke it, so i pulled it out, but then i noticed another spring and it was tight, so i thought,,well im gonna try the gear shift, turned the key to on and it shifted into all gears like butter, mabe that little piece of spring was something important, dont know, but my truck is running again, and the gear shift is as smooth as butter..you saved me alot of money..thank you and God Blees

@gregorywilson8840 Жыл бұрын

Thanks bro saved me hours!!!

@abundanciauniversal4298 4 жыл бұрын

Thanks I unplugged mine and it works but I always put the parking brake when parked. I will search for the part.

@jaymimi543 5 жыл бұрын

Your video will help if we can see what your taking about your video shows just your keys

@fandechavalones3022 2 жыл бұрын

1:08 that has a harbess that has 2 wires where do they go to ?

@alanrichardson5656 2 жыл бұрын

So I’m having the same problem did you ever figure out what the part is called so I can fix mines this video was very helpful by the way

@bigwill0946 2 жыл бұрын

Yes, I dont recommend buying an after market, either buy it from the dealer or take it off a similar GM at the juck yard. I bought a dorman one but the white plastic clips and design were different and it did not shift the vehicle properly. Buy one uses on ebay or go to the junk yard if you dont want to buy it from the dealer new.COLUMN SHIFT MECHANISM

@alanrichardson5656 2 жыл бұрын

Thank you so much!!

@deanjeas5394 3 жыл бұрын

2007?

@michaelanthony5335 4 жыл бұрын

Check dorman parts

@matthewmateriale2046 3 жыл бұрын

Maybe get a better view then just your keys

@genewileyopa 3 жыл бұрын

My spring is broke.Now how to get new spring into snifter :(

@jakeclemons650 3 жыл бұрын

I am wondering the same thing

@genewileyopa 3 жыл бұрын

@@jakeclemons650 I ended up putting a new assembly in on the shifter column. Works fine now. Wasn't that hard of a job.

@seanmartensen2179 3 жыл бұрын

Any luck finding the spring? Mine broke too and I'd rather not have to tear it apart further to replace the whole thing if I can just slip in a new spring..

@genewileyopa 3 жыл бұрын

@@seanmartensen2179 That is so tight to try and get one in there. Try turning your key all the way to counter clock wise then see if the shifter will move. Mine wouldn't come out of park, and when I was working on it that is what I did and it come out of park for me. I still replaced it all.

@PJ-SC Жыл бұрын

@@seanmartensen2179 Kind of late but maybe it’ll help someone. I had a similar problem. The same spring in my shifter broke into short pieces and my truck wouldn’t go into park. I searched a couple of parts stores but had no luck. I found a fairly strong spring of the same diameter (~9mm) at Ace Hardware. I had to cut it to the same length (it was 3-4 times longer). It was tough to work it into place but I was able to get it in the same position as the broken one. Works like a charm now.