2007 Honda Shadow Front and Rear Wheel Removal and Installation. Full Process. Shaft Drive.

Рет қаралды 23,110

Күн бұрын

My front tire kept going flat toward the end of the season last year and my rear was bald. I decided it was time for tires. Here is how I got the wheels removed from this 2007 Honda Shadow Shaft Drive 750. I hope it is helpful. Thanks for watching!

Пікірлер: 104

@chrismooney5737 7 ай бұрын

Thank you very much for this video I just got a shadow maybe 2 months ago couldn’t find videos for nothing

@doingstuffwithdylan4367 7 ай бұрын

Should have more to come. Thank you for the comment.

@chrismooney5737 7 ай бұрын

@@doingstuffwithdylan4367 no problem by any chance are you gonna do the rear brakes ?

@201rainyday Жыл бұрын

Brutally honest video!! You didn't hide the B.S. problems we will all run into!! We need more creators like this!! Thx bud!!!

@doingstuffwithdylan4367 Жыл бұрын

Thanks man I try to keep it real.

@KGisWatching 4 ай бұрын

10:27 the shaft unit has the drive pins that are keeping your tire from being removed. Those pins are part of a plate that easily comes out of the shaft unit, then the wheel just comes out, no struggle. Something the manual states. ;)

@doingstuffwithdylan4367 4 ай бұрын

Thank you for the tip. I think that is how I did it in my short.

@sebastianphillips2772 2 жыл бұрын

Dude you are the man! Saved me a buncha guesswork...if I could, I'd buy you a beer 🤘

@doingstuffwithdylan4367 2 жыл бұрын

Thanks a lot man! Glad I helped. Not a drinker but thanks anyway!!

@wigletron2846 2 жыл бұрын

Probably the best video out here. Like you said not a lot of info on this. Ran over a damn screw, I'll be using this video.

@doingstuffwithdylan4367 2 жыл бұрын

Thanks man! I have another flat on mine too! Not excited about doing in the gravel driveway! Good luck thanks for watching!

@Scootphoria 3 жыл бұрын

I use a 2X4 under the rear tire to raise/lower it instead of man handling it. Easier and lets you keep the other hand free for the twisting and lining up. But at least you posted a video while the rest of use arm chair coach. Good video. Thanks.

@doingstuffwithdylan4367 3 жыл бұрын

Good idea it sure is a struggle. Thanks for the comment! And watching! And the tip!

@frozenarrow7930 7 ай бұрын

Thank you for making this video! You don't know how much it helped!!!!!

@doingstuffwithdylan4367 7 ай бұрын

I’m glad I know I had trouble the first time I did mine

@ShadowRC50 Жыл бұрын

Thumbs up. Very good video with lots of helpful information. Thanks

@doingstuffwithdylan4367 Жыл бұрын

Thanks! I appreciate the comment!

@Jay-jb8lb 2 жыл бұрын

Much thanks and appreciation for this video helped me out a bunch I'll let you know how it goes back on thanks again brother blessing

@doingstuffwithdylan4367 2 жыл бұрын

No problem man I’m glad it was helpful. Thanks for watching and for leaving a comment!

@bob14072 10 ай бұрын

Nice job. I learned a lot. Thanks.

@doingstuffwithdylan4367 10 ай бұрын

Thanks I’m glad. No problem.

@ruizchicago 5 ай бұрын

Hey Dylan thank you so much for this video definitely saved me so much time 🤘🤘🤘

@doingstuffwithdylan4367 5 ай бұрын

Exactly why I make videos! Thanks for the comment!!!

@JeromeLouvet Жыл бұрын

Hi Dylan, thank you for this video! I will change my rear break on my Honda Shadow Spirit 750, so your video helps me a lot. I will also do a video for my channel. I am french but the video will be in spanish. Greetings from Munich (Deutchland)! ✌

@doingstuffwithdylan4367 Жыл бұрын

Hope it’s helpful!!

@poopiecakes32 3 жыл бұрын

Hell yeah man thank you!!! Luckily I don’t have to remove my exhaust with my short shots lol! Thanks again!

@doingstuffwithdylan4367 3 жыл бұрын

Must be nice! Thanks!

@wigletron2846 2 жыл бұрын

If you have a jack you can do it without removing the exhaust if you let the wheel droop

@doingstuffwithdylan4367 Жыл бұрын

@@wigletron2846 good to know!

@codyrae549 2 жыл бұрын

That was great! Thanks!

@doingstuffwithdylan4367 2 жыл бұрын

No problem Thanks for the comment thanksfor watching

@joseleiva6368 3 жыл бұрын

Thank you, Sr. from Jose.

@doingstuffwithdylan4367 3 жыл бұрын

Your welcome. Glad to help!

@arkansasvinny 3 жыл бұрын

I am about to do this to my back tire. I think after watching you and the difficulty getting the tire to squeeze out and back in, I will attempt to use a clamp on the tire to narrow it and see if that makes a difference on getting it to fit out and in between the rear arms and drive shaft. maybe a little cooking oil where the tire touches also. I will let you know how it went.

@doingstuffwithdylan4367 3 жыл бұрын

Thanks and good luck. Get it high as possible!

@1deliveryboy Жыл бұрын

It is watching you work on that bike without the right kind of jack, and then to see no anchoring to the handlebars that would stop it from falling over. You had a forklift sitting right there that would have been a little safer than jack stands, 2X4's and a floor jack. You did get the job done so kudos for that. I now have refreshed my memory on how it came apart, so again I thank you for that. It looks as though the front of the frame is just teetering on the 2X4's. I again want to thank you for sharing your video. I hope going forward that maybe a little more thought goes into SAFETY, so that you will be able to share many more of your helpful videos.

@doingstuffwithdylan4367 Жыл бұрын

Thanks for the response. I was not trying to be a smart ass just wanted more insite on your comment. The fork lift has no brakes so I’m not sure that would be safer. I only work on my own bike so buying a lift for use once a year seems unnecessary. I made a short of rear tire install that would definatly make u crimge and give you even more info. Hub came off with rear wheel. Much easier. Thanks again for the comment and reply.

@1deliveryboy Жыл бұрын

A lot of info here. I learned more don'ts than do's, but it was still helpful info. Sorry I did not see much in the way of safety. :(

@doingstuffwithdylan4367 Жыл бұрын

What donts did u learn.

@mordicus420 3 жыл бұрын

Just got my hands on the Shadow Spirit vt750 c2 Thinking of changing the back wheel for a Fat tire, wandering what size i can put on etc New sub btw 👊

@doingstuffwithdylan4367 3 жыл бұрын

Really not sure tbh. I know it’s a bitch with the stock wheel and tire!

@celestinorivera9674 2 жыл бұрын

Thanks man

@doingstuffwithdylan4367 2 жыл бұрын

No problem. I’m glad it was helpful!

@OneAsterick 3 жыл бұрын

Remove the rear lower shock bolts and the swing arm will drop below the exhaust and you will not have to remove the exhaust.

@doingstuffwithdylan4367 3 жыл бұрын

Thanks for the advice I’ll try that next time!

@44Lilith 2 ай бұрын

No need for any grease on the axle? This is a very helpful video just a question I thought of.

@doingstuffwithdylan4367 2 ай бұрын

I don’t think it’s necessary, but I never read the manual either

@CenobiteBeldar 2 жыл бұрын

You can't loosen the axle nut before removing the brake caliper? I figure pulling in the front brake lever to lock the front wheel as you loosen the axle nut will make the axle nut losen better.

@doingstuffwithdylan4367 2 жыл бұрын

Yep that may help. I did not have a buddy and sometimes heat can be your friend! Thanks for watching and the comment! Thinking back I might have tried that.

@gavinharrison4639 3 ай бұрын

You wouldn’t happen to have a video on installing the drive shaft back? I wish I would’ve came across your video before getting the bike ripped apart😅

@doingstuffwithdylan4367 3 ай бұрын

Sorry, no such video yet

@nolancooke-pb7co Ай бұрын

Its easy. I actually unbolted those 4 bolts that attach the shaft to the drive just to get the tire out. Mine didnt pour oil out. Once you get the new tire on and those 5 pins aligned with the wheel assembly, you have to feed the shaft and slowly spin the tire in neutral til those gears seat properly. How you know its fully lined up is when it pushes all the way in onto the 4 bolt holes. I recommend threading the 4 nuts on snug too once you think its seated and put it in first and try to turn the rear tire. If it catches gear youll know its in. Be gental not to damage those gears on the head of the shaft too when spinning it. Lmk if you got it i can make a vid for ya its easier shown than explained :)

@fadiabdo9976 4 ай бұрын

After they changed my shadow chain I see the rear tire not aligned is there a way to do it myself?

@doingstuffwithdylan4367 4 ай бұрын

I’m sure there is but I don’t know what it is mine is shaft drive

@kevincashion9303 3 жыл бұрын

Lol, thanks man.

@doingstuffwithdylan4367 3 жыл бұрын

It’s a pain in the ass. Hope this was helpful! Thanks for watching and the comment!

@grOhio61420 3 жыл бұрын

Ammo cans would be sweet

@doingstuffwithdylan4367 3 жыл бұрын

I’m doing it! 40mm

@turbomursu 3 жыл бұрын

I got jerry cans on mine

@doingstuffwithdylan4367 3 жыл бұрын

@@turbomursu pics? I bet its sweet!

@mariacichowski5405 Жыл бұрын

Any tips for installing the exhaust? I think I've spent two hours trying to get the dang thing on and saw you edited out actually getting it on lol

@doingstuffwithdylan4367 Жыл бұрын

Keep the rear high and kind of roll the front in.

@doingstuffwithdylan4367 Жыл бұрын

This may help. kzfaq.infosslxN_SplwU?feature=share

@doingstuffwithdylan4367 Жыл бұрын

And I just watched it. It’s there. 20:10

@ninonkliton3890 2 жыл бұрын

I have 06 shadow vt750c a/a aero what size is Allen hex on front axle Help & thanks

@doingstuffwithdylan4367 2 жыл бұрын

17 mm

@deathfoxstreams2542 Ай бұрын

What tools were you using like exactly

@doingstuffwithdylan4367 Ай бұрын

Pretty sure they’re mostly listed but they’re 12 mm 17 mm hex. 6mm Alan and 8 mm Alan.

@user-sw1fv7fb3e 5 ай бұрын

dude gave me a good idea but you should have a motorcycle jack stand any thanks

@doingstuffwithdylan4367 5 ай бұрын

It would have made it easier

@user-sw1fv7fb3e 5 ай бұрын

yea understand thanks for help@@doingstuffwithdylan4367

@arashhosseini4843 2 жыл бұрын

Please please help my rear shaft on cx650e is not coming out and I'm sick of trying and trying it not work

@doingstuffwithdylan4367 2 жыл бұрын

I did not remove the rear shaft. Not real sure how to help. Thanks for watching and the question. Sorry I was not more helpful.

@davidfitzgerald6795 3 жыл бұрын

That gear box has to come off or something to make it easier right? I'm going through the same thing this evening

@doingstuffwithdylan4367 3 жыл бұрын

Not really sure the easy way. This is the method I used I cut out a bit if my struggle but not a lot. The higher the better and take the shock loose on both sides. Good luck!

@davidfitzgerald6795 3 жыл бұрын

I ended up doing the exact same thing as you. From what I've seen on other videos seem like some shadows has skinnier back tire making it just come right out.

@caseys.6857 2 жыл бұрын

I apparently messed up taking mine out. I DID in fact take that rear gear box off. Unfortunately the shaft came with it. Now the shaft won't go back in enough for the box to get bolted back on. I've been searching all over and haven't found anything. Any ideas? Can't really take it anywhere without a tire to move it... I'm stuck.

@davidfitzgerald6795 2 жыл бұрын

Man that blows.... I ended up just letting the air out of the tire and working it back and forth till I got it out. I suggest that you take it to a honda dealer. Maybe find someone to haul it for you or rent a uhaul. Good luck man.

@doingstuffwithdylan4367 2 жыл бұрын

Agreed good luck. They are defiantly not easy!

@joevillan892 3 жыл бұрын

Imagine 12am on the side of the road doing this?

@doingstuffwithdylan4367 3 жыл бұрын

Sounds awful! How did you lift it?

@joevillan892 3 жыл бұрын

@@doingstuffwithdylan4367 push on a trailer and let mechanic deal with it!

@doingstuffwithdylan4367 3 жыл бұрын

Good idea!

@walteralonsoaldana8367 10 ай бұрын

How much did you pay for both tires? Thanks

@doingstuffwithdylan4367 10 ай бұрын

300 ish for both

@elliotteichman2174 2 жыл бұрын

you do not remove brake arm you loosen cable and remove brake housing asm when wheels out leaving just drum on wheel

@doingstuffwithdylan4367 2 жыл бұрын

Yeah that might be easier will defiantly try it that way next time! Thanks for watching and the tip!!!

@frednot809 2 жыл бұрын

If I said caw caw you would say?

@doingstuffwithdylan4367 2 жыл бұрын

I’m not sure what you are asking.

@frednot809 2 жыл бұрын

@@doingstuffwithdylan4367 LOL it’s a call sign of sorts within the honda owners group I’m with.

@grOhio61420 3 жыл бұрын

2 ugga duggas 😂

@doingstuffwithdylan4367 3 жыл бұрын

You know it!

@user-kp8iw1ho7x 4 ай бұрын

Подшипники помазал?! Всë на сухую! Разобрал пол мотоцикла что бы поменять резину и собрать обратно! Звезду в редукторе тоже не снял! У вас там отсутствует смазочные материалы в рем зоне????!!! Полуося сухие совсем! Всë пневмо пистолетом закручивает!

@doingstuffwithdylan4367 4 ай бұрын

The bearings don’t require to be lubed when I could’ve put a little grease on the axle shaft probably but I don’t think it would help

@Marcelo-hf5zr Жыл бұрын

👎

@doingstuffwithdylan4367 Жыл бұрын

Sorry.

@gregoryponton4229 3 ай бұрын

When I do mine I drop the drive shaft out with the wheel. Slides right out. I am due a new tire on mine so I am going to a all weather car tire. Making my rim tubeless.

@doingstuffwithdylan4367 3 ай бұрын

Would like to see a video of this.