HIGH FLYING for Toyota Prado J150/Lexus GX460 2010-2024 Glossy Black Roof Rack Rails. www.amazon.com/HIGH-FLYING-20... Rubber Foam: www.homedepot.com/p/Frost-Kin... Center mount bolts: www.homedepot.com/p/Everbilt-...
Пікірлер: 64
@nickb16902 ай бұрын
Wow . A 20 minute video with no F bombs . Bob is getting soft on us . 😉 Looks great Bob.
@GXBOB2 ай бұрын
Because I saved it for the next video. Will come out shortly
@knoxcreole.2 ай бұрын
The white and black combo is such a clean f'n look
@juanshaftpatel74882 ай бұрын
OEM Moulding parts are ROOF DRIP SIDE FINISH, CENTER LEFT; ROOF DRIP SIDE FINISH, CENTER RIGHT, and Molding Roof Drip x2
@Wifigarage92 ай бұрын
Its beautiful 🍾🗽👍
@patrickmurphy660219 күн бұрын
Nice unit, nice install. One thing. Note on the part about hardware that has to be replaced. You recommended zinc hex bolts. That's fine if you live in dry climate. You may want to use stainless steel in northern climates. Stainless bolts are more expensive, but won't break bank. Also, a little lock-tite on those body connections would probably be good idea.
@GXBOB18 күн бұрын
@@patrickmurphy6602 thank you Patrick for the input.
@austinc6912 ай бұрын
Looks great!
@GXBOB2 ай бұрын
Thanks Austin. By the way , you’re in my next video.
@austinc6912 ай бұрын
@@GXBOB Am excited!
@GXBOB2 ай бұрын
I didn’t mean it in a good way. 😁
@austinc6912 ай бұрын
@@GXBOB haha even better!
@alexmack9562 ай бұрын
Sick intro
@GXBOB2 ай бұрын
I actually got up and started dancing with glow sticks
@michaelmika25682 ай бұрын
That's actually pretty slick, do you think they have matching crossbars?
@GXBOB2 ай бұрын
They do not. I am looking into black universal aftermarket crossbars.
@michaelireland57272 ай бұрын
Bob - I'm about to do this install your video is awesome. Did you. Use any silicone to help ensure of no water intrusion?
@GXBOB2 ай бұрын
I did not use silicone but instead decided to use rubber foam that would seal as a gasket. I also filled the water channel so there would be no room to hold water also.
@juanshaftpatel74882 ай бұрын
NICE.. looks great... i got mine in ... but im waiting on the oem moulding to fill in the channel to arrive before install... are you gonna get the black line fog lamp trim next?
@GXBOB2 ай бұрын
Ugh… stop making me spend more money.
@tkuhe7892 ай бұрын
do you have a link to the oem molding?
@GXBOB2 ай бұрын
@@tkuhe789I don’t. Send it over. Let me check it out.
@juanshaftpatel74882 ай бұрын
@@GXBOB wait til I tell you about the black chrome delete window trim I just installed… lol
@GXBOB2 ай бұрын
@@juanshaftpatel7488 i'm putting that on my list.
@Jabz786AFG2 ай бұрын
Hello's gxbob enjoy watching your videos,my 2017 gx fog light stopped working,won't turn on anymore and haven't been to an electrician any suggestions
@GXBOB2 ай бұрын
Cut the wires at your foglights and run to a battery source to see if it’s the lights or the power/ground. From there you can either replace the fogs or run a separate switch such as in my foglight video. I’m assuming you’ve already checked your fuses.
@Jabz786AFG2 ай бұрын
👌🏼❤️
@buklon76962 ай бұрын
Are you planning on doing any rock slider installation videos?
@GXBOB2 ай бұрын
Not any time soon. I have a laundry list of installs that will take me out to end of summer.
@cootholler222 ай бұрын
Can you buy the OEM rubber rain rail pieces that would fit where you did the weather stripping? Is there a Land Cruiser Prado part number to avoid Lexus up charge?
@GXBOB2 ай бұрын
i believe someone in the comments section is doing just that. I haven't tried but am interested in looking into it for an upgrade video. Thanks for asking.
@nickb1690Ай бұрын
Hey Bob have you thought about installing the Black Line window moulding to replace the factory chrome ones ?
@GXBOBАй бұрын
Yes I have. It’s on my list of things to do but I have quite a few stuff before I attack that one.
@nickb1690Ай бұрын
@@GXBOB Will be waiting.
@_willkim2 ай бұрын
Are you going to change navigation unit to 2022+ for your conversion? Look forward to it!
@GXBOB2 ай бұрын
Yes I am . I’m trying to gain enough courage to sell one kidney so I can afford it.
@_willkim2 ай бұрын
@@GXBOB lol. Looking forward to it with the money but from somewhere else.
@creepershaunt2 ай бұрын
Perfect timing as I have a set of rails to install sitting upstairs in a box. @GX*BOB when are you going to sell me your takeoff tail lights?
@GXBOB2 ай бұрын
did u buy aftermarket or oem rails? Just curious on the price difference. My tail lights? Not really in a hurry to let them go just yet.
@creepershaunt2 ай бұрын
@@GXBOB I bought the exact same HighFlying rails in February. I havent gotten a chance to put them on and I was worried about leaks so ive been procrastinating. One of my rear shells was cracked and I had to wait for a replacement too.
@creepershaunt2 ай бұрын
@@GXBOB I want red tails but I may end up buying the ones you put on a few weeks ago. I think i'll wait you out a little longer.
@GXBOB2 ай бұрын
@@creepershaunt If you take a look at install videos by the big names such as Prinsu, Sherpa, etc...you'll see that they attach their bolts no different than the High Flying ones. Except they used silicone on their bolts and did not fill the water channel void while i went and did rubber foam inserts and filled up the water channel with rubber foam so there are no sitting water. If the big names are able to do it with the minimal , i'm sure you'll be fine with High Flying with some added protection of your choice.
@creepershaunt2 ай бұрын
@@GXBOB i'm definately going to fill up the bolts with silicone but im hesitant about the foam vs just buying the trim gaskets from lexus, I think its $200 for all of them.
@galaktan_40382 ай бұрын
Нi Bob, again from Siberia. I don’t understand why did you do this. Old ones are as effective as new ones. Don't you think the new ones look like you're from Texas? Sorry for my English. You are awesome!
@GXBOB2 ай бұрын
I did it because my white SUV looks better with black trim. I am slowly converting the entire truck into a cleaner looking ride. My next project is a all black powder coated grill. Stay tuned for it.
@ravin7472 ай бұрын
They look good , but I’m going to keep my brushed aluminum rails
@GXBOB2 ай бұрын
To each their own. Especially ones who bought the GX in maroon color.
@ravin7472 ай бұрын
Mine is Knight armor, pearl
@TheyKnowWhoThisIs2 ай бұрын
Dude, why not just rattle can it at this point?
@GXBOB2 ай бұрын
Because we are not Nissan owners.
@tracykaetzel95172 ай бұрын
@@GXBOBdisagree as paint is paint whether you shake the can or someone else does. My issue with the Oem rails is lack of functionality with my kayak rack system. Would prefer an aftermarket black version like the 4Runner. My gx460 (named hi ho silver cause she came from Vegas) is silver so the oem rails and bars blend slightly better but black would match my wheels and ko2s
@TheyKnowWhoThisIs2 ай бұрын
@tracykaetzel9517 be aware disagreeing with Bobby is a Terrible idea. He is connected with the Assin mafia in Cali. He knows where to hide the bodies. Plus, he prays to his Vietnamese Jesus and you don't wanna mess with that...
@GXBOB2 ай бұрын
@@tracykaetzel9517 what size wheels and tires did u get and is your truck lifted or oem? Just curious.
@tracykaetzel95172 ай бұрын
Hi GXBob, my truck is stock, not lifted. The wheels are 17” without spacers. Running 265/70 17’s. We had to carefully drive home from the tire shop and do some trimming on the front wheel well plastic. But it looks nice and the KO2s are surprisingly quieter than expected.
@dml22052 ай бұрын
serve no purpose
@GXBOB2 ай бұрын
Neither does plasti dipping your emblems. Noooow you get it…🍷
@tkuhe7892 ай бұрын
oem rails/crossbars are too close to the roof and doesnt allow you to mount many roof boxes (yakima/thule) without scraping. these rails open it up to a lot of options for crossbars that now provide greater clearance.
@juanshaftpatel74882 ай бұрын
Neither does your left ball, but you still have two
@GXBOB2 ай бұрын
@@juanshaftpatel7488 We are definitely going to get along.
@tracykaetzel95172 ай бұрын
Would it be possible to show crossbars mounted to the new rails? I’m sure you can mount several types of lights on crossbars for future videos. The rails look very nice