Motive Power Bleeder: www.amazon.com/dp/B00O6FZJFG?... SMotive Power Bleeder: www.amazon.com/dp/B095JYYQ2P?... Toyota Lexus Adapter: www.amazon.com/dp/B09SPCSGP9?... Marinade Injector: www.amazon.com/dp/B0044FSQM6?...
Пікірлер: 30
@jislam1216 күн бұрын
Delivered it just when we needed 👍😀
@Shawn-ky2tw15 күн бұрын
Yes! Another great GX video by GX BOB IN DA HAUS!
@bernardaflores17206 күн бұрын
I wish you would have try the other pressure tester. The Motiva can be improved by drilling a small hole and installing a shredder valve from a tire.
@geminiguy217816 күн бұрын
Thanks for the information, I been putting this off bc I always have to ask someone to come over and pump the brake pedal.
@royyelda117414 күн бұрын
Great job 👍👍
@gipstetz672016 күн бұрын
Thanks for posting GxBob. Will be doing this soon.
@Unb3arablePain16 күн бұрын
Same, am just about to replace my brakes on all 4 axles and add extended SS braided lines. I've done plenty of brake flushes before but value Bob's input.
@user-ok2gy3re2v16 күн бұрын
Как всегда отличная подача материала! Вы молодец!
@GXBOB16 күн бұрын
I really wished I could read squiggly language. 😃
@juanshaftpatel748814 күн бұрын
the oem moulding pieces for the roof channels are 2x Molding Roof Drip 75555-60050, and 2x Lexus GX 460 Moulding. Roof drip side finish 75555-60030.. half the price if you order from japan... youtube wont let me comment onthe roof rack video
@TheCrosbyFiles14 күн бұрын
Great Video Bob - thanks for the laughs too.
@GXBOB14 күн бұрын
There’s nothing funny about a brake flush.
@ejagger15 күн бұрын
I've scheduled this weekend to do this very job (and replace pads and rotors, and index the rotors). Perfect timing for your video!
@GXBOB15 күн бұрын
Awesome. If you do have a second person to pump the brakes for you, I’d save the $50 from buying the pressure bleeder and $30 for the Lexus adapter. Just keep constant visual of your master cylinder from dropping too low. Good luck with your brake job.
@Wifigarage915 күн бұрын
🗽🗽🗽
@Bagom803 күн бұрын
Great and timely video. I ordered a Motive and the adapter. I did not want to cut off the end of my Motive just in case a family member that has a ford/gm wanted to borrow it for thier cars. I added a type T coupler to the Motive and replaced the 1/4 in coupler off the adapter. Lots of thread tape and it holds pressure and easy on/off. What are your thoughts on the dry bleeding method vs filling the motive?
@GXBOB3 күн бұрын
Why would you take a simple care free method and turn it into an anxiety hell hole? The dry method requires you to constantly check your fluid levels, remove and reinstall your adapter to refill the reservoir, only to constantly recheck your fluid levels again. The most you’re able to do are short bleeds in each line but i wouldn’t risk trying to flush out your lines for a brake system flush.
@rhome37575 күн бұрын
can it be done with Mityvac cavuum pump bleeder?
@derekrobles11913 күн бұрын
Hey Bob, how can I reach you to get a set of your Hayden trans cooler brackets??
@denisshavaliev184916 күн бұрын
On my GX I use techstream software to bleed the lines, it takes just 5 minutes. Bleeding procedure works automatically, for front line bleeding you don’t need to remove the wheels and open the valves as well. For back you just need to open the valves for couple of seconds with no wheels to be removed
@GXBOB16 күн бұрын
I’m shooting a video that requires light and camera angles. My videos are also aimed at folks that can’t afford techstream because we’ve been sucked dry by our exwife.
@RedDevilTuning16 күн бұрын
@@GXBOB Don't even need tech stream, just turn ignition to on and the brake pump will pump automatically.
@ravin74716 күн бұрын
Bob informing video, but I don’t have time to BLEED Haaaaa.
@GXBOB15 күн бұрын
Some folks bleed once a month
@EmpTy-kf2rq11 күн бұрын
😂 Perfect sh!t talking!
@GXBOB11 күн бұрын
Technically i'm protected under the American Turrets Act of 2024.
@seattleshon15 күн бұрын
Great video as always, Bob. Your girlfriend must be yelling at you for wearing a white shirt while working on your car.
@GXBOB15 күн бұрын
I wouldn’t worry about her yelling about the shirt , I’m more worried about her finding out I’m wearing her panties while shooting this vid. By the way, lace itches.
@ejagger15 күн бұрын
@@GXBOB Did you put them back in the drawer when you were done?
@GXBOB15 күн бұрын
@@ejagger It wouldn’t matter. She goes commando 24/7.