2009 Honda Accord ABS Module Not Communicating - U0122 (ABS Module Already Replaced)

Рет қаралды 2,647

Күн бұрын

Join this channel to get access to perks:
/ @robertdotterer
Today we have a 2009 Honda Accord 2.4l that the customer complains the ABS, VSA and Brake light are on and it is not communicating. They said they replaced the abs module with a used one and still have the issue.
Codes:
U0122 - F CAN Malfunction (ECM / PCM - VSA Control Module Unit)
Tools Used:
Snap-on Zeus
www.snapon.com/EN/US/Diagnost...
How to make your own Leads, Probes, Lights, Attachments for an Oscilloscope or Multimeter (DIY)
• How to make your own L...
0:00 Intro
0:15 Overview
1:00 Full Code Scan
1:43 Looking At A Wiring Diagram
4:48 Testing Our Powers And Grounds
8:15 Checking The Inline Connector
8:40 We Got Power!
9:00 Checking For Communication
12:15 Rescanning The Car

Пікірлер: 15

@rafaelgarcia-xk7eu Ай бұрын

I had the same problem with an 08. Same plug disconnected. Bumper had been replaced . I Was thrown off by the vsa non vsa diagram. So I decided to check u tube and found you. Thanks.

@arthurfricchione8119 4 ай бұрын

Rob glad it turned out to be a relatively easy fix considering the rain. Thanks for sharing. 👍

@RobertDotterer 4 ай бұрын

Thanks for watching!

@bartscave 4 ай бұрын

Thanks for sharing, Especially in the rain! Dedication for sure!

@RobertDotterer 4 ай бұрын

It sure is!

@NothingButRelaxation Ай бұрын

Hi where can I get the schematics /wiring diagram for 2009 Honda accord 2.4?

@RobertDotterer 24 күн бұрын

Alldata, prodemand, Honda website, they all off them.

@DuaneDonaldson 4 ай бұрын

Diagram drawn backwards, not all diagrams are drawn from the same view, some are front probe pin side and some are back probe wire side. Thanks for the pin pushed out diag, cheers.

@RobertDotterer 3 ай бұрын

Yea but if you look at it in relation to the connector it's transposed.

@sterling808hi 4 ай бұрын

When you say the diagram is drawn backwards, are you saying they made a mistake or they purposely mirrored the diagram?

@RobertDotterer 4 ай бұрын

Yea, I see it a lot. Either the picture get mirrored or they label the pins mirrored. It can also be a translation issue because some manufactures label by harness side vs connector side.

@sterling808hi 4 ай бұрын

@@RobertDotterer interesting. Ive had this happen to me a few times but I thought I was reading it wrong. Thanks for your vids.

@RobertDotterer 4 ай бұрын

I'm glad you like them!