2012 Chevrolet Camaro 3.6 water pump replacement

No video

2012 Chevrolet Camaro 3.6 water pump replacement

Рет қаралды 17,966

Күн бұрын

thank you for watching!!!!!
If this video was helpful to you and if you would like to place a donation, here is my Venmo and PayPal information. Or I would really appreciate it if you could share my KZfaq channel on your social media. Links will be on the bottom.
#chevycamaro #waterpump #jabothemechanic
venmo.com/code...
www.paypal.me/...

Пікірлер: 30

@JR-ew6kt Жыл бұрын

Great video! Every shop wanted $550 to $650. Bought the part for $85 and did it in all in 30 min....thk you!!!!!

@mikelewis2287 Жыл бұрын

Very impressed with how well done this video is considering he did it by himself and mostly 1 handed, and still made it look easy, not to mention he covers every detail i was curious about.

@syedraabi9467 Жыл бұрын

The best procedure by procedure video I've seen. Good job bro

@Luhrudybihh Жыл бұрын

Love the video, explained it very well, now ima change mine 😂 very much appreciated

@jakemartinez2948 6 ай бұрын

Where is the power steering replacement video at!!!!

@rbotell02 2 жыл бұрын

Excellent video, everything well explained.

@Ziggyzig213 5 ай бұрын

Mines good but this video was great and now I’m going to change it just because of how great this video was!

@getrealpeople9347 Жыл бұрын

Great video . We’ll explained.. thanks 🙏🏻

@HaloGTMaster94 8 ай бұрын

Do a video on the thermostat housing? 😊

@camarobossman 2 жыл бұрын

Great video boss I think this is a 2010 or a 2011 they revised the steering wheel and instrument cluster in 2012 they also added some extra ponies to the 2012 model laugh out loud

@Sweatyz 2 жыл бұрын

Yup lfx on 2012+

@lukeedmonds9245 2 жыл бұрын

No they didn't add. They under guesstimate the 10 and 11 with no official test done those years.

@JohnSmith-lf8kg 2 жыл бұрын

@@lukeedmonds9245 not only that but the messed up thermostat placement and dirty air with oil going back on top the manifold. Not burning that crap like it should.

@SSCamaro_Sno 2 жыл бұрын

That’s looks real easy I’ll be doing mine real soon

@themoneymatt3429 2 жыл бұрын

Me mf too, doing mine Thursday. Let’s hope this shit easy.

@DopeNinjaGaming_ Жыл бұрын

If I do a water pump and thermostat replacement will it help 10 Camaro v6 stop overheating. I noticed that when I drive and step on it to get to speed or at idle it seems to overheat. And my oil temp gauge and my coolant temp gauge go up and pass the half way line. And it starts overheating to like 240 degrees? If you can please let me know that’d be great. Thanks

@maxkannur._.5835 6 ай бұрын

I have the same problem, did this fix your situation?

@DopeNinjaGaming_ 6 ай бұрын

@@maxkannur._.5835 haven’t fixed this issue yet actually. But I’ll be taking it to the a mechanic to diagnose it. I’m thinking it’s a stuck closed thermostat because I have no leaks or smoke coming from my engine bay. Hope you fix your problem too. It sucks having a car that overheats

@atlas8593 4 ай бұрын

let me know if you figure it out , im dealing with the same issue. I always keep my eye on the coolant temp module and it raises until im eventually advised to idle engine. the temp consistently raises at 2Krpm+ and while idle.

@justinwashington5077 2 жыл бұрын

Great video Brother!

@r.rod.4894 5 ай бұрын

When I took off the original, there was also an aluminum gasket with the black gasket. Is it recommended to install the new water pump with original aluminum gasket also?

@leedavis5903 5 ай бұрын

My heat stop blowing hot air it blows cold what should I do I got 2015 camaro v6

@jsjs-qw3ss 6 ай бұрын

I’m about to replace my 2013, is it the same procedure or is their a slits different?

@SSCamaro_Sno 11 ай бұрын

So you don’t have to use any silicone between the gasket & water pump?

@lukeedmonds9245 2 жыл бұрын

Is there a bleeder screw on this?

@JohnSmith-lf8kg 2 жыл бұрын

Can leaking also come from the bottom crank pulley itself or bottom area? I think mine is down there. Unless its from the water pump, but the coolant makes it some how look like its coming from the bottom crank pulley area.