One of the best DIY videos I've ever seen. Very clear, straight and to the point. The dealer wants over $600 to do this. You saved me a lot of $$ Thanks

I appreciate you so much for making this video. Clear instructions. Clear lighting. No BS. You saved me a lot of time and grief.

Remember to use brake clean to clean off oils from rotors but thanks for this video it was perfect amount of information unlike half of the youtubers lol

Best brake video I've seen for the 350 yet! Should make more of these for the lexus. I'm prepping to do alot on mine and saved this one to a playlist =]

Great video, man. I knew the basics from doing this work on other cars but you did a good job showing some of the tips and tricks specific to the IS. Even stuff like knowing the bolt head sizes is a big help.

Great,concise how-to video. You have given me tremendous confidence to service my 2015 Rx350. 😊

Thanks bro, I do have the same system on my 2006 IS350, your description is accurate.

Great video, thanks for taking time to make this available to all!

Just got quoted $1100 to replace just my brake pads on all four tires! Thanks for the video, saved me about $1000!

Great vid!!! Will come in handy when I change out my rotors

The bolt to pop off the rotors is a M8x1.25

Wow amazingly clear. Fantastic video.

Good job with this! Very thorough!

Perfect apart from the 17mm headed caliper bolts need to be torqued up with a torque wrench to 78Nm to prevent the coming loose. Also consider using Thread lock on these large bolts too.

Good video. Simple and easy.

Thanks for the video. Just did my pads on my 2015 IS350.....Upon completion I was angry that the dealer wanted 400 bucks for such a ridiculously easy job...lol

Awesome, thanks for making this video man.

This works on my RC 350 Fsport !!

I worked with a guy named Ankit Patel and he was from India. I've not seen that last name since then until I seen your video just now. Wondered if there was any relation between yall. Thanks for the video as well brother! We need brakes so bad and didn't know it was this easy! Thought I'd have to bleed them an all that crap.

you the man brother

thank you. Helped alot !

This video was PERFECT! (Except one small thing: bolt size needed is m8x.125) But yeah, made the job super easy. Love this guy.

Great video and information!!

Wow thanks for the video!

For the general public. This is also the correct procedure for an RC 350.

Awesome video thanks

couple things to add. check brake fluid level and remove cap if really full, this will prevent brake fluid from spilling over. also, you can use a wire brush on the hub instead of sand paper and also inside the caliper to remove all the brake dust. lastly, cooper anti seize is better has the properties prevent it from breaking down less than the silver.

Thanks for the video

back again to thank this guy again... and wonder why the left brake pad wore out so fast while the right was totally fine. either way, my evening sucked, and would have sucked a lot harder without this video to reference. thanks dude.

Saved all of us 1,000$ plus

Thank you for the clear instructions, you made me want to do mine too! Btw, how’s the PowerStop brake pads and rotors from your day to day driving so far? I am also considering buying PowerStop series. How long did they last you?

Great video!!! torque for caliper bolt?

Thanks for sharing bro

Got a video for the rear??

how much will cost front brake and rotor 2013 G s Lexus

Good job 👍

Yeah I might go to dealership to diagnose it since my car is still the new car 5 year warranty so they should provide me a free diagnostics. Anyways, thanks for your hope bro. I really appreciated it!

shit ton of anti-seize. Guess it doesnt matter unless it slings a drip on the rotor. I love how our caliper pistons seals can be replaced without removing the caliper. Not as helpful as you would think but still. I just ordered my front rotors and pads, 20 inch Vossens, and have axel back Joe Z sitting in spare bedroom, just need tires for the 20s and dont want to change ride quality so I am going to go with a new tire I have used once before. General G max. 800 for 4 isnt bad...

DUDE....you put the passenger side rotor on the driver side 😂 the slot and hole direction are opposite. Can’t imagine it would cause too much harm...maybe performance loss. other then that, great video! Bought the same kit snd it arrived today, about to do my 2018 IS350 F Sport AWD

Hey! Great video! I was just wondering if the mounting bolts for the calipers had some kind of coil thread for you? I just did mine and had to remove a broken coil thread on one of the mounts. Not sure if that was OEM.

What is the thread size for the bolt to remove rotor?

really good tutorial @ankur Patel. do you have rear brake tutorial as well?

awsome video, do a vid on changing the back brake pads when you can!

Thanks for the great video. I see that you have the brake pad shim kit. Can you please confirm if the order of setup is -> Pad | Coated Shim | Non-coated Shim | Caliper Pistons

Great video. What is that tool to remove the pin from the back of the caliper?

Hey great video, I replaced everything but when I go over bumps/ cracks in the road I can hear brake pad chatter. If I barely press the brakes the noise disappears. Any idea? The brake pad rattles in the caliper

Great video! What’s the size if the bolt to remove the rotor?

Do you know how tight you're supposed to tighten the bolts that hold the brake calipers or does it matter?

Wonder if good idea to put so much anti seize behind rotor? Maybe need some friction there so it stays put without any play

Hey Ankur. Did you have to put the car in service mode ? Did open the brake fluid container ? Did you have any errors trapped air after recessing the callipers in?

Great video!! What's the size of the bolt that you used to pop the rotor out?

what size of the powerstop rotor？

Question. Did you use oem brake pads? I used akebono pads they fit but i had abit of a struggle to get it in, but i cleaned up the inside claiber n then they went in after some wigglin 🤫 lol Thank you btw camera setting n everything perfect good video.

Awesome video, what size is that bolt to break the rotors free?

Hi Ankur. I just purchased a 2015 Lexus IS350 F sport over the weekend and it needs new front brakes. I was wondering how the Power Stop kit is holding up for you and if you have had any problems with it? Thanks so much for this video!

How I’m shopping around of rotors how’s the performance of that rotors they said no squeaking., and brakes stronger?

Hey how are the powerstop rotors? Looking at replacing mine as well and I saw these on rockauto!

can I just change rotors on the front and not the back? keep the stock ones on back? please let me know thanks

Was this the front or rear? I have 2019 and I'm having problems finding front rotors... rears are everywhere... I'll call powerstop tomorrow. What size is the bolt too pop the rotor?

MY BRAKES ARE DOWN TO 50%. WONDERING IF I CHANGE OUT THE PADS NOW , MAYBE i DO NOT HAVE TO CHANGE OR RESURFACE THE ROTOR?. IS THERE NOW AN AFTER MARKET ROTOR FOR F SPORT... I HAVE GS350 2013? WAS LOOKING AT THE BOSCH ROTOR

So the is350 model 2013 and under big brakes can be used on a 2014 is250? Like are all the big brakes the same on the 2013 and below? I’m new to the Lexus , or only the 2014+ 350 f sport calipers will work?

@4:31 it says on the sticker "Front Pass Side". Was this correct side? Nice to see something i can follow with my son. Btw, how many jacks you used while working? Thanks.

How did these rotors do as far as performance and braking in general? And did you change the rear ones?

Can you tell me where you get the bulb to remove the rotor?

What size is the screw you use to take the rotor out?

What size bolt used to screw and release disk

Hey man have you had any squeaking issues with these pads? Just did some akebonos on my 2015 RC350 and it squeals like a mother!

What size mm bolt was needed to help release rotors? 2 holes also do one in each alternate tighten them?

Great job on video! What size bolt to take out the rotor?

What size bolt did you use to pop the rotor off?

Quick question, how are the rotors and break pads working now? Please be honest(:

What is the torque spec for the caliper bolts? I'm assuming rwd and awd torque specs should be the same?

How did these work out for you? my front brakes squeal every morning and it's driving me nuts

It has almost been a year, how are the brakes holding up? How many miles have you put on them? Would you still recommend them? Thanks!

What is the benefit of these disks bro? What difference do they make ? Do they have any drawbacks?

How many pistons is the caliper?

Hi, I am wondering can I just replace the brake pads only thanks!

Wouldn’t the rotors come off if you just hit them with a hammer even if it was rusted?

Will this work for a 2006 IS?

Will this work for the 2018 model?

it's cost me $500 just for the pad and rotor for the front wheel..i have 2016 IS350..why it worn out so fast..

I wonder why all toyotas dont have "sport" or jaguar style brakes. Sure looks like they wore all the way down evenly.

Great vid but I think you installed the rotor on the wrong side. Its said front pass....

Nothing different for a 2016 Is350 f sport ?

It sounds like my rotors or touching the brakes

your rotors are on backwards... the slots should be pointing to the middle of the car (from the top)

U have the rotor going in the wrong direction. Says passengers side on the sticker on the hat of the rotor. The rotors are directional to push air out.

Wrong rotor on driver side, the rotor should go to the passenger side( SEE THE LABEL ON THE ROTOR)

Did you know Callahan brakes & rotors are made by powerstop & cheaper 😂🤷‍♂️

YOU PUT THE WRONG SIDE ROTOR ON it DO said on the rotor PASSENGER FRONT !!!

You're very huevudo lol no disrespect. What type of bolt did you use to remove the rotor. FYI huevudo is a Spanish word meaning you have huge balls lol

Wow, is this your first time doing a brake job because, you did everything wrong.

Drilled brakes aren't necessary for that car.but meh