Idle relearn procedure if you ever disconnect the battery for any reason or have idle issues. Step 1: Turn the key to the ON position but do not start. Step 2: Press the accelerator pedal ALL THE WAY to the floor and hold it for 40 seconds. Step 3: Release the accelerator pedal ALL THE WAY and count for 35 seconds. Step 4: Press the accelerator pedal all the way to the floor and hold for 30 seconds. Step 5: Release the accelerator pedal and count for 25 seconds. Step 6: Press the Accelerator pedal to the floor and hold for 20 seconds. Step 7: Release the accelerator pedal and count for 15 seconds. Step 8: Press the accelerator pedal to the floor and count for 10 seconds and then release the pedal for 10 seconds. Do this 2 times Step 9: Quickly press the accelerator pedal to the floor and then release three times. Step 10: Start the engine.

Brother, 😭. Thank you so much. My car started to putter and stutter during idle and take offs. My check engine lite went on and I used a code reader to learn in was a cylinder 2 misfire. I just did this with your help. Got a new cylinder coil plus all the parts for $187. You’re the Saint of 🚘 Repair. I can’t thank you enough. Your steps were clear and precise. You Rock!

Hey just wanted to say thanks for the instruction on the air filter orientation. I had no idea you had to place it a certain orientation in the box. I have fought that crap for years. Sure enough, when it's oriented correctly, the lid can be bolted shut much easier. Thanks again!

Thanks for the video. Saved me a couple hundred bucks doing this my self. I replace the air filter, cabin air filter and spark plugs. Cheapest tune up to date since I was able to do it myself.

Yes and I can’t afford 500 bucks for a tune up right now. May God bless you abundantly!

I appreciate this video so much. Thank you for taking the time to create it and break each step down. First time changing spark plugs in a vehicle and was very successful because of this video. Thank you. Thank you. Thank you.

Thank you for making this video as it gave me the confidence to do the tune up on myself. I ordered the same parts you used so glad you provided the part number! My car runs like a dream now! Thank you again!!! You have a gained a subscriber.

Man, thanks for this easy-to-follow lesson. I just got a 2007 Camry and I feel like I can do this after watching your video.

Well my friend. It is people like yourself that make a little difference in this world. You saved me a lot of money 💰 and I thank you

you don't even know, you are the best teacher!!! you make it so simple. I got it and did my entire tune up thanks to you ✊thanks fam❤

Shop quoted me 300 plus to do this. I'm going to do it myself tomorrow. My last vehicle was an 02 V8 f150 and was much more difficult. Thanks for the video!

Thank you soo much for taking your time to make this video for all of us. You presented it soo smooth. Thanks again

This was a good damn video, clear instructions and straight to the point. Thanks for sharing man!

Finally a simple straight forward video with tools required thanks

Hey Man! Thank you sooo much your video gave me the confidence to do the tune up. I ordered the same parts you used thank you for providing the part numbers!

Great job. Really appreciate it. Even with one hand, you did a wonderful job.

I’m a girl but I’m def doing this myself it looks so easy 😭. Have a 2007 Toyota Camry. Auto zone says it’s a cylinder 2 misfire but I’m changing all 4 coils & spark plugs soon, thank you for your help 💗

Thanks to you I completed the tune up was a success! Funny thing, it was as if you were there with me talking me through the process. Thanks again.

Thanx a million! You made it easy to understand from start to finish!! Bless Up!

Thanks so much! Learned a bunch and am off to do this to my 07 Camry.

My taps broke also and I got new housings on Amazon. They were pretty easy to replace without needing to cut any wires.

Thank's for the info. and hands on demo.Good looking out.

U r very welcome MrV2u.I change my air filter to a KNN already I am going to change the spark plugs today.The check engine light came on a is staying on along with the traction control light.I went to AUTO ZONE and got a code reading .For some reason one or more is misfiring.So I will change all 6 of them.U r giving very useful information that will come in handy for me.Keep up the good work.I just subscribe to ur channel.Peace.

You are amazing! Very nice presentation. Thank you.

Unbelievably kind of you! And you make it look easy!

Thanks for the no bullshit vid. Great job

No need to gap the plugs?

Using the anti-sieze on iridium spark plugs is actually detrimental than it does good. However,if you use copper spark plugs it a very good idea. The anti-sieze will eat the platinum or iridium coating it has on the thread. While the copper spark plugs it steel and most likely on any newer vehicles the block is aluminum. This will prevent galvanizing(rust) to happen.

Great video.Very easy to understand. Do you have to replace those coils the way you replace spark plug wires?

Thank you for the ease of your videos, could you do one for a 2008 nissan quest water pump change? Thanks!

Thank You for making this video

Love the video man I'm cartarded so nice description

Awesome. Thanks for this. Great stuff.

Thank you, your video save me money

Very good explanation.. Thanks

What happens if you don't screw in the spark plugs coil ?? Will it damage anything,??

Great detailed video tutorial! This is going to be my first time replacing my spark plugs. I'm curious as to what "torque" is in terms of screwing the spark plugs in? Is it the amount of force your using to screw them in?

Thank you for this. I may need to try it. When I was driving I came to a stop to wait to turn, the engine was idling rough. I turned the heat off and the idle was smoother...what does that mean? Thanks for any suggestions! Appreciate your channel.

Great video Thank you Brother.👍🏻

never seize is a must great job

nice work man .. could you please write down what were the matrials you used on the sparks .. and you suggested to put at the coils?

THANKS...Great video & very educational (I LIKE)

Very simple explanation

Thorough explanation

Great video ! Thanks !

Yo good vid, bout to do it rite now.

Great video. Did you have to gap the spark plugs? Or do they come pre-gapped?

Thanks for the video sir. But I have a question; is it necessary for spark plugs to be gapped to vehicle specific, even if they are pre-gapped. I'm asking because I dont ever plan on paying someone else to do it if I can myself. Can let me know please. I look forward to hearing back from you soon as you are able.

A lot of the new iridium plugs don’t need anti seize. Manufactures recommend against it because you need to use less torque when you apply anti seize, it’s much easier to over torque them. Find the torque spec for the plugs which in this case is 18 lb ft and don’t use anti seize, the plugs already have a coating on them.

I bought coils, plugs,and cam sensor. Think I can do ok with the plugs and coils but no clue where the sensor is located or how to replace it 🤷‍♀️

Hi from Australia Sydney. I have this exact car Camry altise. And recently got tune up including spark replacements. When how long do we wait till need replacing. Thank you

Thanks. Good stuff.

Good video, but Denso recommends not using anti-seize lubricant on the spark plug threads, as it may cause them to vibrate loose.

Is it necessary to disconnect the negative terminal from the battery first? Or it doesn’t matter? Thanks so much!

Thank you for share you knowledge good man! my question was how many mile do you have to change the spark plugs? but I found your answer below, you said around 80 k miles, right? thanks again good man!

The place changed the coil pack and wires last year but I wanna change the plugs for a tune up do u think it's a good idea

BRO! AND IM NOT YELLING. I FORGOT MY GLASSES AND IM NOT SQUINTING. THIS VIDEO IS SO THOROUGHLY SHOT, I F-N LOVE IT! YO TAMPOCO HAVE THE SAME CAR AND ITS LIKE YOU’RE IN MY EAR LIKE MY DAMN TÍO. ITS AWESOME! THANK YOU SO MUCH FOR CREATING. IT HAS HELPED OUT PLENTY. 💵 JDCALDERON CALIFORNIA

Well put together, that means I don't have to make one.

Did you notice a difference in acceleration/idling after changing them? Also what mileage did you change them?

Quick question, do you need high temp anti seize for the new plug installation? I think (could be mistaken) the silver anti seize is standard and copper anti seize is high temp. I wasn’t sure and thought I’d ask. Thanks for taking the time to post the video. Great job!

Bought my mom an 08 camry 2.4l 52k miles and it has a ruff idle once warmed up no check engine light but a maintnance required light. Doing : sparkplugs Oil + filter Air filter Cabin air filter What else should i change? Pcv valve? I apreciate the help thanks man

my clips cracked as well. wasn't too tough to replace them. dealer sells them for like 10 bucks each.

Sorry to ask. If you pause the video at 1:55 or 1:59 that thing that's above your engine that looks like a bar. What is it for?

Good video, thank you...

Why don't you just lift off all 4 ignition coils at once. That way you don't risk by breaking the tabs from the wires to the coil?

Great video!!!...

Thank you so much .

Great vid bro....so I'm guessing you dont have to gap the plugs right??

Great video, explaining every detail, but you didn't start the car for us, and explained what happens when you replace to new coil packs. I have a 2008 2.4 usa made with BWD E995 new coils. After starting the camry it will idle at 400rpms for about 3-5 minutes.. it feels like its going to stall and it will if you don't do a peddle push to for about 5 minutes. Then it goes to a nice 750 rpm and everything ok. I did also push on trip to reset dashboard. I Don't know if that matters? It's like the camry has to relearn to idol. Not a cert so I 🤷

Great job brother!✝

hi MrV2u, hope you can read this post, but I am ready to change plugs on my 2011 Camry Hybrid. I remember someone mentioned that after changing plugs, you have to disconnect the ECU fuse for a few minutes to reset the computer. Is that true? if yes, how to do it? thanks.

Very helpful, thanks a lot!

Thank you so much

Hi thanks any body can do or something go wrong and car does not start what I have to do

I have a 09 Camry 4cyl. 180k miles. Should I also replace the ignition coils with the spark plugs???

Thank you!

After I did this and did the idle relearn thing 3 different ways my 08 still idles rough and low. What could be the problem? I was told that it could be my idle sensor

Do u have to disconnect the battery before changing the spark plugs?

I recently decided to replace my spark plugs. same car and all that jazz. the idle was rough and would die when gas was pressed. put the old ones back in and now it is idling rough but driving (also rough). i used both lubricants properly just a different brand. any ideas on what couldve gone wrong? all wires were connected.

And the sparkplug socket, is that easy to find? And is 10mm sparkplug socket usually the size?

Appreciate you man! Especially for including the extra steps that Toyota’s shiesty ass added!

How do we know what the gapping is? I have a 2007 CAMRY

Hey Brutha. My car won’t start. I tested the starter, starter relay switch and crank shaft. They all seem to be working properly. Battery is good as well. When I turn the ignition, it doesn’t make a clicking noise. Any guess as to what may be wrong?

OR you could tighten the plugs with a torque wrench to the specified torque.

Ive got a 06 toyota camry car wont start after getting my spark plugs changed. How can i tell what was mixed up during the change? And do i only use factory made spark plugs from the dealership?

Would you ever unhook the battery before performing this?

Thanks allot bro

I brought a 2012 Toyota Camry brand new at the time ... 2018 now do I need to do tune up

At 1:10 you should leave the filter in place until you clean all the debris out of the dirty side of the box. You don't want any of that flying into the air inlet to the engine.

Why does triple a charge 189.00 for what 20 min of work. Good video now I can do my own

So Toyota wants 600 for a 20 min tune-up and 20 min oil change SMH. Thank you for this video bcuz I'll definitely be doing it myself

Yo I got the one v6 with the plantium cover thing do I have to remove that to get the back plugs? Thank u.

auto focus a bit shaky, but awesome video! thank you!

What is the manufacture mileage recommendation to change the plugs?

Thanks bro

Hey you could do this with a hybrid engine also ?

What is the gap supposed to be on these plugs

Hi, I checked that 2007 Camry use Denso spark plug SK20R11 (#3297). Why you use IK20 (#5304)? Thanks!

Great job sir I have shaken in my engine why?

I have a 07 with a oil consumption. Will a tune up work out for me?