2009 Kawasaki Vulcan 900 Custom Stator Replacement Rick's Stator Install Music - Demilitarized_Zone By Ethan Meixsell Frame_of_Mine By Freedom Trail Studio Reckless_Shred By Biz Baz Studio
Пікірлер: 50
@priusman12342 ай бұрын
This is the best hack. I’ve seen nice job.
@shuacliff_70294 жыл бұрын
I know I'm the 20th person to say so but thank you so much for this effort. I am not naturally mechanically inclined but for the last few years I've been doing all my own maintenance out of necessity and prohibitive labor costs. It's been a journey. I'll be starting this project this weekend and your video has given definitely cleared up so many questions.
@EGYPT_REEF4 жыл бұрын
Thank you so much for sharing Man and taking from your time to show how is it done
@davidblyth65944 жыл бұрын
Thanks for the video. Cleared up a lot of things in my mind before I started tearing my bike apart
@TheMaximomex2 жыл бұрын
Thanks for the video and for posting all the torque specs for he bolts. It was very helpful. Thank you.
@midnightcowboyra4 жыл бұрын
Kawasaki made a new bolt with a hole through it for more oil flow to correct the stator failures. I ordered mine from bike bandit. The price has gone up its around $50 now. I found this on a forum from last year. Just thought I'd pass the info along. The new rotor bolt with the oil hole for Vulcan 900 from www.partzilla.com part # 92154-1357 and the washer that goes with it part # 92200-0220. $27.97 for the bolt and $3.91 for the washer. Shipping was $7.95. Total is $39.83.
@kyleheading48253 жыл бұрын
this was exceedingly useful thanks very much
@58gennaro4 жыл бұрын
Thanks so much for this. I plan on doing mine over the winter as a preventive. So only sealant on wire lead grommets and none on the gasket. OK.
@sillysquiddiveproductions91174 жыл бұрын
Gasket is installed dry
@patrickseynave50743 жыл бұрын
bravo merci du partage !
@nosilnikovv3091 Жыл бұрын
Благодарю за информацию. Очень помогло видео🤝
@jimbrown9634 жыл бұрын
Great video and info. Can I please know what type of saddlebags that you have on your bike?
@josepulidomarquez898 Жыл бұрын
Lo de cortar los cables para soltarlos con la instalación antigua, creo que sería mejor sacar los cables viejos y poner los que vienen en el estator
@zacsmithson85893 жыл бұрын
What wires on starter go to existing harness wires
@FRJ19822 ай бұрын
Nice video, my only question is as far as the leads... Do you pretty much connect any lead to any lead??
@DanielDiaz-cg6vk3 жыл бұрын
Do you have to solder on the wires or can you jutlst out a barrel connector?
@jamesw57132 жыл бұрын
Good video, I have the exact same 2009 model, 64k miles now and the battery does not charge on the bike anymore, having to charge it every day. I installed a power commander and new air system then I started getting this issue days later, probably coincidence. Replaced the regulator/rectifier still same problem so guessing I will have to do this and replace the stator. Under the seat is a connector socket coming from the stator, with the bike in idle im getting 9.5v, when reving it goes up to 12.4v, but when rev harder I get no voltage signal. Real pain in the @... I had a cooling fan issue for a few weeks and the bike was over heating a lot until I repaired the fan, is it possible this over heating cooked the stator? How has this Ricks stator performed as will buy one if ok?
@fernandovelazquez58483 ай бұрын
Hola soy fer Velázquez de Toluca,requiero el kit completo,estator,junta,tornillo del cigüeñal perforado,regulador rectificador,donde lo consigo, gracias
@mml12244 жыл бұрын
i have a v900 2012 class, is this the same instructions, and how much and where to find stator? what symptoms would you have in order 2replace it? thanks!
@theone2be334 жыл бұрын
Yes it's the same. The bikes are the same basically. Symptoms would be battery not charging. Use voltmeter to check battery. Should hold at 14 volts at 3,000rpms.
@midnightcowboyra4 жыл бұрын
did you use high temp solder or was it just normal 60/40?
@bolilloconcha3 жыл бұрын
saludos desde la cdmx muy interesantes tus videos ayudan mucho quisiera hacerte una pregunta podrias orientarme donde conseguir el tour pack y alforjas que tiene tu moto gracias
@acolmiztlisvn900bagger2 жыл бұрын
Esas bolsas que tiene de miran Como las de la marca Viking, Mira Mis videos yo tengo bolsas estiradas de Harley si te interesa..
@mml12244 жыл бұрын
great video, i didn't see what wires you spliced and how tho, did I miss it? Also, did u have2drain the oil to replace stator? thanks!!!
@jamesmcguckin62883 жыл бұрын
No need to drain the oil
@kingn00b992 жыл бұрын
@@jamesmcguckin6288 why not?
@theone2be334 жыл бұрын
Why did you replace stator? Battery not charging or just wanted better stator?
@datdotty4 жыл бұрын
Where did you buy the gasket from?
@kennethchichester57664 жыл бұрын
now if only someone can show a video on how the wire is run, i ordered a brand new stator, but apparently to run it i have to go behind the wheel thing and its a pain in the ass
@miguelsantiago23584 ай бұрын
Hello I'm about to do this job ..i have one question? Does it matter wich white wire you connect to the oem harness ..there are 3 white wires or doesn't matter wich white wire it is...thanks
@FRJ19822 ай бұрын
I just asked the same question a few minutes ago, hopefully we both get the answer sometime soon. That was something that was definitely questionable for me
@Thesaurcery4U2CАй бұрын
@@FRJ1982 It does not matter. It the same voltage coming out of each one.
@FRJ1982Ай бұрын
@@Thesaurcery4U2C thanks
@westwood74534 жыл бұрын
What do you do with the 3 shorter wires coming out of the stator?
@sillysquiddiveproductions91174 жыл бұрын
there is only 3 wires from the stator and they splice into the 3 white wires from the rectifier
@FRJ19826 ай бұрын
@@sillysquiddiveproductions9117 no specific order or certain wire to certain wire?
@TheOne-xw8ov2 жыл бұрын
You didn't have to pull the pulley out and belt?
@TheOne-xw8ov2 жыл бұрын
How's the Rick stator?
@russkujawski77 Жыл бұрын
Why cut the wires when a new stator comes with everything already attached.
@duroxkilo10 ай бұрын
the wires from the stator go the the rectifier and it's rather difficult to route them so most people leave the harness in place unless a short is detected... hope this helps
@kingn00b992 жыл бұрын
Do you have to drain the oil?
@pabloa.carreno70979 ай бұрын
Yes, first steep.
@solofat14 жыл бұрын
FYI you don’t need to remove the belt pulls cover
@robinbrandelАй бұрын
I would never cut the wires. If you take weight off the back wheel the pully comes off quite easily.
@loyalhearted610111 ай бұрын
Nice job but save yourself all that work with cutting wires and get a RMstator which is a direct plug and play
@loyalhearted610110 ай бұрын
You were better off leaving the music off 27 min of that noise will have my ears bleeding.