2010-2012 ford fusion radiator fan removal, replacement & dissection. mercury milan 2010-2011

Рет қаралды 61,113

6 жыл бұрын

in this video, I take out the fan & housing, open up the fan, inspect the interior of the motor, speculate about the little squealing noise that the fan makes when un-powered and moving slowly, and then put it all together again. This video is useful for people whose fans went bad. Note: just because the fan doesn't turn on, doesn't mean the fan is bad. Make sure that electricity is being sent to the wiring, and that the ground wire functions properly. electricity must circulate through the fan and return to the system ground, and do so without major electrical resistance, in order for the fan to function.

Пікірлер: 22

@zacm3840 3 жыл бұрын

sweet jeebus that step one spooked me and I thought the whole video would be that way

@brucef2112 Ай бұрын

Thanks for your vid. The first 6min. was exactly what I needed. My new one went back together a bit easier because upon removal I had left the transmission coolant lines in their CLIPS and just popped the CLIP from the shroud itself. One other thing there was was a strap/clip which secured the lower radiator hose to the shroud that needed to be removed. 2012 sel took about 1.5hr

@Jm-oi7wz 4 жыл бұрын

Those are transmission coolant lines, not AC lines. Not to confuse anybody, But very nice video.

@hannahautumnmadison2865 4 жыл бұрын

Great video!

@heathermishra Жыл бұрын

What happens if the clips just brake. It's like this dang car is soo fragile 😩. Me an my son got everything detached now just getting the fan out grrrr8 dang thing won't budge

@3rdgenfox Жыл бұрын

Like your vid bro easy to understand . Very thorough aswell mane!! Do you know the amp draw this particular fan has?? I'd really appreciate it!! Great vid🔥

@kellrontaylor3419 3 жыл бұрын

I have a 2011 ford fusion se and my fan module doesn't look like that, any tips? I need to replace it

@rogeriosartori3336 3 жыл бұрын

Hello, do you know the depth of the fan + shroud assemble? Can the front be trimmed to get the fan closer to tje radiator? Even if just a bit? Thanks

@JustinCrediblename 3 жыл бұрын

no idea

@generousman5888 11 ай бұрын

Bro you were on crack 2 years ago when you asked this stupid question 😂

@FindTheSeven Жыл бұрын

So there's no bolts holding the radiator fan in place? I'm thinking I need to replace my radiator fan as the high speed isn't kicking on at a stop to keep the engine cool and AC blowing cold.

@JustinCrediblename Жыл бұрын

if it were me, I'd see about finding a way to see the engine coolant temps first. I'm not familiar with that car, but it's possible that such a thing is normal? My old Honda CRX Si was designed with a pretty over-built radiator and the fan would rarely need to kick on.

@FindTheSeven Жыл бұрын

@@JustinCrediblename Thank you for your response and suggestion. I'm determined to figure this out. 💪