Easy 1 PERSON Install: The New 4Runner PRINSU PRO Roof Rack

Рет қаралды 7,719

Күн бұрын

Learn how to install the New Prinsu Pro Roof Rack on the 4Runner easily, by yourself. Yes, you can do this with only 1 person.
‪@PrinsuRacks‬
In This Video:
Prinsu Pro Roof Rack for 5th Gen 4Runner
prinsu.com/product/prinsu-pro...
*Auto Trim Removal Tool
amzn.to/3w2YTZ4
*Current Mods and Equipment on the 5th Gen:
Rival Skid Plates Full Kit:
Use Discount Code NEW5OFF for 5% off your order
underdogmotorsports.com/produ...
*Roller Seat Powerbuilt:
amzn.to/3uyHiaA
Roadanvi Head Unit 2014-2019 4Runner:
amzn.to/3F8nRYo
Auxbeam 8 Gang Switch Panel Kit
amzn.to/3FcJJ5I
Power Fuse Block Shelf Bracket (silver)
amzn.to/3i4ij9k
Lasfit Ditch Lights for the 5th Gen 4Runner
lddy.no/1dioq
HyperDip Wheel Kit:
amzn.to/3LHnNR5
Lamin-X 4Runner Fog Light Cover (2014-2022)
Order directly from Lamin-X with the link below and receive a 15% discount
laminx.refr.cc/azoverland
AUTOBOTS Tow Hitch Receiver
amzn.to/385BhY2
Stay There 3'' × 20ft Heavy Duty Tow Strap Recovery Kit
amzn.to/3N4fW0j
Voodonala for 4Runner Side Door Storage Box
amzn.to/3LH8OX8
JDMCAR Compatible with Center Console Organizer
amzn.to/3vV0Oey
PAVONI Car Inflatable Air Camping Mattress Pad
amzn.to/3s7Pk6n
Qualizzi Protective Sunscreen
amzn.to/3LHpRsj
YITAMOTOR Floor Mats
amzn.to/3kBg5fq
LFD Rock Sliders:
lfdoffroad.com/collections/5t...
Canvasback Cargo Protector
www.canvasback.com/products/t...
Westcott Deigns Ladder
westcottdesigns.net/product/t...
Video Equipment Used:
Pixel 6 Pro Phone
amzn.to/3Fk4BGD
GoPro HERO7 Black
amzn.to/3ycy9o9
Rode Wireless Go - Compact Wireless Microphone
amzn.to/39INhQ1
Tripod Mount Accessory Kits
amzn.to/3vIfK0L
*this channel may receive a small commission when ordering from certain links. Thank you for your support

Пікірлер: 54

@TheMonaHeecanOutdoors 5 ай бұрын

Looks great! cant wait to see what's to come

@AZOverland2017 5 ай бұрын

Thank you. I have a big change coming this month and that will result in several more

@smithncompany 2 ай бұрын

Thanks for a great install video. Super helpful. I ended up building the rack on the ground and lifting it onto the rig. But the details you provided were super helpful whichever way someone chooses to go with it.

@AZOverland2017 2 ай бұрын

Glad it worked out well for you. Yes, assembling on the ground is great if you have someone to help get it up there. It becomes especially challenging with short people and a lift vehicle 😆

@westernefficientenergy902 5 ай бұрын

Thank you for explaining the difference between this one and their other model.

@AZOverland2017 5 ай бұрын

Thanks for watching

@Grimdegn 5 ай бұрын

Looks great. Love the weight capacity

@AZOverland2017 5 ай бұрын

It definitely allows for more mounting options. RTT or whatever

@monmouthunitedsc5854 5 ай бұрын

Been eyeballing the this new version. Definitely seems worth the price.

@AZOverland2017 5 ай бұрын

I purchased it on Black Friday. I originally bought the regular version and my brother convinced me to go with the Pro. Glad I did.

@cw50must 5 ай бұрын

Looks good

@AZOverland2017 5 ай бұрын

Thank you!

@jerrylunday9977 4 ай бұрын

Great video! First time watching your channel. I just received my pro rack today for my Tacoma and I too, will be installing it by myself. Your video provided great insight to the process since nothing is yet available on the Prinsu website. I am curious, however, as to what possible install steps you might do differently? TIA

@AZOverland2017 3 ай бұрын

Thanks for your comment. I think I would do it very similarly. If I had to do it again. I would probably add more of the silicone in and around the bolts. I think it'll be easier to install on a Tacoma since it's not as long as the 4Runner roof. You might want to consider when installing the inner rails on the outer rails to clip one side with a spring clamp that'll hold it in place while putting a bolt through the other side. That was probably the hardest part for me. Is putting the two rails together with how long they were? I had to stretch to get a bolt in but very doable either way. Good luck with the install. Let me know if you have any questions along the way. You can always email me if you need more details brothersadventuresllc@gmail.com

@InGratitudeIam 5 ай бұрын

To prevent water intrusion, I was told to put RTV on everything connecting the rack to the roof. So, where the brackets meet the washers and spacers, all around the bolts (it makes a great anti-seize), both sides of the metal and rubber washers, the spacers - top, bottom, inside, the bottom of the channel around the openings... Water can travel in the most annoying ways possible especially at highway speeds. The other thing I was told concerning those front feet that don't bolt into the roof, you need to lift the rack a bit (1/4" to 3/8") with towels acting as shims, set the feet down on the roof and then remove the towels so that there is more downward pressure on the front of the rack. At highway speeds, the rack will want to lift, and this step helps to keep the rack firmly planted on the roof. Otherwise, the front portion of the rack can flutter and cause damage to the paint as well as make an annoying noise. YMMV.

@AZOverland2017 5 ай бұрын

I did a similar method with the front brackets. I installed the bolts just before snug and set my gun up on them. I shoved the back of my hand under the side rail at the very front and forced it up with my fingers (I have super hero-like finger strength) Then, I moved the bracket down with the allen head socket on the gun and tightened the bolts. I have absolutely zero movement after testing. With the RTV, I overfilled when I injected it down. So the only places I don't really have the RTV is under the washers on top of the bracket and on the base where the rubber weatherstripping is cut away for the "feet". I will definitely be adding more at the bracket feet location. I'm not convinced I really need it under the top washers but if installing again it certainly couldn't hurt. At this point I don't want to disturb the cured RTV. Thanks for the feedback, and hopefully others installing will read you comment as I did not include that in the video.

@InGratitudeIam 5 ай бұрын

@@AZOverland2017 I did not know that. Excellent idea!

@thesecondhalf5823 5 ай бұрын

another great install vid. All said and done, would you install it again that way?

@AZOverland2017 5 ай бұрын

Sure would. There a a few things I'd change, but the overall install went smoothly. Of course filming it took an extra few hours...

@MrFreddarama 3 ай бұрын

I'm looking to install 3/8 antenna mounts on each side of the rack. Do they sell these for this rack? If so would the rack make a solid connection to ground or are ground straps required? Thankd

@AZOverland2017 3 ай бұрын

Good questions. I would contact the CBI directly with those questions. The mounting locations an options ae so wide that even if the antenna mounts are not made specifically, I would think you can certainly find hardware to make it work

@juystafanreview2532 27 күн бұрын

In case anyone is wondering. The Torque for the down bolts are 4 ft lb.

@AZOverland2017 27 күн бұрын

Thank you

@InGratitudeIam 5 ай бұрын

Nice rack! You make DIY look easy and fun. This version is a definite improvement over their previous version. It certainly looks better than what you had before. I think the dynamic load capacity of the roof itself is about one-half of what your new rack can handle, but there are no official specs required by NHTSA so it's hard to say. Regardless, no more jumping sand dunes for you, young man! On a more serious note, you might consider installing the additional crossmember. Certain tents and other equipment require a little more support and you aren't losing anything by having it installed. So, welcome to "The Dark Side." There's no turning back, Anthony! Before too long, I'm sure you'll need to regear your front and rear diffs. That's the way 4Runner ownership goes. It's an insidious, but wonderful affliction! :))

@AZOverland2017 5 ай бұрын

I actually have 8 of the 9 crossbars in now. I had to save a little weight by not installing the 9th:) The re-gear is moving very high on my list especially after hat I just did after the rack install...

@InGratitudeIam 5 ай бұрын

@@AZOverland2017 I didn't catch what the weight of this rack is. You certainly have an excellent one now!

@AZOverland2017 5 ай бұрын

@@InGratitudeIam About 70 lbs

@daveshear 4 ай бұрын

What ladder do you have? Thanks for the video!

@AZOverland2017 4 ай бұрын

It's the Westcott Designs. I did a video on the install for that as well.

@M.L.M.L.M.L 11 күн бұрын

Where do you get trim to protect the paint on the underside of the deflector?

@AZOverland2017 11 күн бұрын

It was included with the rack

@CaptainSkidmark74 3 ай бұрын

I dig the rack, but wondering why the extrusion behind the wind deflector is silver anodized and not black like the rest?

@AZOverland2017 3 ай бұрын

That's a great question that I wish I knew. It's not visually noticeable once installed, but yes, why silver?

@CaptainSkidmark74 3 ай бұрын

I agree it does look concealed. Great video, sub'd!

@mryikes9602 5 ай бұрын

What’s with the double sided tape? Is that going to peel off after a while?

@AZOverland2017 5 ай бұрын

I'm not concerned about it. There are different strengths for this sort of tape. This is on the stronger end of that range. In addition, if you are work the side rails up in a position when tightening the front bracket bolts then lower the rails down, it sits VERY tight on the bracket and tape. There is zero movement up front.

@jakemurphy2092 4 ай бұрын

Can you open the back hatch of the 4runner without the roof rack interfering?

@AZOverland2017 4 ай бұрын

Yes. Right now my Westcott ladder does hit the left storage box at a certain height but I just need to slide them forward a little and there wont be an issue.

@smithncompany 2 ай бұрын

It actually clearances better than my original Prinsu rack. My hatch slightly bumped the old rack on full open. Now it's free and clear.

@tonyhernandez3433 4 ай бұрын

Can moonroof still be up and not hit on a 2024 4Runner ?

@AZOverland2017 4 ай бұрын

I don't have an accurate answer for that. I would contact them to get a definitive answer.

@mtalha909 3 ай бұрын

How’s the wind noise on this pro model?

@AZOverland2017 3 ай бұрын

Very minimal. I don't really hear it over the sound of my tires😁

@ebikesandstuff1475 5 ай бұрын

👏👏

@AZOverland2017 5 ай бұрын

🙏

@joshlucio4914 4 ай бұрын

About how long did it take you to install by yourself ?

@AZOverland2017 4 ай бұрын

If I wasn't filming, it would have taken about 2 hours.

@lokithebelgianmalinois2959 5 ай бұрын

Can I go up there?

@AZOverland2017 5 ай бұрын

I have to build a platform up there for pups to watch the stars.

@LastToFail 4 ай бұрын

Are you on IG? i did a quick search but couldnt find you! But i swear i think i passed you about 2 weeks back while driving hahah

@AZOverland2017 4 ай бұрын

Yes. @AZOverlsnd2021 I'm not very active there. Whereabouts did you think you saw me?

@seanisajerk83 3 ай бұрын

I ordered one but none of the brackets are marked in anyway so I’m trying to figure out which one is which

@AZOverland2017 3 ай бұрын

Is it definitely the PRO version you bought? If so, the numbers should be laser cut in the brackets