2010 GMC Buick Enclave Spark Plugs Replacement 3.6. How To replace or change the spark plugs on a 2010 GMC Buick Enclave
Пікірлер: 130
@ralla525 жыл бұрын
Thanks a lot. Received quotes in the $400 neighborhood. Haven't changed plugs in probably 40 years. Watching your video convinced me to set up an appointment to have it done. :)
@RescueMoversDFW5 жыл бұрын
You're welcome 👍👍
@Rod01-s2k6 жыл бұрын
Thanks man. Your video really helped me. I just bought my 2010 Enclave yesterday I couldn't figure out how I would be able to change those spark plugs without moving the engine. Lol. Now I see to just move the intake manifold. Thank u.
@RescueMoversDFW6 жыл бұрын
Little3160 you're welcome 👍👍
@laurarochelle11 ай бұрын
Thank you so much I was able to change mine watching your video
@NumberOneWithACoke4 жыл бұрын
Thank you Daniel for spark plug video. You are saving a lot of people a lot of money. Hope all is going good. Have a great day!
@patrickskahill65305 жыл бұрын
Just bought all the parts and will be doing this myself this weekend. '09 Enclave. Thank you!
@RescueMoversDFW5 жыл бұрын
You're welcome and good luck 💪💪
@patrickskahill65305 жыл бұрын
All went well, and no more stutter under load. Thanks again!
@marqueshaynes87805 жыл бұрын
@@patrickskahill6530 About to do the same on the same year and make. How long did it take you?
@100fredkrueger5 жыл бұрын
I’m doing my wife’s ‘08 this weekend. I hope it goes good. I have changed struts on the front and rear, outer tie rods, and my breaks. Breaks are easy though. My local mechanic told me to change them myself so it would save me money.
@Mark-yy2py Жыл бұрын
Ditto! Just replacing one plug and coil
@mocowboy69662 жыл бұрын
Your videos are great. I love the detail you go into. Thank you very much.
@user-mn8vw8hw5c Жыл бұрын
Thank you and I have confidence to do it with my 2009 Enclave I bought 6 months ago
@thezone39465 жыл бұрын
Thanks guys! Great information! Made my job easier -09 Buick Enclave
@RescueMoversDFW5 жыл бұрын
you're welcome 😉
@cityslicker853 жыл бұрын
Yes thank u
@unlisted7735 жыл бұрын
Thank you very much for doing this. I was able to change the plugs and gasket in my 2010 Chevy Traverse. This sure helped a lot and I appreciate you doing it. Saved me some $$$!!!
@kaysonmalakai37113 жыл бұрын
I guess Im asking the wrong place but does anyone know of a tool to log back into an instagram account? I was dumb forgot the account password. I would appreciate any tips you can give me.
@lorenzozane93953 жыл бұрын
@Kayson Malakai instablaster =)
@youdagoob4 жыл бұрын
This is better than the other video.
@gregsimopoulos55096 жыл бұрын
Great video Daniel... Going to give it a go tomorrow... Feeling more confident after watching your video...!
@RescueMoversDFW6 жыл бұрын
Greg Simopoulos 👍👍
@NumberOneWithACoke6 жыл бұрын
Thank you Daniel for yet another great video.
@RescueMoversDFW6 жыл бұрын
thank you for your great words:)
@dahlwilliams1803 жыл бұрын
Thanx! Nicely done from start to finish.
@anthonyczernek44693 жыл бұрын
Says he not a pro but is using snap on and matco tools, great video
@edmamon46552 жыл бұрын
I was thinking the same thing when I saw the Snap-On torque wrench. Maybe he had a mechanic buddy overseeing him???? However, the spark plug socket was missing magnet or rubber boot to hold plug so maybe just borrowed the tools?
@Sam-cf4qp6 жыл бұрын
Daniel thank you so so much for putting out this detailed video. I was able to change spark plugs and ignition coil on my 2011 Buick enclave cxl with approx 134000 miles. Daniel i would be more happy to talk to you over the phone or exchange email with you if you do not mind. It's hard to put some things in words for the grateful you have shown by putting out this and other video for this vehicle
@RescueMoversDFW6 жыл бұрын
Samuel Jani thank you for your comment and my email rescuemovingservices@gmail.com. 👍👍👍
@RikRamJamzRamJamz4 жыл бұрын
thanks im going to attempt this july 11 2020 2009 buick enclave very doable great information
@lynelle14 жыл бұрын
Thank you so much I followed your video and it came out perfect
@jojodiver87065 жыл бұрын
Thank you Daniel. I appreciate you taking the time to make this video. I have to do this on my step daughters Enclave.
@RescueMoversDFW5 жыл бұрын
you're welcome :)
@deborahowens87742 жыл бұрын
Great job, you save alot money
@angelf98003 жыл бұрын
Thanks for the videos you make I owe you a beer or 2 if I ever see you 😀
@cna320014 жыл бұрын
Fantastic video! Great job
@EASTCAMDENRD Жыл бұрын
Great video!! Great job!!!
@lacarmen7175 жыл бұрын
Thank you. Your video was so easy to follow.
@LorenzO-3052 жыл бұрын
Thanks !! Man
@timvandenbrink44612 жыл бұрын
Excellent. Thank you!
@Losschris15 жыл бұрын
Great video thank you. Shop wanted 475 to do this.
@thaprayza6 жыл бұрын
Thanks for the video very detailed and informative. How much lbs to tighten the manifold?
@RescueMoversDFW6 жыл бұрын
Tha PrayZa I think 89 in-lbs
@davemiller39194 жыл бұрын
Great job. Thank You Will do same on 2011
@rham49003 жыл бұрын
What were your Torque settings for intake and Throttle body. And thank you for your video. Very informative 👏
@db134016 жыл бұрын
Also great video thanks
@RescueMoversDFW6 жыл бұрын
db d you're welcome 😁👍
@miguelmartinez-kr7ps5 жыл бұрын
This is the same as the buick lacrosse. Except the engines are mounted reverse of each other. So you can do the front 3(rear 3 on the enclave) easily
@theburningred016 жыл бұрын
Thanks for the video! Good info! Did you have any trouble reusing the intake gasket? Do you recommend a new gasket when changing the plugs?
@RescueMoversDFW6 жыл бұрын
Yes, definitely change the gasket and thank you for watching my video :)
@GerardoPerez-rl9il3 жыл бұрын
When you put the new spark plus you recommend change the gasket to
@RescueMoversDFW3 жыл бұрын
Not necessarily
@GerardoPerez-rl9il3 жыл бұрын
@@RescueMoversDFW tank you
@geopowless34524 жыл бұрын
There’s no need to remove throttle body
@ACHG112466 жыл бұрын
I don't know if it's just GM or what, but they seem to make it harder for the Do-It-Yourself kind of mechanic to work on their vehicles. Spark plugs used to be out in the open. Now you have to take off the intake manifold? I was going to replace the fuel filter and transmission fluid filter, but I couldn't because the fuel filter is integrated with the fuel pump and the transmission filter is buried deep in the transmission and only replaced during a full service. Ridiculous. But thanks for posting the video!
@RescueMoversDFW6 жыл бұрын
ACHG11246 thank you for your comment and I agree with you with all this .
@bruceculp32315 жыл бұрын
I agree! Thanks Daniel!
@100fredkrueger5 жыл бұрын
Yeah these companies know exactly what they are doing. They don’t want us fixing our own stuff. They want us to take it to the dealer. I feel sorry for mechanics that have to work on these modern vehicles. It is so expensive these days because of how long it takes to do stuff.
@rgbalverde5 жыл бұрын
Buen video hermano, y muy útil. Saludos!
@bruceculp32315 жыл бұрын
Nice! Thanks!
@RescueMoversDFW5 жыл бұрын
you're welcome
@cynthiaramos35944 жыл бұрын
What size rubber hose fits around the spark plug for screwing in? Does it matter how tight I screw them in? I don't have the strength of a man.
@alexb88236 жыл бұрын
Those 3 prongs on the top of the manifold are for the plastic cover.
@RescueMoversDFW6 жыл бұрын
Alex Bothwell that's correct
@jd51796 жыл бұрын
thanx for the video!!
@RescueMoversDFW6 жыл бұрын
jd5179 you're welcome: )
@gaylonsteenburghsteenburgh74685 жыл бұрын
very good.
@RescueMoversDFW5 жыл бұрын
thank you!!
@estlhm8054 жыл бұрын
Great video great information!
@markn31365 жыл бұрын
Your speak plug socket should have a rubber boot inside to hold the spark plug as u pull it out
@mrnapolean13 жыл бұрын
All mine where solid black. Whoever the original ower of the 09 Traverse I have (Same motor) never changed the plugs. Car has 138K on it.
@shadoww-px1wl5 жыл бұрын
Thanks for the informativ vid!.. Can u list all the tools and grease u use.thanks
@RescueMoversDFW5 жыл бұрын
sorry, i can't remembered
@hfontanez835 жыл бұрын
Thanks for the video mate! Is it necessary to replace the manifold gasket?
@starmusics3152 жыл бұрын
Útil este vídeo
@sheenaaarae3 жыл бұрын
Hey I replaced my spark plugs on my 2010 Buick enclave and now its showing 2 misfires and it wasnt showing no misfire before I replaced them. What should I do?
@RescueMoversDFW3 жыл бұрын
Make sure wires are connected correctly z you probably have them and the wrong position
@migzchevy225 жыл бұрын
Where are the fuel injectors from this motor?
@jc100317062 жыл бұрын
Funciona para una 2014??
@markn31365 жыл бұрын
Main thing is don’t cross thread the spark plug!!!!
@595elgato6 жыл бұрын
Excelente video Daniel.cual es el cilindro 6?
@RescueMoversDFW6 жыл бұрын
mauricio Vazquez despues te digo cuando mire el manual que no me acuerdo
@595elgato6 жыл бұрын
Daniel Rescue Movers ok
@trumphaterforever51655 жыл бұрын
Muchas gracias por el video 🤙🏻
@julioalejandrochaconescobe131 Жыл бұрын
Sorry, i have questions about. What calibration do you have the spark plugs? Do you have to program the throttle body again after cleaning it?
@MarkSmith-js2pu Жыл бұрын
.043 inch gap on the plugs. They came pre-gapped and he just checked them. I cleaned my 2012 Acadia throttle body and as I recall the check engine light came on for a few cycles and then never came back on. That was about 3 yrs and 15,000 miles ago.
@LorenzO-3052 жыл бұрын
17:25 What type torque is that ?
@hernansanchez8676 жыл бұрын
Do you have to unplug the battery before doing any of this?
@RescueMovingServices6 жыл бұрын
Hernan Sanchez , you don't have too. But it's on the recommended it
@richardlongoria97246 жыл бұрын
Daniel I have the same vehicle what book did you go by name and where can I buy one great job? Richard San Antonio TX
@RescueMoversDFW6 жыл бұрын
Richard Longoria thanks for you comment, just go to AutoZone auto parts and ask them for the service manual for a 2010 buick enclave. I bought mine for I think $35dls. Good luck.
@darkhaunterpan5 жыл бұрын
Oye, yo tengo una 2008 enclave, me sale el check en el tablero y me arroja el P0330 y P0430, como lo soluciono? y la puerta de la cajuela como que quiere abrir pero no, si se oye el ruidito que como que quiere abrir pero simplemten no la abre, manual si.
@gamaerick0006 жыл бұрын
Do you know what needs to be fixed if my factory remote start will no longer work?
@RescueMoversDFW6 жыл бұрын
im sorry , i don't
@Tay2dabay5 жыл бұрын
U can youtube how to reset it. Its really easy. I found that it will not work if your chk engine light is on. If it was previously on this may be the reason for the need to reset.
@100fredkrueger5 жыл бұрын
Tatianna Wally that’s right on the check engine light. Mine came on and it wouldn’t work. Turned the light off and it started working again.
@mariomedina66262 жыл бұрын
If you have a check engine light on it wont work till you fix the issue if you clear the codes it will work
@pacheelmuchachoalegre71376 жыл бұрын
A homie where is the camshaft sensor located let me know as soon as possible please thank you.
@RescueMoversDFW6 жыл бұрын
sup homie here's the link taht shows wher's the camshaft sensor hopefully will work for you. Thanks www.justanswer.com/buick/4w248-buick-enclave-cxl-replace-crankshaft-sensor.html
@starmusics3152 жыл бұрын
Es barato la mecánica deste buick enclave, me interesó comprar
@RescueMoversDFW2 жыл бұрын
No la recomiendo
@bikelife_gus3193 жыл бұрын
Is this the same for 2013 Buick Enclave?
@fbowie214 жыл бұрын
how long did it take and how many miles were on the truck
@clintfrederick7747 Жыл бұрын
Which is the number 3 cylinder
@juliansalcedo13944 жыл бұрын
Comprate un socket para bujias q sea magnetico y asi no pasa nada
@eugenew67173 ай бұрын
Which is bank 2,,,I got po302 code
@eugenew67173 ай бұрын
86l s on bolts??
@ea48054 жыл бұрын
where is cylinder number 1?
@justina5882 жыл бұрын
What book is that?
@eugenew67173 ай бұрын
Haynes Manuel
@db134016 жыл бұрын
Where did you find your manual?
@markn31364 жыл бұрын
Your 5/8 speak plug socket should have a rubber boot inside it to hold it to come up. If not go buy a new one $5
@tonyreyes32945 жыл бұрын
What side is bank 1 o2 sensor?
@armandomirelez6 жыл бұрын
Ouwee! Looks like alot of work 😨
@RescueMoversDFW6 жыл бұрын
armando mirelez it is a lot of work 😥😥😥
@armandomirelez6 жыл бұрын
Lol where do you live
@RescueMoversDFW6 жыл бұрын
Dallas tx
@armandomirelez6 жыл бұрын
I live in mesquite! How much would you charge to do my 2011 enclave? ☺
@RescueMoversDFW6 жыл бұрын
armando mirelez yo estoy en Lewisville hay diras
@mariomedina66262 жыл бұрын
You know you don't have to take off none of that you can just fit your hands with an extension I do it all the time on mine Lol
@harrynj223 жыл бұрын
What size hose?
@Mr.Blu35 Жыл бұрын
Next time explain that you need an extended 5/8 not just a 5/8 socket 🤦🏽♂️. Back to the store I go 😡
@joshgelo75285 жыл бұрын
Dont you need to disconnect the battery while doing this? Asking for a friend?
@thegreatkingscorpion5 жыл бұрын
When working on any part of the engine definitely dealing with electrical connections it is always best and smart to unplug the negative connection on the battery better safe than sorry
@deborahhawes95252 жыл бұрын
979y
@tonyl1952 жыл бұрын
Lmmfao. All y'all who post vidz of doing plugs. Y'all do to much work because you don't gotta remove anything but the evap purge valve. Them you can do plugs with no issue or removal of anything