2013-2020 Infiniti QX60 3.5L spark plug replacement.

No video

2013-2020 Infiniti QX60 3.5L spark plug replacement.

Рет қаралды 12,044

Күн бұрын

How to change, remove, replace intake plenum, clean throttle body, and do spark plugs, on a QX60 or Nissan Pathfinder. This was a year 2018 model.
Disclaimer:
Due to factors beyond the control of Rust Belt Auto, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Rust Belt Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this video at your own risk. Rust Belt Auto recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Rust Belt Auto, No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
2014 2015 2016 2017 2019 15 14 16 17 18 19 20 3.5 V-6 v6

Пікірлер: 31

@5ehart 3 ай бұрын

Decided to tackle this job after watching a few videos. Your video was the best to get a feel for all the drama ahead. Agree with several of the other comments, this is a ridiculous procedure to change plugs, but it only cost me less than $85 for the 100k Denso OEM plugs, 2x gaskets, anti-seize, spark plug socket and throttle body cleaner (thanks to Amazon). It took me about 2 hours including the throttle body cleaning (not rushing). Not sure what the dealer wants to do this, but can bet it's way more than $85. If you have a 10mm socket, needle nose pliers and several extensions with 2 hours to kill you can definitely knock this out and save a ton of money. Not sure how much time I would have saved with an electric tool. The bolts are pretty easy to get out manually. Note that I got the 100K plugs because I don't plan on doing this again for another 8+ years (if I still have the vehicle).

@michaelpalombo3304 Ай бұрын

Dealer just quoted me $720 to do this. Car is my daily/family car and not my "fun" car that I maintain myself. Normally, i let the dealer handle maintenance, but I believe $100 and a couple of hours of my time is well forth saving the 600 or more extra the dealer would charge...

@moosemcguirk1640 6 ай бұрын

Excellent video thank you. I looked at many for this vehicle and yours was right on for specific information without talking aimlessly. Love the humor.

@RustBeltAuto 6 ай бұрын

🎯

@russkelley5477 Ай бұрын

Thanks much. I wasn’t going to attempt this but after watching this a couple of times it’s done. I owe you a beer at least!

@steved7563 7 ай бұрын

This looks like a $800 dealer job, hope you got half that

@RustBeltAuto 7 ай бұрын

I work for IGA usalted peanuts in the shell.

@coreyh7641 Ай бұрын

$1100 from Infiniti in Fort Worth TX, $800 # Nissan

@rayp.454 7 ай бұрын

I would junk that car before I did all that work just to change plugs! Great engineering. I give you credit for doing this.

@1994Trill 6 ай бұрын

This is absolutely fucking ridiculous that you have to do this much. Thank you for the video though !

@minang7479 3 ай бұрын

My local Nissan dealer charges $566 for doing these 6-cylinder spark plugs.

@hpTauber Ай бұрын

I have this vehicle. 120k on the clock. One problem so far with an engine cooling fan that goes on strike every 40-50k. No problems otherwise.

@alexthemechanic8110 7 ай бұрын

Look at you working with battery tools. 😂 Good work as usual❤

@CrikyKami 12 күн бұрын

Yooooooo! Thanks for the help

@BarnStangz 7 ай бұрын

Watching you work on a Nissan pile makes me think about needing to work on my Nissan pile.... Valve cover gaskets... Ugh.... That's going to be a job. Hope you're treating yourself to some good finds at Manards. Okay bye!

@Mtechthewise 4 ай бұрын

Did you happen to look down the intake ports to see if there was any GDI junk build-up on the intake valves?

@josepalacios5927 3 ай бұрын

Thank you 🙏

@tbskirk 7 ай бұрын

That looks like a job okay bye 👌🏽👍🏽

@eagle___empire3175 6 ай бұрын

Thanks, about to tackle the beast, pain in the arse, but not impossible. Think I should do the coils while Im there?

@RustBeltAuto 6 ай бұрын

The coils you buy will probably be of lower quality. I say if it's not broke, don't fix it.

@eagle___empire3175 6 ай бұрын

@@RustBeltAuto Great point... I went with spark plug boots instead of the coil it self. Thanks

@thegrossmansmx 4 ай бұрын

My thought process is on a big job if you gotta take it off and it has a gasket just replace that gasket. Theyre usually under $30 and it saves the customer and yourself as a technician the headache of it later. Id rather have the happy customer not the ever since you customer

@RustBeltAuto 4 ай бұрын

I can agree, because you have customers.