How to replace the driver side front inner axle boot on a 2012 Nissan Rogue. 2008 to 2012 Nissan Rogue left front CV boot replacement. DIY. Bring old batteries back to life: letsgetit.vip/battery/
Пікірлер: 183
@nathanrocks25629 ай бұрын
Even though this video is several years old, it helped me immensely in 2023, working on the 2011 Rogue. Thank you, friend! This is great quality content!
@dominiki758111 ай бұрын
This is one of the best car repair video i have ever watched. I give it a 5 star rating.
@AnthonyJones-vk6xq4 жыл бұрын
Excellent video my friend, all i see is videos of guys replacing the entire driveshaft assembly, at nearly 300Euros here in France why would i do that when its only ONE split rubber CV boot that needs changing at 20Euros........ Saved my life man, much respect from France........i'll buy you a beer if you ever visit !!!
@Autofixpals4 жыл бұрын
Thanks man. You can share the video as an appreciation. Glad it helped
@florianreid8467 Жыл бұрын
Thank-you for a very detailed tutorial. Some of the little comments you made will save hours of grief.
@BillSW Жыл бұрын
Pushing in the rotor is the best advice I've seen!
@alexcastaneda87132 жыл бұрын
Thank you 🙏🏼 I spend 50 on the repair kit and less than 50 on tools I didn’t have, you saved me around 500 bucks on repairs
@jchock7503 Жыл бұрын
This is the first video I have seen on KZfaq changing the inner cv boot by partially removing the CV axle. Leaving the transmission still plug up with part of cv axle prevents the transmission oil from spilling out. An innovative move but with less working space when installing back the CV axle.
@bighurtt4 жыл бұрын
Wow! You, sir, are a saint. I cannot believe the amount of attention to detail and quality camera work you put into this video. So clear and well explained. If you ever get tired of working on cars you can be a professional instructional video producer or something. Wow. Awesome work. Thanks so much for making this. My front right inner CV axle boot exploded today on my 2011 Rogue exactly like what happened in this video. I don't have the tools or lift equipment to be able to do it myself but now I know exactly what needs to be done and I'll know if anybody is trying to rip me off or feed me some BS. Thanks so much! You just gained a new subscriber :)
@Autofixpals4 жыл бұрын
Your welcome and thank you Alex.
@mercedesperez31676 жыл бұрын
I have viewed many video tutorials, your is by far the best. Clear images, zooming in at key points, dangling labels, clear narration. placing emphasis on critical areas. You are a TEN! Congratulation!
@Autofixpals6 жыл бұрын
thank you. that means a lot. I try to make quality content.
@ibrahimnaser714211 ай бұрын
Agreed
@dgordon9645 Жыл бұрын
One of the best detailed vids on boot replacement. I do my own i made more work for my self by taking complete axle out unbolted bracket from engine few years back now i know you can break it from the hub that the boot seats with iner clip releasing tri pod bearings. Australia X-Trail T30 boot $23 3 hours labour. Can't believe price's I'm seeing in comments 😮
@lrunyan65 жыл бұрын
Sincere thanks for putting so much detail and narration into this video. Helped me do this earlier today.
@aaronjerome50843 жыл бұрын
I watched this video after seeing your comment on the 1A Auto video and this job went from a I'm gonna take it somewhere to a yeah I can do this. Very well done and thanks for the great video.
@mturawa5 жыл бұрын
Excellent video with detailed information. Keep up the great work!
@MrAnomolous6 жыл бұрын
Well you just saved me like $600! Very clear and detailed instruction. Literally the best auto repair video I have ever seen on youtube. Thanks bro!
@jeremyjemison33446 жыл бұрын
Video was very helpful, made the job easy, my first time and it only took me roughly an hour and a half. Thank you for posting this video.
@rickwilliams43424 жыл бұрын
I read through a bunch of comments to not reiterate information but I used to manufacture the 3 legged part inside the boot and we called them spiders. Not sure why but the teeth inside are called splines and the reason it fits one way but not the other is that they are cut at a taper. Not flat. On the shaft and the spider to match. Your 100% correct they need to go ONE way. Great video. You told right. I just thought my comment would explain why. I do have a 2009 rouge. Love your vid 👍🏼 liked.
@Markoni13 жыл бұрын
I just completed this job and I must say that the video you made is amazing. You are the man. I am an amateur and it took lots of patience and perseverance but I managed to finish the job. The only issue is that the area behind the rotor, when the wheel spins is making a bit of a noise because of all of the rust in the area. I took it for a spin and that little noise is beginning to disappear. I will apply some car brake cleaner tomorrow and see if that helps. Thanks a million.
@yogiberra475 жыл бұрын
a sensational video, I now have the confidence to replace the boot on my daughter's Rogue,...superb !!!
@daveatteberry63874 жыл бұрын
Thanks for showing the exact tools and socket sizes! Saves a lot of return trips to autozone. Also the correct alignment was helpful. Think I can tackle this now. Agree with others, best repair vid on you tube so far. 👍
@Autofixpals4 жыл бұрын
Wow.. Thank you. Im sure you can do it, just make sure you have a good set of snap ring pliers and some safety glasses for that part of the job.
@carlossoto5826 жыл бұрын
Great video! Explained and showed the entire process perfectly! Thanks!
@yhird4 жыл бұрын
Outstanding instructional video. Great demonstration and narration. Great job and thank you!
@user-kb1qn6qd8p8 ай бұрын
Those instructions were crystal clear. Thank you so very much!!
@onehitpick97584 жыл бұрын
This is the best vid on this topic by far. I'm going to do this within the next couple of weeks, assuming I can get the parts.
@johnkontogiannis60704 жыл бұрын
Excellent video, thank you. It helps to be able to tell if they are ripping you off by knowing what it is involved in doing the work.
@arochoaa3 жыл бұрын
Really helpful and Thumbs up for the video. I was doing brake work this week and noticed the same exact problem on my rogue. Got the repair kit and changed it today.
@clintprice21236 жыл бұрын
Guess what kit I’m ordering tomorrow? You did an excellent job in explaining it and doing the repair too. Glad I found your channel.
@atxjax15 жыл бұрын
Thanks sir. Good to know this can be done without taking the trans side off. Will help avoid spills of CVT fluid
@philblanco36084 жыл бұрын
thanks so much for thise video , it help me install the new replacements, and save a lot of money , instead of paying , those little hints were absolutey GREAT!!!!!!! too many other videos forget those small hints , saves making mistakes that could cost to the repairs due to accidental added processes. i will be looking for more , especially on honda crx , i try to do all of my own repairs and maintenance , im thinking of repairing my clutch plate and pressure plate, well , thank you again , ciao 4 now
@timhiller10294 жыл бұрын
Excellent job and well documented thanks for the high quality job, it’s nice when folks care about quality
@Autofixpals4 жыл бұрын
You are very welcome. Be sure to share my video if you can. Thanks.
@cecilmosby49585 жыл бұрын
Fantastic video Sir and so clear to understand. Thanks and now I know what I have to do and not get ripped off again. And you saved me $425.00.
@Cohobapr5 жыл бұрын
Bro great video!!! Very well explain and very professional! You’re gonna save me soo much money!!! Thanks for real!!
@bigfathand55226 жыл бұрын
Awesome! Great job and professional quality video. Excellent presentation skills and calm and confident to expain every single steps in detal. Am following you for new videos. Many thanks.
@Juanrodriguez-fu6bj Жыл бұрын
Awesome . Thanks for all the attention to detail ! You make it look easy .
@stevenburns6731 Жыл бұрын
This is a fantastic video. I've done this before and I made like every mistake he said not to do haha. Good stuff
@ronbunker5778 Жыл бұрын
Great tutorial! This makes the job a lot easier!
@stevegilks6 жыл бұрын
Outstanding! Cleared up a lot of questions I had. Nicely done!
@locovidepro3 жыл бұрын
Bro, I am a videographer and I was looking for a good video to fix my moms car and your video is was really good filmed and explained. Great job on those videos. Thanks
@bimmer80374 жыл бұрын
Excellent presentation. Best auto repair video on the subject. Thanks
@Autofixpals4 жыл бұрын
Your Welcome
@carlosmunoz79346 жыл бұрын
That's the best video I ever seen on KZfaq very well explained ...............and very professional ..Thanks
@gravhammerman6 жыл бұрын
This is an excellent instructional video. Superbly done. Thank you, sincerely.
@Autofixpals6 жыл бұрын
gravhammerman you are welcome 😀
@BillSW2 жыл бұрын
the best video ive seen. great voice and tips
@louiev35775 жыл бұрын
Good video. I just subscribed!!! You just saved me a lot of money!!!
@thelawnslayersceo30725 жыл бұрын
Much better and easier than auto 1 they make u think u need thousands of dollars worth of tools and a Jimi newtron brain to get a simple job done.well done man great video
@Autofixpals5 жыл бұрын
Thank you. Its really not too difficult of a job. glad you like the video.
@UGAexploder3 жыл бұрын
You should have 12M more followers man...this is a great video.
@bradleys23202 жыл бұрын
Excellent camera and lighting.
@mhow70246 жыл бұрын
Superbly detailed. I don't think anyone else does it like that on KZfaq for cars . Thanks a bunch.
@trustbran5 жыл бұрын
Awesome DIY dude!!! I subbed and don't even have a Rogue.... wish you could do some DIY's for the R35 GTRs.... Thanks for being extremely informative! -Brandon
@jamesobrien34376 жыл бұрын
Also truly believe you could build such a big following on KZfaq with more videos and a wider range of vehicles. Such quality content!
@Autofixpals6 жыл бұрын
it takes a LOT of work to make my videos high quality. Which is why i don't post new videos as often as i would like. i have about 15 videos taking up about 1 terra byte of space on my PC that i have not even edited yet. I do enjoy making them though. Thanks for your support i really appreciate it.
@Jsantiagounderscore56 жыл бұрын
Tackling this job with my dad once my part gets delivered. Thanks for the clear, organized video and parts list. We'll be referring to it.
@ibrahimnaser714211 ай бұрын
Made it look easy man appreciated
@chrisvantran18455 жыл бұрын
Awesome video man you just saved my ass at work haha! Had no idea why the roller bearings didn't come out that cup easily. Att least I won't mess up the other side. Great video and well put together. ✌
@Autofixpals5 жыл бұрын
Glad it helped Chris.
@BruceLyeg6 жыл бұрын
"unless you wanna hit somebody in the eye with a snap ring"... Lot of truth there brother...
@Autofixpals6 жыл бұрын
Bruce L. I can think of a few folks I would like to have hit in the eye with a snap Ring...lol.
@amiyahira5 жыл бұрын
Nice job! I would suggest an alignment since you removed the strut bolts. Just a little amount of camber movement will affect the alignment toe readings. To minimize toe and camber movement, you can remove the lower ball joint instead of the strut bolts. A little more work since you now have to separate the ball joint and maybe tie rod too. If you plan on doing an alignment, then I would probably do it the way in this video.
@doncordero75286 жыл бұрын
Appreciated this video. Helped me out of a jam!
@simplysensy8 ай бұрын
thank you very much for the great clear and detailed video.
@CSG10272 жыл бұрын
Dude. Great work and fantastic video. Subbed.
@richborzea45896 жыл бұрын
great video! like how certain details were explained, where as most guys leave you to guess.
@Autofixpals6 жыл бұрын
Rich Borzea thanks, I appreciate it.
@shanepassafaro43395 жыл бұрын
nice! Wish I had a car lift in my garage! thanks for the clear video and instructions.
@Autofixpals5 жыл бұрын
i wish i had a lift in my Garage too. Its just not tall enough.
@ddsmarine3 жыл бұрын
You made a great video. Thanks!
@TD16V4 жыл бұрын
Nissan part number nissan c97da-ja00k (for AWD, I believe FWD is a different #). Local dealer price was $41 as of Jan 2020 and they had it in stock. Cheapest online price I since found is $32. You won’t get a generic aftermarket boot to fit as it needs that weird profile on the larger internal end of the boot you can see clearly. This video is great BTW. My boot had only a tiny split, and I didn’t need to remove the three rollers off the spider. Finally, the Nissan kit is great; it’s got the fantastic stainless OEM retaining rings (much better than wire ties) and a big tub of CV grease.
@deniscleary137 күн бұрын
Excellent video thank you so much indeed and no need to pull the axle out of the transmission 😉
@BigDaddysGarage6 жыл бұрын
Saw you in the meet up video. Figured I'd check out your channel. Glad I did! Your videos are awesome!!!
@Autofixpals6 жыл бұрын
Flint Layfield thank you Flint. I don't post videos very often but I try to make sure the quality is really good when I do...hope you subscribed.
@BigDaddysGarage6 жыл бұрын
Auto Fix Pal of course I did!
@colinbuckley40263 жыл бұрын
Fantastic video and instructions!
@perryfuller1163 жыл бұрын
Great instructions!! Appreciate it!!
@mikerykaczewski91416 жыл бұрын
Excellent video! Well done! Thanks
@JoseLopez-ie7ns4 жыл бұрын
Good job my friend ,very handy thanks
@magsteel989111 ай бұрын
Really good instructional video. Very clear, very detailed. Even though I ordered the CV axle I'm considering doing this instead to avoid hassling with that potentially frozen bearing holder. One question though: Given how thick that grease is, why not fill the metal cup with it before inserting the bearings? It doesn't seem like it can drain out during reassembly.
@dannydnice14 жыл бұрын
Excellent video
@tomzphone Жыл бұрын
best video ever
@heyitschinoable6 жыл бұрын
Really nice video bro!
@TortureBot6 жыл бұрын
Thanks for the very detailed video. Nice to see someone taking time to do the job well. My wife's 2011 Rogue needs this done (shop found it during a tune-up/oil change). I don't have the tools or space to do it, although I do as much as I can to our vehicles myself. Always like to familiarize myself with work that is to be done to our vehicles even when I am not the one doing it. Makes it easier to talk to the shop and helps me make decisions as to whether the techs are being honest. Fantastic video!
@Sheeeeeeeeeeeeiiitt2 жыл бұрын
I’m in the same situation. Curious what the repair like this goes for? Any ballpark figure so I can mentally prepare myself lol? His videos really are detailed and certain giving me some insight.
@TortureBot2 жыл бұрын
@@Sheeeeeeeeeeeeiiitt I'll have to check our receipts. Seems like it was between $300-400.
@Sheeeeeeeeeeeeiiitt2 жыл бұрын
@@TortureBot thank you, the dealership quoted me over a grand for parts/labor. To the tool store I go lol
@TortureBot2 жыл бұрын
@@Sheeeeeeeeeeeeiiitt just checked & we paid $287 + tax. $177 for labor & $110 for the part. We got quoted over $1000 from the Nissan dealership, too. Ours has been going for almost 2 years since the repair.
@Sheeeeeeeeeeeeiiitt2 жыл бұрын
@@TortureBot had the job done today by a local shop. They used Durlast Gold I believe from auto zone. Said I needed an alignment as well. I paid a little over 380 after taxes. Kept the original part though…They asked me why I wanted it and I said incase the new part fails. All it needed was an inner boot. Barely 80,000 miles. Thanks for replying and sharing the quotes.
@shannonbradley63966 жыл бұрын
Great video sir !!!
@Autofixpals6 жыл бұрын
Shannon Bradley thank you shannon
@nedster21173 жыл бұрын
mate your the mutts nut, top man thank you from the uk
@mazur5816 жыл бұрын
very good video, thanks man
@robertswaim57065 жыл бұрын
Awesome job I had one seize a few months back parts labor and tax was 585 they also changed the bracket does that sound correct Nissan however did not reimburse me for the parts since a private garage did the job
@wuxianku4 жыл бұрын
great money save video. Thanks
@sstritsman6 жыл бұрын
Great video
@markw67452 жыл бұрын
Well done, top vid
@jeremywheeler80635 жыл бұрын
Awesome video! Would this application be the same for a passenger side inner dust boot on a 2011 AWD Rouge?
@7Westwood6 жыл бұрын
Miss your videos....
@TheJackBaker5 жыл бұрын
Thank You my friend!!!
@thebigdrakos4 жыл бұрын
Thanks Bro, you are awesome !!!!
@AssadNiang3 жыл бұрын
Great job!
@Soothsayer-rs5nb4 жыл бұрын
Great video ....thanks
@roaminglife964 Жыл бұрын
Thank you . Do you know why nissan murano doesn't have a clip and I can't take out that Trident bearing
@andrewwmacfadyen69586 жыл бұрын
Most shops these days use a stretch boots and a boot expander tool or for DIY just a cheap fitting cone no need to dismantle the pot joint or remove the shaft from the car works for both inner pot joints and outer CV joints.
@Autofixpals6 жыл бұрын
Andrew W MacFadyen will it last 100k plus Miles without leaking?
@haawaii4 жыл бұрын
Wow! Thank you so much :) do you have the link to the boots? Cant find them anywhere. Or how do you measure that special diameter?
@a475985 жыл бұрын
fantastic video!!! Your side comments are great, made me laugh several times!
@Autofixpals5 жыл бұрын
Thank you very much. Glad you enjoyed.
@mava56345 жыл бұрын
very well explained, ha and good music
@Autofixpals5 жыл бұрын
🔧👍😁
@imartyficationv.2763 жыл бұрын
I checked other 2013 Nissan Rogue tutorial and they unscrew the 1 bolt in the bottom arm control bracket instead of the 2 bolts in the strut. Can I use your method for my 2013 Nissan rogue because it seems harder to remove the bolt in the arm control than the 2 in the strut?
@johnjones-no3vd6 жыл бұрын
very good video.
@roaminglife964 Жыл бұрын
Thank you . I saw your video and try to do my murano myself but I find out it's different . 😭
@miketaylor5143 Жыл бұрын
Does the same part number work on the inner boot on the driver's side, same year Rogue? Tks
@zhivkomarinov54494 жыл бұрын
There are crooks in the NTB service who lie about the price of replace on new axle as well as the cost of labor. They put in 2 hours of labor where 1 hour costs $ 127. All in all it cost me $ 500. Time of replace of brand new axle cost no mere than 30 min. When I wanted to see the old axle that had been replaced because of a damaged axle boot, they showed it to me. When I told them I wanted to get it, they refused to give it to me. But after an increased tone on my part, they gave in and gave it to me. I will now replace the axle boot with this repair kit and will haves a backup axle.
@Autofixpals4 жыл бұрын
Lots of times they keep the old axle to send back as a core. They are often re manufactured using the old parts. if the Dealer to repair shop does not return the old part they get charged extra money.
@aksilsak53525 жыл бұрын
awesome and detailed video i have a 2013 nissan rogue ,and im looking for the exact part number for cvt valve body ,if you can provide it it will be appreciated :)
@royalway123 жыл бұрын
Any ideas on suspension clunking sounds on a 2009 Rogue.
@fiddymil4 жыл бұрын
@Auto Fix Pal does this work for the passenger side too?
@TheDickMan_4 жыл бұрын
Can the passenger side inner boot also be replaced like this without removing the entire axle out?
@shanepassafaro43394 жыл бұрын
any chance you have the part number for the clips on the inner closeout panel? Great video, I replaced the RH inner boot a couple months a go and today the the LH inner boot was dripping grease on the garage floor. Thanks for taking the time to make such a detailed video.