if your not getting any rear lights, tail lights, brake lights nothing at all then this is probably your fix. if you've lowered your bike then you really need to check this out! Thanks
Пікірлер: 28
@theOnlydoubleP Жыл бұрын
Great video. Thank you. Found the problem. In my case, no lowering, just old.
@curtisnstacey Жыл бұрын
good deal. i appreciate ya stopping by and watching. took a bit to figure it out
@ryanlapierre31562 жыл бұрын
Thank you for the Video! I 100% had that Problem, First Ride after Lowering my Bike with the Lowering Links... My Harness Looked the Exact way... You Saved me Alot of Head Scratching! Thanks alot
@curtisnstacey2 жыл бұрын
your very welcome and i appreciate you stopping by my channel and watching. thanks so much
@TheKerstingm10 ай бұрын
How low did you drop yours? I only went down 1 hole which I believe was one inch. Not sure how long before my got chewed up, it was a while before 8 started getting mysterious fuse blowing.
@keithsmith4333 Жыл бұрын
Thank you so much.
@curtisnstacey Жыл бұрын
your very welcome my friend
@dennisking3638 Жыл бұрын
Ty my brother
@curtisnstacey Жыл бұрын
yes sir, your very welcome. subscribe if you want. im about to post another video of a problem fix free of charge on a harley. stay tuned
@TwoWheelRocco Жыл бұрын
Great Job....Ty.
@curtisnstacey Жыл бұрын
no problem at all. I appreciate you stopping by and commenting.
@MykelTaylor-u5b25 күн бұрын
Does that harness include any wiring for the tour pack?
@MykelTaylor-u5b25 күн бұрын
Does that harness include anything wiring got the tour pack?
@stockischeap7328Ай бұрын
Great video.
@stockischeap7328Ай бұрын
Did your radio, cruise control and horn stop working too
@curtisnstaceyАй бұрын
@@stockischeap7328 no but check your fuses on the left hand side of your bike. One might be popped
@stockischeap7328Ай бұрын
@@curtisnstacey thx curtis , trully appreciate this video, btw. Did you repair or rebuild your old harness?
@curtisnstaceyАй бұрын
@@stockischeap7328 I actually cut the wires and rewired it. I kept the same ends just spliced in new wires and it worked perfect. Your also very welcome and I appreciate you taking the time to watch my video
@stockischeap732826 күн бұрын
@@curtisnstacey Curtis, i wish i could send you the photo of how bad mine was when i pulled it off. Good news is, i rebuilt the harness with an extra 10 inches to run it on the side of the underbelly of the fender. Put back on the hogsworks lowering kit and shakalaka, no more issues when the tire hits. Althought im contemplating removing the lowerkit all together because the bike seems to ride better without it, your thoughts on this
@TheKerstingm11 ай бұрын
Yeapers I found your harness's twin on my fender yesterday morning, I'm talking identical twin. Sure would of been nice to know this before installing them lowering brackets. How do you prevent it from happening?
@curtisnstacey11 ай бұрын
kinda hard to say. i did another one and the guy wanted it ran on the outside. with all the bags and back box you could see the wire but not much of it. still works to this day. other than that im not sure. those lowering brackets are needed by some riders.
@TheKerstingm10 ай бұрын
Is this a possible problem when switching to shorter shocks also? I am a taller rider, I have to admit I do like the lower center of gravity when lowered. It's back to stock height right now.
@curtisnstacey10 ай бұрын
if you change to a shorter shock then your probably using the lowing brackets as well. if not then you shouldnt have a problem. the big problem is the lowering links used.
@TheKerstingm10 ай бұрын
My lowering brackets have gone to the dump weeks ago when I took them off. That was even before seeing your video. Thank you again for posting it. What are you running now, stock shocks at stock height?