I know I wish it was an LS swap too. But its not. They're keeping her stock.
Пікірлер: 61
@rickghostkeeper310910 ай бұрын
I spun a rod bearing in my 2016 Accent, this video has been my guiding light all the way. I can’t express how much I appreciate you posting this video!
@inspectorjavert5563Ай бұрын
were u able to do it
@ScroatBagGarage11 ай бұрын
Nice work, that looked easy. Getting ready to do my step son's 2014 Accent. 80k and it's knocking pretty loud. Located a lower mile donor to swap. He didn't stay ontop of oil changes and is kicking himself now. Excellent video (background music would be nice). Keep up the good work!
@Eatmeatthereforeiam Жыл бұрын
Can I replace the 1.6 with a 1.8 liter engine.
@Dominic435 Жыл бұрын
hello guy's how can i check in paperwork if the engine is the original or have been changed...recently i been to service because the car have hesitate when i accelerating and the mechanic say something about the engine is not original
@timekeeperg96512 жыл бұрын
Thanks a million for this awesome tutorial...40 min and the engine was out...i was stressing over this job for a week now...cause i have to replace the engine in my wifes 2014 hyundai accent! i been quoted up to $2500 just for labour alone and from 950 to 1700 for a used engine! i could do this myself over a weekend like nothing im sure! ill be lacking the hoist and engine crane though...so ill see if i can rent of those cranes somewhere i could put the car on jack stands for the work underneath! obviously $2500 in lab plus tax is pretty much robbery! wouldnt mind paying a shop rate of $100 /hr if they would charge the actual time it takes...im sure a seasoned tech. can do it in 3 hrs and the shop is making money @$300 for this re and re. i was in business for over 30 yrs in the autoglass trade and never ripped anyone off....especially not for $2500...thats just retarded!!! anyway i truly appreciate this video Sir. sincerely !TK
@rotaryskratch18 Жыл бұрын
Fyi you're wrong, and 3 hours? Please put down the crack pipe.
@CarMechaNick Жыл бұрын
Wrong about?
@dragsterk1520 Жыл бұрын
Got quoted $8,000-10,000 just for the motor
@raineth60499 ай бұрын
@@dragsterk1520whyyyyy
@raineth60499 ай бұрын
@@rotaryskratch18 This Engine took 41 minutes to remove. Do they take longer to put back in
@joellosoya7098 Жыл бұрын
There’s no audio ?
@homieog5269 Жыл бұрын
Thank you so much sir and you save me so much time
@CarMechaNick Жыл бұрын
Thanks for watching! Glad it helps!
@williammorken74846 ай бұрын
Taking the front bumper off is the way to go if you have a way to recover and recharge the ac. remove coolant hoses, disconnect ac lines towards the top left of radiator, remove bumper, save hours.
@lukevyner8 ай бұрын
I’m currently doing mine, I don’t have bolts into the transmission though, hope it just slips
@victorhinds91942 жыл бұрын
Hey my man. I got a question for you. My wife's 2016 hyundai tucson's engine seized up. Full of oil , and everything. I was wondering if there were any engines that would swap in its place.
@CarMechaNick2 жыл бұрын
You should be able to find another factory engine to put in it. Either a remanufactured engine or a used one from a junkyard.
@lrncephil802 жыл бұрын
If you did the 953 campaign Hyundai should be replacing it for you under warranty
@freddytait7726 Жыл бұрын
Is there any sound ??
@2dfx Жыл бұрын
Love that jumpscare at the end.
@CarMechaNick Жыл бұрын
I had to watch it. 🤣 so sorry some vids don't have audio lol
@roostercogburn7243 Жыл бұрын
@@CarMechaNick I figured you were cursing the entire time. "It's only a 2015 for f#$k@ sake!" Lol
@damianconstantino58142 жыл бұрын
Sound?
@Alienmadeit789 ай бұрын
Hello everyone I was wondering if anyone knew what was that plastic cover called on 29:13 I have some leaking on my car coming from there but I can’t seem to find it online, thanks for the help.
@CarMechaNick8 ай бұрын
It’s the access hole to the converter bolts.
@louiegetz547013 күн бұрын
Why no volume
@luisleyva1184 Жыл бұрын
29:16 what step was this for? What size socket goes on the bolts?
@CarMechaNick Жыл бұрын
Those are torque converter bolts being removed. I think a 17mm in these.
@luisleyva1184 Жыл бұрын
@@CarMechaNick thanks
@roostercogburn7243 Жыл бұрын
Why would you need to take out the entire engine in a 2015 model vehicle?
@CarMechaNick Жыл бұрын
It went bang bang
@TommyG118142 жыл бұрын
Another Hyundai with rods through the Block.
@CarMechaNick2 жыл бұрын
Hahaha we get lots of see through motors. More people are allergic to oil changes than you think! 😂😂
@TommyG118142 жыл бұрын
@@CarMechaNick I couldn't agree more. Great videos by the way. Keep up the good work 💪
@CarMechaNick2 жыл бұрын
@@TommyG11814 thanks I'll keep them coming!
@victorhinds91942 жыл бұрын
Hey, I got another question. What years are compatible with a 2.0. Or are they kinda year specific
@CarMechaNick2 жыл бұрын
I'll be honest I don't know I let the parts guy and my service manager figure that out. They are the ones calling the scrap yards and dealers.
@timekeeperg96512 жыл бұрын
Is it worth doing such a repair? or will the same happen again with the replacement engine? seems that they are the same engine from 2011-2019. So why didnt hyundai correct the problems after the first year or two? was it simply a data error? Should i take it to a dealer after the engine swap is done for software updates? also...is the 2014 accent covered by the massive recall hyundai out? is the 1.6l 2014 accent part of that huge recall? our just started knocking..louder than usual and then smoked ,,,then lost power and finally stalled. but when i tild my wife to check the oil she said there barely any on the dipstick! now my mechanic doesnt want to open it up for fear of the extent of damages...he cleared 7-8 codes...then noticed a coil was faullty... then said he noticed a prob. with timing belt/chain or gears and thats when he refused to go any further. im debating if i should put a used engine in and give the car to my kids...again...i truly appreciate you help with my dilemma! im open to anyones suggestions so...feel free to reply to my comments...i am grateful for any and all help!
@CarMechaNick2 жыл бұрын
You can call the dealer and give them your Vin and they can tell you for sure. It stinks when there are issues like these with cars. The chevy 2.4 is a pile of crap also. These are super easy to replace, you should look for a low mileage if you go the used route, just stay on top of fluid changes, that's all you can really do.
@timekeeperg96512 жыл бұрын
@@CarMechaNick ive done that and received no reply after 3 days...i will try again and from there wither call...or go straight to the service counter. Thanks for your quick reply Nick! thats how you run a business...i spent 30 yrs owning and operating an autoglass franchise...and thats how things are done! The video help boost my confidence to attempt the repair myself...things are always easier than imagined...people just fear mistakes. i lack the hoist and engine crane though...id first at least need the crane...the rest i think jack stands would be all i need. again thanks for everything!! keep up the great channel!!!
@CarMechaNick2 жыл бұрын
@@timekeeperg9651 customer service is everything. Otherwise they won't come back! You're exactly right. Mistakes happen, learn from them, and move on. You got it! Harbor freight has great hoists at a great price.
@timekeeperg96512 жыл бұрын
@@CarMechaNick repeat business is your best advertizing...i closed 2 competitors with service...it was super simple...all i did was clean every customer's car inside and out...everytime!!! people would comment more on that than the fact i just replaced their windshield!!! i got repeated thank you letters sent to our head office...our president was amazed at how much of a difference it made on the whole franchise...although other franchisees didnt like the fact that some customers questioned them on why only my franchise gave such service...so i bruised a few egos..lol even only topping up their washer fluid makes a huge difference! just always give them more than they expect...and i promise you will get people talking about your services! Good luck young entrepreneur! you will be successful with your great attitude!
@CarMechaNick2 жыл бұрын
Thanks a million!
@arturololiv Жыл бұрын
I thought I had gone deaf
@CarMechaNick Жыл бұрын
Gotcha!
@soon3rman142 жыл бұрын
Where’s the sound?
@CarMechaNick2 жыл бұрын
You have to make the impact noises on your own 😁
@raineth60499 ай бұрын
Nobody will touch mine 😭😭😭
@CarMechaNick8 ай бұрын
Awe man what a shame!
@Eatmeatthereforeiam Жыл бұрын
Some of these Hyundai engines are trash and should be recalled
@lesklower7281Ай бұрын
I have no sound but l can see why you are replacing this 2015 Hyundai engine how horrible are Kias and Hyundai's there are so many you tube videos to do with Hyundai and Kia engines none of them good they absolute piles of junk well my 1997 Toyota Hilux with 437000 kilometres on it is perfectly fine and probably will never have to be replaced at least for another 27 years
@damiangibson6075 ай бұрын
Video is about worthless with no audio
@savedbygrace246 Жыл бұрын
I guess this video was for hearing impaired.. thumbs dwn
@CarMechaNick Жыл бұрын
Just make sounds as you watch, part of the fun.
@segounlocks50295 ай бұрын
Dumbs down for someone that is saving people thousands. How much money do you think he made recording this video? Play your favorite song watch and learn. You should be ashamed of yourself. Pepole get mad for to much talking and mad when you don't talk.